PSA Gen2 PA10 20" Rifle Length .308 WIN 1/10 Stainless Steel 15" M-lok Upper - with BCG and CH - 5165447981

More Views

PSA Gen2 PA10 20" Rifle Length .308 WIN 1/10 Stainless Steel 15" M-lok Upper - with BCG and CH - 5165447981

In stock

Regular Price: $ 719.99

Special Price $ 499.99

Quick Overview

SKU: 5165447981
UPC: 5165447981
MFR#: 5165447981

Barrel Length: 20"
Gas System: Rifle-length
Barrel Profile: A2 Style
Barrel Steel: 416R Stainless Steel
Barrel Finish: Stainless
Chrome Lining: None
Muzzle Thread: 5/8-24
Chamber: 308 WIN
Twist Rate: 1:10
Barrel Extension: M4-style
Diameter at Gas Block: .750
Gas Block Type: Low-profile gas block
Muzzle Device: A2 Style Flash Hider
Receiver Material: Forged 7075 T6
Receiver Type: PA10
Handguard Type: PSA 15" M-Lok Free Float Rail 
Bolt Carrier Group Included: Yes
Charging Handle Included: Yes

Add To:

New and improved Palmetto State Armory PA10 Gen2 308 Upper is fully assembled and ready for your complete PA10 Gen2 Lower!

With streamlined styling and improved function, the new and improved PSA PA10 is here.  The Gen2 model offers an enhanced chamber and extraction, with a more modern appearance.  

Barrel: 416R Stainless Steel, chambered in 308 WIN with a 1/10 twist, rifle-length gas. Upper is paired with a Palmetto State Armory 15" M-Lok free-float rail, low profile gas block, and an A2-style muzzle device. 

Upper:  Precision machined from forged 7075-T6 aluminum, then Black anodize hardcoated to MIL-8625 Type 3 class 2.   

Bolt Carrier Group: 9310 steel bolt assembly, nitride treated for durability.  8620 carrier, nitride treated, with a nitride treated gas key properly staked with grade 8 fasteners.  Charging handle is also included.

The Gen2 PA10 receivers are functionally compatible with the Gen1 upper receivers, however we recommend matching Gen2 lowers to Gen2 uppers for best appearance.  There are external cosmetic differences when mixing Gen1 and Gen2 upper and lower receivers that some may not find appealing.  Gen1 lowers will be available in the future for those who want a cosmetic match. 

The AR10 platform does not enjoy a common design between manufacturers, like the AR15. As a result, there can and will be subtle differences in the parts kits of various manufacturers. Some parts, like the fire control group, are shared with the AR15 platform to preserve the options for upgrading. For best results, we recommend only using PSA PA10 parts with our uppers and lower receivers. We do not recommend using other manufacturers parts in our products.

SKU: 5165447981
SKU 5165447981
Brand Palmetto State Armory
Daily Deal No
Daily Deal Expires No
Youtube Video No
Free Shipping? No
SKU: 5165447981

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 5 questions Browse 5 questions and 4 answers
I would like to put an adjustable gas block on mine. What ones will fit? Thx!
Mike R on Apr 16, 2018
BEST ANSWER: I would think any low profile for a 0.75" diameter barrel would do the trick. I looked at putting one of mine on but frankly I did not need it. It appears the low profile one I have would have been a perfect fit.
Will this fit a dpms lower?
Jason F on Apr 25, 2018
BEST ANSWER: will this upper fit a dpms lower
Is this compatible with 7.62x51 Nato?
Ron L on Apr 25, 2018
BEST ANSWER: Yes
!.: Am I able to just simply connect this assembly to a PSA Gen2 lower receiver without any other parts? Does it come with the 2 hinge pins?
Larry W on Apr 13, 2018
BEST ANSWER: Yes, and yes.
Will this fit a Bushmaster LR10 lower?
Greg G on Apr 30, 2018

