PSA 16" 9mm Upper With BCG and Charging Handle - 503648

More Views

PSA 16" 9mm Upper With BCG and Charging Handle - 503648

TEMPORARILY OUT OF STOCK

Quick Overview

SKU: 503648
UPC: 503648
MFR#: 503648

Barrel: 16" chrome moly steel barrel.  Chambered in 9mm, (9x19), with a 1/10 twist.   The Mid profile Barrel is melonite treated for durability and finished off with an .750" diameter F-marked front sight base with sling swivel, standard handguards and a 1/2-36 thread birdcage-syle flash hider.

Upper: Forged 7075-T6 A3 AR upper is hard coat anodized black for durability. Featuring T-marks, these upper upper receivers are made for us right here in the USA.

Bolt Carrier Group: For 9mm AR15.  8620 Bolt is NOT ramped, and phosphate coated.  Includes Charging Handle.

 

Add To:

Barrel: 16" chrome moly steel barrel.  Chambered in 9mm, (9x19), with a 1/10 twist.   The Mid profile Barrel is melonite treated for durability and finished off with an .750" diameter F-marked front sight base with sling swivel, standard handguards and a 1/2-36 thread birdcage-syle flash hider.

Upper: Forged 7075-T6 A3 AR upper is hard coat anodized black for durability. Featuring T-marks, these upper upper receivers are made for us right here in the USA.

Bolt Carrier Group: For 9mm AR15.  8620 Bolt is NOT ramped, and phosphate coated.  Includes Charging Handle.

 

Each upper is assembled to order, and test fired to check gas function.

Signature required on delivery.

SKU: 503648
SKU 503648
Brand Palmetto State Armory
Daily Deal N/A
Daily Deal Expires N/A
Youtube Video N/A
Free Shipping? N/A
SKU: 503648

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Reviews

4.4 / 5.0
7 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
3
4
0
0
0
Runs great
Pinned to PSA converted 9mm carbine lower. Chamber might have been a little tight. A handful of factory rounds failed to completely chamber. Put a bore brush on a low speed drill and buffed up the chamber a little and have had no further issues. I have only fired it indoors at around 50 ft but with a cheap Bushnell Trs25 red dot it punches out the center of the target. About 400 rounds of 124gr FMJ through it so far with no malfunctions (see review of 9mm mag block). I would recommend to a friend.
November 26, 2015
Do it right
Get a 9mm carbine buffer do not add quarters or buffer filler material. I added quarters to increase spring tension and ended up chipping my bolt face. Do it right with a correct hammer and buffer that weighs 5oz or more.
September 11, 2015
Worth the money
I put this on a PSA lower fit is tight. I've put 300 rds through it without any failures using PSA mags. Mags worked fine with no modification. Sighted in at 25 yards had hits touching each-other. Shot at 100 yards with 4" groups open sights shooting on sandbags. Just wish it had a dustcover.
August 7, 2015
Excellent!
The upper arrived within about 10 days of placing the order. It looked to be nicely put together and my only complaint is I have to remove the front sight to fit my MWI Free Floater forearm. Not really a problem with the upper. For the money you could not do better.
This is my second 9mm AR. I have had an Olyarms based model for years but it uses STEN mags. I wanted a rifle that would share the mags my 9mm Tavor uses. So far everything appears to be working well. I put the upper on a 20+ year old Bushmaster lower I had spare and it runs like a champ! The Olyarms model is now up for sale!!!
5 stars all round.
July 6, 2015
Works well.
I got this one as a Christmas present to myself. Put it on a New Frontier polymer lower fit fine no troubles except I found that the bolt was not ramped no biggie. I did have to trim a little off the hammer to make it work(thank god for polymer. I should have gotten the kit as I did not have the mag block on hand and had to purchase it separately. Also I had to get the 9mm buffer separately. Now that I have it all together and @ 1000 rds. thru it I wonder why I didn't do it sooner. Eats anything I put thru it and loves the 147 gr. with a slidefire. Thanks PSA for a great product I just wish your customer service was a bit more accessible This is why I only give you 4 stars. Thank you all again and look forward to buying from you again.
June 1, 2015
Very nice.
Nice right out of the box. Had to slightly modify all of the mags by removing very small portion from the top of the mag slot but once that was done works perfectly.
May 28, 2015
Works for me
Ok this not the first product from PSA that I have ( the 300 ACC upper is great ) I put this on a lower that is 20 odd years old no problem installed the insert ( more instructions on this would be a great help}. The mag would not latch after some checking it I needed to remove about .045 + - from the top of the mag lock slot in the mag. OK I should have sent them back ( as I ordered two and neither would lock in place ). That being said I took the weapon out and fired 100 pluss roundsworked great cheap read dot ( bore sighted with lazer type thing) and a target at 75 yards off hand all in the Black. These rounds are the same rounds that I use in my Sig pistolhowever the rounds out of PSA had a lot more soot or whatever that is on the out side of the cases.
May 23, 2015

Customers Who Viewed This Item Also Viewed