New AK-47 Magazine 7.62x39 Steel (30rd)-AK4730STL

Pretty good magazines. Work alright.

Mag won't lock in. When forced it will but bolt gets stuck on mag

I bought 5 of these magazines for my RAS 47 from Century Arms. The fit and finish on the magazines were incredible. Each magazine came sealed in a plastic with oil coating the whole mag. The magazines worked flawlessly and each mag did hold the bolt open on the last round. Couldn't be happier with these magazines. Will be buying more soon.

Bought two of these as the price is great. The build quality appears to be top notch however I was unable to get them to lock into my psak47 g2. I'll be looking at it closer today when I have time to field strip the rifle but wanted to mention these locked into my buddies' century arms and Arsenal AK's. Great product just doesn't work in my psak47 g2

Individually bagged and oiled for long term storage. Palmetto sales on these are great.

Fit fine on one rifle but would not seat in another. The ramp at the rear locking lug of the magazine may be too thick and interfere with the receiver rivet in front of the hammer in some AKs. You can see the interference if you look at the mag well from above. All that is needed is a few passes with a flat file to remove a few thousands of an inch. Don't take off more than you have too.

I bought a case of 42 "blemished" Croation mags. Out of 28 unwrapped inspected and tested I only found actual flaws on three of them. Two had scrapes on the spines and one had very light rust that wiped away easily.

All locked into my WASR 10 and a friends Chinese Polytech with little to no wobble and functioned 100% reliably.

I was a little apprehensive about ordering these due to the fitment issues I'd read about online but I figured a few minutes with a belt sander could fix that easily.

As it turned out all I had to do was wipe off a little excess oil and load 'em up.

I would definitely recommend these mags.

Bought 20 of these in the blemish configuration. They fit in my Npap like a dream so needless to say I'm ecstatic. Thanks PSA

I JUST RECEIVED THE 6 (BLEMISHED) MAGS FIT GREAT IN MY N-PAP AK. THE MAGS LOOK GREAT ALSO DESCRIPTION SAID BLEMISHED BUT I COULD NOT SEE ANY BLEMISHES LOOKED BRAND NEW TO ME. I WOULD DEFINITELY BUY AGAIN AT 6.99 THEY ARE CHEAPER THAN POLYMER MAGS (TAPCOPMAG ETC) AND BETTER BUILT. THE PACKAGING WAS GREAT AND PROMPT SHIPPING THUMBS UP WAY UP.

With the elections over now magazines and such are going down in price where legal. These are really good magazines at a good price but now you can start finding better ones for very close in price. Are they worth it? For now they are. They do need a little fitting in some AKs. Solid magazines!

The mags fit EXTREMELY tight in my NPAP to tight to be used. They do not fit in my buddies M70AB at all.
My Creative Arms ARK loves them as to a couple Romanian/Polish builds we have tried and the bolt hold open is great. Sucks that they don't fit in Yugo pattern guns... which is who first made the BHO followers.

These magazines are made to the same specs as the Yugo BHO mags. They work flawlessly in Yugo variants as expected. My Russian mags wobble around in my Opap but it doesn't mean they're not quality mags. see what I'm saying?

These weigh 2g less then the Yugo's I have and the QC is a bit better in my opinion.

You'll probably have to file the lug a bit for WASR's. I can't give any reviews as to how they'll fit American made AK's but given what I read there's bigger issues than mag fitment.

With the Blem's on sale for $6.99 you can't go wrong...

Shipped quicker than I expected and arrived well packaged. Fitment for the RAS47 is picture perfect- snug lockup and little to no wobble. I couldn't be happier!

Insanely tight in my Arsenal but after fitting they work ok.

These are better than Korean mags but surplus mags are a better value.

Great mags for the price. No wobble and work fine in my m92 pistol.

Fit fine in all my aks were a little tight in my yugo pistol but they did fit excellent quality would buy again

I bought 8 of these and have fitment issues on all but one ak. The galil ace will take them but you've really got to focus on hitting that sweet spot to get it to latch. My m92 pap is extremely broken in and takes them with no struggle. My newer N-Pap doesn't like these mags at all as it is extremely tight .

Bought 20. Lock up and feed great in my Arsenal and MAK 90. People who say they have problems with them locking up in their RAS47s - well RASs are garbage. Yes all AKs are different but don't judge a Croatian BOH mag on someone bad choice in an AK. For the price these are awesome and they are not the thin Steel of the Korean mags. Great buy.

Price is ok. But for the same price you can find Magpuls around which are less of a headache. These magazines would not lock into either of my PSAK-47 (gen2) rifles. I had to grind them down with power tools. After that they work reliably in those guns. The KS-47 is a different story. These magazines seat in it very easily but the bolt carrier drags on the feed lips. I tried filing one of the mags down a bit there and now the bolt carrier will start to strip a round off and then the round tilts too sharply and the back of the bullet ends up under the bolt carrier.