Reviews

4.4 / 5.0
14 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
9
2
2
1
0
Satisfied customer!
Fit and finish perfect, over 200 rounds and not a single malfunction. Extremely happy with sub 1 inch groups @ 100 yds.
June 18, 2018
Purchased
2 months ago
Muzzle device
After 20 rounds, the muzzle device fell off. Not worried about it, as I will be adding a custom device, but did not expect a manufacturer installed piece to be so loose. Also, there is a high amount of carbon building up at the front side of the gas block, both around the front where it meets the barrel and where the gas tube in exposed. It has not had more than 80 rounds through it yet, so this is a cosmetic issue, but something that should not have to be worried about after a first use.
June 6, 2018
Purchased
1 month ago
Response from Palmetto State Armory
We do apologize for that. Since all of our parts and firearms are covered by our Unlimited Lifetime Warranty, if you have any issues arise from the craftsmanship of the product, we can either have select parts sent to you for you to replace, or we can have the item brought in, at no cost to you, so we can repair or replace the defective product. Please contact Customer Service so we may resolve this issue.
June 7, 2018
Casey S
It is a good rifle but they do need to tighten the rail screws.
I love this upper. But when i took it to the range for the first time the rail came off of the upper. When i did a check of the rail i found that the rail screws were not tightened. i put the rail back on and it worked fine.
User submitted image
Added Jun 2, 2018
June 2, 2018
Purchased
1 month ago
Love it, and I bet you will too
Okay fit and finish were exceptional. Perfect match to the PSA Gen 2 Lower. The two of the together are tack drivers from way back, shot after shot, sub MOA.
June 2, 2018
Purchased
1 month ago
Losing faith in quality.
upper is on its way back for correctional repair. FORWARD assist stick out with spring visible. Interior finish in uneven as well as rough machining. Handguard has dents before coating was applied. Sits a bit loose on PA10 Gen 2 lower.
May 22, 2018
Purchased
2 months ago
Response from Palmetto State Armory
We do apologize for that. Since all of our parts and firearms are covered by our Unlimited Lifetime Warranty, if you have any issues arise from the craftsmanship of the product, we can either have select parts sent to you for you to replace, or we can have the item brought in, at no cost to you, so we can repair or replace the defective product. Please contact Customer Service so we may resolve this issue.
May 23, 2018
Casey S
Best purchase so far from PSA. Keep up the good work PSA
Very happy with my latest from PSA. 20 inch complete 308 upper on the tenth anniversary edition
Very happy with my latest from PSA. 20 inch complete 308 upper on the tenth anniversary edition
May 21, 2018
Purchased
2 months ago
Looks to be a solid, well made upper!
May 20, 2018
Purchased
2 months ago
Great Upper and fits perfectly to PSA Lower
I purchased this complete upper and the lower at a great price and free shipping. I did replace the standard birdcage to a VG6 Epsilon which really helps with the recoil. I highly recommend the 20 inch barrel as it comes with a barrel length gas system. I purchased an adjustable low profile gas block but I found I did not need it with the rifle length system.
May 14, 2018
PSA is on it all the way! Fast customer service and fast shipping! Product is a top notch piece of hardware. I only gave it 4 stars because I’ve yet to take it to the range. As with all of my other PSA purchases, I’m sure it’ll run flawlessly. It should be 4.999 Stars.
May 12, 2018
Purchased
2 months ago
The upper is great however the PSA lower rail is thinner than a standard rail causing no attachments to fit properly. Looking for a fix
Still needs an optic but it's coming along very well
Still needs an optic but it's coming along very well
May 10, 2018
Purchased
2 months ago
Response from Palmetto State Armory
We do apologize for that. Since all of our parts and firearms are covered by our Unlimited Lifetime Warranty, if you have any issues arise from the craftsmanship of the product, we can either have select parts sent to you for you to replace, or we can have the item brought in, at no cost to you, so we can repair or replace the defective product. Please contact Customer Service so we may resolve this issue.
May 11, 2018
Casey S

Customers Who Viewed This Item Also Viewed