PSA 10.5" 5.56 NATO 1:7 Nitride MOE Pistol Kit - 7790571

More Views

PSA 10.5" 5.56 NATO 1:7 Nitride MOE Pistol Kit - 7790571

In stock

Regular Price: $ 499.99

Special Price $ 399.99

Quick Overview

It is the customer's responsibility to be aware of all applicable laws and regulations regarding the purchase and ownership of uppers with a barrel length of less than 16". Federal NFA regulations are applicable to this item.

SKU: 7790571
UPC: 7790571
MFR#: 7790571

SKU: 7790571

UPC: 7790571

10.5" Barrel Length
Carbine Gas System
Nitride finish Barrel
5.56 NATO Chamber
1 in 7" Twist Rate
Magpul Carbine M-Lok Handguards
F-Marked Front Sight Post
A2 Flash Hider 
Forged Upper Receiver
T-Marks
Magpul Pistol lower build kit. 

Add To:

Barrel: 10.5" Nitride finished 4150V chrome-moly vanadium barrel. Chambered in 5.56 NATO, with a 1:7 twist, M4 barrel extension, and a carbine-length gas system. Barrel is is finished off with a MOE M-Lok carbine-length handguard, F-Marked gas sight base, and A2 flash hider.

Upper: Forged 7075-T6 A3 AR upper is made to MIL-SPECS and hard coat anodized black for durability. Featuring machined T marks, and a mil-spec finish. These uppers are made for us right here in the USA by a mil-spec manufacturer.

Lower Build Kit:  PSA MOE Black Pistol lower build kit with 7075 pistol tube. double loop latch plate, and classic fire control group.

SKU: 7790571
SKU 7790571
Brand Palmetto State Armory
Daily Deal N/A
Daily Deal Expires N/A
Youtube Video N/A
Free Shipping? N/A
SKU: 7790571

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Reviews

4.7 / 5.0
6 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
4
2
0
0
0
Looking good!
The PSA web site didn't say if it came with the BCG and I am here to say..Yes it does and I think it is the nicer bolt that they sell. It also didn't say it came with the charging handle and it did come with a mil-spec looking charge handle.
I haven't shot it a lot and I am not sure how actuate it is yet..but I will say this is nice and functioned or cycled flawlessly with several different mags and different ammo including a little bit of the cheap steel case stuff.
This is a very nice complete kit and went on my Anderson stripped lower flawlessly!
My shipping was very fast! Thanks for the great pistol.
I will say that if you live in a state that requires you to take a fired case into your local law enforcement that this didn't come with any empty brass like other upper I have bought. Lucky for me i do not live in one of those states or cities.
March 28, 2017
Loving it!
The PSA web site didn't say if it came with the BCG and I am here to say..Yes it does and I think it is the nicer bolt that they sell. It also didn't say it came with the charging handle and it did come with a mil-spec looking charge handle.
I haven't shot it a lot and I am not sure how actuate it is yet..but I will say this is nice and functioned or cycled flawlessly with several different mags and different ammo including a little bit of the cheap steel case stuff.
This is a very nice complete kit and went on my Anderson stripped lower flawlessly!
My shipping was very fast! Thanks for the great pistol.
I will say that if you live in a state that requires you to take a fired case into your local law enforcement that this didn't come with any empty brass like other upper I have bought. Lucky for me i do not live in one of those states or cities.
March 28, 2017
Another great product from PSA
I ordered this kit on Oct 12 and received it on Oct 18 with a weekend in between. Pretty awesome shipping time.

The kit looks great and assembled with ease on an Aero lower. I was pleased to see that the bcg was PSA marked with crossed cannons.

The only ding I would give if any is probably just me being picky. The last two PSA kits I have assembled came with shiny black springs in the lower parts kit. Just not the normal brassy tone ones that used to be in the kits.

All in all...I have a sweet pistol that should outlast me for $465.

Thanks again!
October 19, 2016
Amazing performance for the money.
Purchased for my first pistol build. Shipping was quick and kit was packaged nicely. Paired with an Anderson lower receiver the finish of the PSA upper matched beautifully. The kit went together without any issues and sighted in within minutes. From the first round I have experienced zero failures of any kind. With a take off surplus carry handle / rear sight the rifle was accurate enough for plinking at 50 feet. I can't speak to MOA as I haven't sighted in from a rest but accuracy was as expected for a shake down run. We used brass cased .223 fired from Magpul 30 round mags for break-in.
July 12, 2016
Great fit great price
All parts fit together well and function perfectly. After assembling I checked the headspace before test firing the pistol and saw no problems. All parts worked flawlessly even though the action was a little coarse and stiff- no problem it'll get broken in quick enough.
The finish on all parts was nice although the bolt had some rough edges; again that will smooth out with use.
The pistol buffer tube color and finish was slightly off color compared to the rest of the gun (to be expected as it is not treated with the same coating) but it still matched well enough and will be covered with a foam pad or brace any way.
I am very pleased with the cost of the kit and with the lower I mated it to the end price point was just under $500.
I ordered a spare bcg set (complete) and a spare firing pin for another gun. All shipping was really fast.

I have referred several friends to this company without hesitation.
June 23, 2016
I think I got blemed
Just recieved my pistol kit. Put it together and the buffer tube is purple. The upper receiver is half flat black and half shiny black. It really looks like these are blem parts. It looks horrible .
I wish there was away to post pictures

Comment by PSA:

From your description your upper has only been partially wiped down with CLP.

Dry the anodized finish will be very dull. When treated with clp or other oil it will take up a more satin appearance.

Try wiping down the upper with CLP and then wiping it dry this will protect the finish and give a uniform appearance. Conversely degreasing the shiny portions will give an all flat appearance however we do not recommend this.

Mil-spec anodizing can vary from grey to a reddish purple. This is normal but contact customer service directly if this is an issue for you.
June 8, 2016

Customers Who Viewed This Item Also Viewed