Reloading Equipment

This plastic and aluminum "hammer-type" inertia bullet puller removes bullets from cartridges without damaging the bullet or brass. The hollow head captures the bullet and powder for reuse or disposal. Works with any rifle or pistol cartridges up to 45 caliber, provided they are approximately 30-06 cartridge length.

All-natural lube is applied to the case with one swipe before sizing. It prevents the cases from sticking and makes reloading more efficient and easier.

MFR # 9991

UPC: 090255299922

New non-hazardous water based formula of the most popular lube on the market. Quicly lube entire blocks of cases in one. Dries quickly. Will not contaminate powder or primers.

Adapter for Hornady powder funnel to reload the smaller 17 and 20 caliber cartridges.

Improve the function of the Hornady Lock-N-Load Powder Measure.
• This powder measure stand will accept any powder meaure with 7/8" x 14 threads
• Features an extra long arm and rigid frame

Features an oversized hopper tube with a 265 grain capacity metering unit. A see-through extended drop tube allows visual confirmation of a complete powder drop into the case. Designed specifically for throwing large charges. Mounting plate included. Stand not included - sold separately.

Precision ground and made from tool steel, this handy tool quickly and easily eliminates the imperfections left on the case neck after trimming.

Hornady Cam Lock Trimmer
MFR# 050140
UPC: 090255501407

For use with the Hornady Cam-Lock Trimmer.

This adapter replaces the hand crank on the Hornady Cam Lock Trimmer allowing you to use a battery powered screwdriver to drive your case trimming.

Hornady's pliers-style design gives you maximum leverage with minimum fatigue and a much better "feel" compared to thumb-operated styles. Works with small or large primers. Uses standard Hornady shellholders (sold separately) or included adapter for RCBS shellholders.

Specifically designed to load 50 BMG rounds, the Lock-N-Load 50 BMG Press features single stage operation, extra long clearance, Lock-N-Load technology and enough mechanical advantage to get the job done right - every time. The ram accepts Lock-N-Load Bushings. The kit includes the 50 BMG Press, 50 BMG Dies and shellholder.

Includes: .50 BMG 2 die set
Ram Stroke: 4-1/2"
Priming Feature: Ram Prime system included

These cases are specially modified to work with Lock-N-Load Precision gauges. A special fine thread is used to attach them to the gauges, ensuring that they remain perfectly square for precise alignment in the chamber of your firearm. Second, the neck of the case is made perfectly round and opened slightly to allow a standard diameter bullet to slip into the case mouth effortlessly, but concentrically, to ensure the most precise results possible.

This replacement seating stem is the perfect addition for the reloader utilizing specialty Hornady bullets like the popular FTX bullet or the supper accurate A-Max bullet. Just take out the seating stem that was installed in the Custom Grade New Dimension Seating Die and install this stem. These stems are designed for use with the caliber and bullet type listed in the description only. Additionally these stems will only work with Hornady Custom Grade New Dimension Seating Dies.