Case Cleaning & Preparation

MFR: 9348 UPC: 0766830934860

The Larger Deburring Tool allows the inside and the outside chamfering and deburring of cases from 17-caliber up to 60-caliber. Larger than our standard deburring tool, this tool is perfect for handloading cases over 45-caliber. But if you want one deburring tool to do it all, this is it. Made of hardened steel to last a lifetime.

MFR: 9351 UPC: 0766830935164

MFR: 9416 UPC: 0766830941622

Replacement chuck to fit the belted magnum and larger diameter cases.

MFR: 9418 UPC: 0766830941868

Three jaw chuck for Pow'r Pull and Kinetic style bullet pullers

MFR: 9313 UPC: 0766830931340

An excellent lubricant that's water soluble and convenient to wipe off easily with no sticky residue. Will not harm primers. Non-toxic. Use Case Lube-2 with RCBS Lube Dies or Case Lube Pad. 

MFR: 88146 UPC: 0766838814652

Burrs left on the inside of the flash hole during manufacturing can cause erractic ignition. This handy tool automatically locates the hole and quickly removes the burr. A self-centering pilot collar with an adjustable stop allows quick alignment and prevents the remocal of too much brass.

MFR: 88147 UPC: 0766838814720

Burrs left on the inside of the flash hole during manufacturing can cause erratic ignition. This handy tool automatically locates the hole and quickly removes the burr. A self-centering pilot collar with an adjustable stop allows quick alignment and prevents the removal of too much brass

MFR: 88148 UPC: 0766838814898

Burrs left on the inside of the flash hole during manufacturing can cause erratic ignition. This handy tool automatically locates the hole and quickly removes the burr. A self-centering pilot collar with an adjustable stop allows quick alignment and prevents the removal of too much brass. 

MFR: 90402 UPC: 0766839040272

The Quick Change Case Holder has many advantages over the competition. Most other units use a "tap wrench" design to hold cartridge cases. Though this is great for threading holes with a self feeding tap, it does nothing to feed youyr case neck an ergonomic design that allows you to rotatethe case and put forward pressure to feed the case neck to the cutter. The quick case change feature helps to speed up the process without having to use small obtrusive thrumbscrews.

MFR: 9336 UPC: 0766830933634

MFR: 9332 UPC: 0766830933252

MFR: 9578 UPC: 0766830957876

MFR: 9340 UPC: 0076683093400

Our Stuck Case Remover extracts stuck cases from standard sizer dies without damaging the die, using a very simple two-step removal process.

MFR: 9355 UPC: 0766830935546

The Stuck Case Remover -2 Kit lets you extract cases from dies with removable guide bushings. It's also useful for our Competition Dies or other sizer dies with a raised expander ball. Kit contains two extractor nuts and two punch rods.