PSA 16" Mid-length 5.56 NATO 1:7 Nitride 13.5" Keymod Classic Freedom Rifle Kit - 77932847

More Views

PSA 16" Mid-length 5.56 NATO 1:7 Nitride 13.5" Keymod Classic Freedom Rifle Kit - 77932847


Quick Overview

SKU: 77932847
MFR#: 77932847

Barrel Length: 16" 
Gas System: Mid-length
Barrel Profile: A2 Style
Barrel Steel: 4150V Chrome Moly
Barrel Finish: Nitride
Chrome Lining: No
Muzzle Thread: 1/2-28
Chamber: 5.56 NATO
Twist Rate: 1 in 7"
Barrel Extension: M4
Diameter at Gas Block: .750" 
Gas Block Type: Low-profile
Muzzle Device: A2 Flash Hider
Receiver Material: Forged 7075 T6
Receiver Type: M4
Hand guard Type: PSA 13.5" Keymod Free Float
Bolt Carrier Group Included: Yes
Bolt Steel: Carpenter 158
Bolt Carrier Profile: Full-auto
Charging Handle included: Yes
Overall Length: 24.5"

Add To:

Barrel: 4150V Chrome moly steel, chambered in 5.56 NATO, with a 1/7 twist, M4 barrel extension, nitride treated, and a mid-length gas system. Barrel is finished off with a .750" diameter low-profile gas block, PSA 13.5" Keymod free float rail, and A2 flash hider.

Upper: Forged 7075-T6 A3 AR upper is hard coat anodized black for durability. Featuring M4 feedramp cuts, these upper receivers are made for us right here in the USA.

Bolt Carrier Group: For AR15 and M16 rifles and carbines. Bolt is made of shot-peened, Mil-spec Carpenter 158® steel. Gas key is secured with grade 8 fasteners and staked. Bolt carrier is parkerized outside and chrome lined inside. Includes Charging Handle.

Lower Build Kit: Includes the PSA Classic Freedom Lower Build Kit

SKU: 77932847
SKU 77932847
Brand Palmetto State Armory
Daily Deal N/A
Daily Deal Expires N/A
Youtube Video N/A
Free Shipping? N/A
SKU: 77932847

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!


4.8 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
Fantastic value
Shoots .75 moa with some boring handloads. I bet I could get it down to .5 moa if I were to tune the loads a bit. For the price of this kit you can't even ask for even 1 moa let alone half to three quarter moa. The trigger bolt catch wore out quick to where it started double firing then eventually full auto so that needs replaced quick. But I digress with such a good price tag.
April 10, 2017
Worth more than the price
I bought this to serve as a cheap longer range ar15. Picked up an Anderson lower and a Bushnell 3-9x scope. The lower build kit appears to be all mil spec and the bolt is not mpi or hpt tested. It appears to be a slick black coating perhaps nitride coated as well. The upper fits like a glove with the Anderson lower with no noticeable movement between the two when handling the rifle. Inspecting the upper assembly there are no noticeable tooling marks and only very light wear marks on the very front of the handguard which appears to have come from assembling it.

When I initially went to the range with my new build it did not perform up to my expectations at first. I fed 50 rounds of American Eagle brass 5.56 flawlessly then steel cased tula. Every round of the steel cased failed to either eject or feed properly. Never once was I able to get off two rounds in a row. This happened for about 30 rounds. I went back cleaned the rifle spotless again and then fed 100 rounds of tula flawlessly with no malfunctions or misfires shooting nice groups at 200 and 250 yards. Every time since then steel has no problem feeding and for the cost of ammunition and the rifle it is definitely worth every penny.
March 22, 2017
Quality build
I ordered this rifle kit on a Saturday evening and received it on the following Wednesday. All components looked really nice and everything was complete. I put this kit on a Spikes tactical crusader lower and the upper locked up really tight with the lower fit and finish was impressive for such a good price! I haven't got a chance to shoot it yet so I'll try to remember to update this review once I get to the range. So far I'm very pleased with Palmetto State Armory and the freedom rifle kit.
February 9, 2017
Went together well but can't shoot it yet.
After assembling the lower I discovered that the charging handle was broken. PSA said they'd replace it but I have to send in the broken one first delaying shooting for another week or so.

This is the third kit I've received from PSA. The first 2 were great. I think whoever packaged this one knew the charging handle was broken because there was a zip tie holding the BCG in place which was not the case in the first 2 kits I assembled. Somewhat disappointing for a company that has so far been great to work with and has such good reviews.
November 16, 2016

Customers Who Viewed This Item Also Viewed