Welcome to Palmetto State Armory!
Out of stock
MFR: 90375 UPC: 0766839037548
Case preparation just became five times easier and faster with the Trim Mate Case Prep Center. Five gear-driven rotating heads turn the tedious task of chamfering, deburring, primer pocket cleaning, military crimp removal and flash hole deburring into child's play. The tough, high-torque motor does all the work, allowing you quick case movement from station to station. There are also two stationary positions for case neck brushes or other useful accessories and a cupped area for securing dry case neck lube. The Trim Mate Case Prep Center includes large and small primer pocket brushes, inside chamfering and outside deburring tools, medium and small case neck brushes and a packet of dry case neck lube. There are also a number of optional accessories available.
Primer Pocket Uniformers are manufactured with carbide cutters and true the primer pocket depth. Military Crimp Removers are made with hardened steel cutters and ream out the crimp ring found in military cases.
Trim Mate Case Prep Center:
90375 Trim Mate Center (110 VAC)
90376 Trim Mate Center (240 VAC)
90377 Dry Case Neck Lube
90378 Primer Pocket Uniformer, large rifle
90383 Primer Pocket Uniformer, large pistol
90379 Primer Pocket Uniformer, small
90380 Military Crimp Remover, large
90381 Military Crimp Remover, small
90382 Dust Cover for Trim Mate
Out of stock
MFR: 88907 UPC: 0766838890724
Turret press Deluxe Reloading Kit - includes Turret press with ambidextrous handle and tube priming system, Uniflow Powder measure, 502 mechanical scale, Universal Case Load Block, Case Lube-2, Case Lube pad, Accy handle-2, sm & Md case neck brushes, Primer Tray-2, Hex wrench set, powder funnel, Speer manualLearn More
Regular Price: $159.99
Special Price: $119.95
MFR: 81190 UPC: 0766838119054
Self-contained chronograph that checks velocity of arrows, paintball guns, rifles and pistols. diffuser and supports store with housing. Detach keypad with 20-foot cord. Velocity range of 50-7,000 fps.Learn More
MFR: 90201 UPC: 0766839020168
The Universal Hand Priming tool combines features found on our other two hand priming tools into one convenient package. We took the universal shell holder from the APS tool and combined it with the primer tray from the standard tool to offer unmatched performance. The universal shell holder will accept cases from .32 ACP to .45-70 Government. The patented safety gate isolates the primer seating operation from the primer supply virtually eliminating the possibility of tray detonation. The removable primer tray orients your primers for use and will fit any manufacturers' primer packaging. Includes accessories to seat large and small rifle or pistol primers.Learn More
MFR: 90200 UPC: 0766839020090
Our hand priming tool not only seats primers quickly, it's also the safest. A patented safety mechanism separates the seating operation from the primer supply, virtually eliminating the possiblity of tray detonation. Fits in your hand for portable primer seating. Primer tray installation requires no contact with the primers. Uses the same shell holders (post 1980) as RCBS presses. Made of durable cast metal. Features large and small primer plugs. Shell holders not included.Learn More
MFR: 90350 UPC: 0766839035018
With It's spring-loaded lever the Shell Holder keeps cases securely locked in place and aligned with the cutter. It is designed for .001" accuracy even with a spent primer in the case. Works with standard pilots and features a micrometer fine-adjustment bushing calibrated for setting exact trim length.
INCLUDES: Shell Holders 2,3,4,and 10. Pilot Calibers: .22, .24, .25, .27, .28,.30, .35, .44 & .45. Two Year limited warranty.Learn More
Out of stock
MFR: 88901 UPC: 0766838890106
Simple operation- no complex or automated processes. You have complete control over every reloading step. May be operated in progressive or single-stage mode.
In the progressive mode, output can be increased from 50 to 200 rounds per hour. Or, if preferred, the press can be used as a single-stage press and load cases in the batch mode.
Rugged, cast iron frame, toffle block and turret head. Heavy-duty construction to minimize springing. Detent on Turret Head for positive alignment. Standard 7/8"-14 threads for most popular reloading dies and accessories. Six-Station Turret Head allows many combinations in the mounting sequence of dies and powder measure permits two or more calibers to be set up at the same time. Turret Head held in place by one bolt for quick, easy changeovers. Turret Pin assembly (provided for turret head removal and installation) and Ball Handle Assembly may be positioned for right or left-hand use. Standard Shell Holders slip in press ram and are securely held in place by a clip spring.
Primer Plugs and Sleeves are supplied for seating large and small primers. Primers are seated away from stacked primers. Safety tube included.
The Primer Catcher eliminates spent primers of floor-snaps off for easy emptying. Baked epoxy finish for quick, easy cleaning, chip and fade resistant.
NOTE: We highly recommend the optional Unifloe Powder Measure with Case Activated Linkage Kit for use of the Turret Press (Sold Separetely).Learn More
Regular Price: $86.99
Special Price: $79.99
MFR: 87088 UPC: 0766838708890
Fast, dry media case cleaning. Holds up to 400 .38 Special or 180 .30-06 cases. Removable lid lets you check cases during cleaning. The optional Media Sifter separates clean cases from dry media in seconds. Quiet, powerful motor is thermally protected and 1/4" thick bowl will last you a lifetime.
Not for use with liquid media.Learn More
Out of stock
The Lock-N-Load Classic Press features single stage operation, angled frame, easy grip handle, positive priming system, primer catcher and Lock-N-Load Bushings for quick die changing. Dies, bushings and shellholders sold separately.Learn More
• Cast Alloy
• Lock-N-Load™ Bushing System
• 30° frame offset
• Positive Priming System™ (PPS) priming arm and large and small primer cups included
Number of Mounting Holes: 2
• Accepts all standard 7/8 x 14 threaded dies and standard shell holders
• Primer catcher and 3 Lock-N-Load™ bushings included
• Automatic Primer Feeder available, sold separately
Out of stock
Hornady produces brass with the same precision, attention to detail and focus on perfection that has made them a world leader in bullets. After chamfering and deburring their brass, Hornady measures it for consistent wall concentricity, tests pressure calibration to ensure uniform case expansion and hand-inspects each piece.
This dedication to quality ensures proper seating of the bullet both in the case and in the chamber and consistent charges and pressures. The result is optimal velocity and repeatable accuracy from your cartridges. New, unprimed brass. This is not loaded ammunition.
Please note that brass manufacturers may recommended different primer sizes and brands of primers. Please refer to your reloading manual for primer size information.
Box of 50Learn More
This item cannot be shipped to the City of Chicago or State of Massachusetts
Out of stock
This completely revised and updated manual contains load data for almost every cartridge available, including the latest developments like the 204 Ruger and 500 S&W. Includes tips on basic reloading, rifle and handgun load data and an illustrated glossary.Learn More
Out of stock
Automatic 5-station press with Lock-N-Load quick change technology. This progressive press features fully automatic indexing, a 5-station die platform that accepts most standard 7/8"-14 threaded dies and the EZ-ject System which delivers 100% reliable cartridge ejection. The Lock-N-Load AP is capable of loading rifle or handgun cartridges with large or small primers.Learn More
Wondering what extra parts to purchase? Well, the press comes complete with a Lock-N-Load Powder Measure, case activated powder drop, cartridge catcher, primer pick-up tubes and 5 Lock-N-Load Bushings, so the only thing left for you to purchase is the easy access shellplate, dies and any additional bushings you'll need. All items in this kit feature a lifetime warranty from Hornady.