100% FTF in the KS-47 with these magazines. I have 6 of them and they're all the same. Save yourself the headache and get something else.

Went ahead and ordered 10 for free s/h. Fits puuurrrrrrfect in my RAS47 and is a little wobbly in my CMMG AKS8 which grinds on the lug of Tapco magazines for a Very tight fit comparatively. Bolt H/O works on both rifles as well. It's got 9 spot welds on the back seam reinforced feed lips packed very oily. I'm happy I got these solid GTW mags.

I ordered ten of these mags. I am not very impressed with the quality. Two of the mags had the floor plates come off during shipping. Out of the ten mags only two were tight at the floor plate to the body. When they made these mags they stamped the bodies to hard and bent most of them causing the floor plates to be a very loose fit. I had to remove most the floor plated and expand the body at the floor plate area. The metal is soft there too and bends easily.So in my opinion don't trust your life to these mags.

Purchased 4 of these magazines. The quality is what you would expect from an all steel mag these things are built to last. However ALL 4 of them did not fit either of my AK's (WASR-10 Interarms AKM47-SA). The feed lips and rear locking tabs were all too thick and needed considerable filing. That being said these magazines are pretty nice and once they fit they work. And the BHO follower is always a plus.But if you don't feel like putting a little elbow grease into these mags then I'd suggest sticking to surplus steel.

I bought four of these magazine....I have to file the rear locking lugs to fit....Other than that it works flawlessly on my parts kit built AK....Romanian and Hungarian Ak.....

They look good and function fine in my PSAK47 WASR and Zastava. I just ordered another 10 - With free shipping ya can't beat the price

Solid steel mag but a figment could be an issue. Fit my O-PAP great but would not fit in my two WASR. I would suggest buying only 1-2 first to check fitment before buying in bulk

I was looking forward to using these steel magazines for a more authentic feel for my PSAK47. However much to my dismay none of the six that I ordered were able to lock into the magazine well properly. When I rocked them in they did not engage the magazine locking lever at all. However they stuck in when I gave the magazine a good smack but then the magazines ended up seating so high up that it prevented the bolt from going forward and would just run into the magazine.

So I unfortunately have to rate these magazines with 1 star in all three categories; since price and value are not commensurate with the product you are getting since the product is entirely incompatible with the Palmetto State Armory built AK47 which is highly unfortunate.

These required minor fitment (filing of rear lug) to fit both my slr107fr and O-pap. Mags don't have any side to side movement in either rifle. These have the bho follower which I'm not a big fan of. Once fitted they work 100%.

Ordered one mag to test. Had issues with FTFs on my WASR. Would not fit my C39v2. With combloc surplus mags at the same price I wouldn't bother with these.

Purchased 5 of these mags. Using two makes of AKs had 1 mag locked up properly in both weapons 2 locked into 1 weapon and not the other and the last two would not lock in either. Not worth the money.

Bought five of these Croatian mags in a bundle with 5 MagPul mags. The Croations lock up great in a RAS47 by Century Arms and in a Norinco SKS Sporter that takes AK mags. They don't lock up in an O-PAP AK47. The MagPuls don't work in the O-PAP either. If another sale comes along I'll grab more Croations and leave the plastic crap for someone else.

Using with my Hungarian AK63D from century arms. Was not too impressed first couple rounds would not feed. This happened consistently. Very tight fit. Need to almost force this mag into the rifle. Once the magazine was seated properly and a couple attempts at the loading the first round in it function fine afterwards. Very heavy duty good quality magazine with a nice bolt hold open feature just doesn't play well with my AK63D. Will not be buying more of them for myself. Would suggest them for AKs that actually work with them though.

Ordered 10 of these just my luck that they do not lock into place in a PSAK-47 GB2 the magazine seems to be well built wish I was able to use them. The magazine fits perfectly but just won't lock the trash Magpul magazine that came with the PSAK locks just fine I should have purchased a quality AK instead of the PSAK

Looks to be good quality fits my WASR just fine but will not fit into my milled underfolder.

I have used Croatian magazines in the past with my Arsenal SAM7 AK variants and had great success. I have heard from some people that told of the mags having "too tight a fit". Since those reviewers on other websites were primarily using Century Arms AK variants and some even using the dreaded I.O. AK variants I would suspect that their problem related to a poor magwell opening cut out and were not caused by any problem that was magazine related. The ones I used were very well built as is typically found in European made steel magazines and like other such all steel mags can generally be counted on for years of reliable service. The AK47 is anything but "magazine finicky" but you do have to start with a decently built rifle.