BLEM PSA 4" 9mm 1:10 M-Lok MOE Shockwave Pistol, Flat Dark Earth

More Views

BLEM PSA 4" 9mm 1:10 M-Lok MOE Shockwave Pistol, Flat Dark Earth

In stock

Regular Price: $ 729.99

Special Price $ 549.99

Quick Overview

free shipping Free Shipping applies to this item only and not the entire order.

Must be 21 or older to purchase.

If you live in California, please read this notice before ordering.

It is the customer's responsibility to be aware of all applicable laws and regulations regarding the purchase and ownership of uppers with a barrel length of less than 16". Federal NFA regulations are applicable to this item.

WARNING: This product can expose you to the chemical lead, which is known to the State of California to cause cancer and reproductive harm. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

SKU: 5165447549
UPC: 5165447549
MFR#: 5165447549
  • Barrel Length: 4"
  • Gas System: Blowback
  • Barrel Profile: Heavy
  • Barrel Steel: 4150V Chrome Moly Steel
  • Barrel Finish: Nitride
  • Chrome Lining: None
  • Muzzle Thread: 1/2-36
  • Chamber: 9mm (9x19)
  • Twist Rate: 1 in 10"
  • Barrel Extension: Blowback
  • Diameter at Gas Block: N/A
  • Gas Block Type: N/A
  • Muzzle Device: PSA Fluted 9mm Flash Can
  • Receiver Material: Forged 7075 T6
  • Receiver Type: M4
  • Handguard Type: PSA 6" LIghtweight M-Lok 
  • Bolt Carrier Group Included: Yes
  • Bolt Steel: 8620
  • Bolt Carrier Profile: 9mm Hybrid
  • Charging Handle Included: Yes
  • Lower Receiver: Forged 7075 T6 Aluminum
  • Receiver Finish: Hardcoat Anodized
  • Fire Control Group: Single-Stage, Mil-spec style
  • Grip: Magpul, Flat Dark Earth
  • Buffer Tube: 7075 T6 Aluminum 
  • Adjustment: Fixed
  • Pistol Brace: KAK Industries Pistol Stabilizing Blade, Flat Dark Earth
  • Magazine: ETS Clear Magazine, 31 Round

Add To:

Barrel: 4" chrome moly steel barrel. Chambered in 9mm, (9x19), with a 1/10 twist. The barrel is nitride treated for durability and finished off with a Palmetto State Armory 6" Lightwieght M-Lok free-float rail and a Palmetto State Armory Fluted 9mm Flash Can.

Flash Can: Palmetto State Armory's Fluted "FLASH CAN". This is a solid 6061 aluminum device that is designed to direct muzzle gases and the muzzle flash forward. Threaded 1/2-36 for 9mm.  Black military-style hard anodizing.   THIS DEVICE IS NOT DESIGNED TO REDUCE RECOIL, MUZZLE RISE, OR FLASH SIGNATURE. This device is designed to direct gasses and noise forward away from the shooter and enhance the weapon's appearance.

Upper: Forged 7075-T6 A3 AR upper is hard coat anodized black for durability.  These upper receivers are made for us right here in the USA.

Bolt Carrier Group: G-9 Hybrid 9mm BCG. Phosphate coated, 8620 steel, G-9 Hybrid Bolt allows use with either Glock®-style, or Colt®-style magazine, Palmetto State Armory lowers. Includes charging handle.

Lower:. Forged 7075 T6 aluminum and then hard coat anodized, these lowers are purpose built to accept 9mm Glock®-style magazines.   Designed to work with PSA's new 9mm Hybrid uppers.  The lower is assembled with a Palmetto State Armory MOE FDE lower build kit with a Magpul FDE Grip,   KAK Industrieds Shockwave pistol buffer tube, and KAK Industries Pistol Stabilizing Blade.  Does not include last round bolt hold open feature.

SKU: 5165447549
SKU 5165447549
Brand Palmetto State Armory
Daily Deal No
Daily Deal Expires No
Youtube Video No
Free Shipping? Yes
SKU: 5165447549

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 13 questions Browse 13 questions and 39 answers
What is the overall length?
Kevin on Jun 14, 2018
Does this particular pistol have a last round bolt hold open feature?
Kevin on Jun 14, 2018
BEST ANSWER: No
What must one do/get to fit a 1/2x28 threaded can on it? Adapter?
Jeremy N on Jun 18, 2018
BEST ANSWER: An adapter might be best. A lot of after market barrels come with the standard 1/2x28 thread though.
does this gun require a SBR stamp?
beanerdee1! on Jun 29, 2018
BEST ANSWER: I am fairly sure it does not, as it is technically a pistol. Just make sure that you don't put any feature on the pistol that will redesign the pistol into a SBR
Can you remove the rear weight from the bolt carrier group (punch out roll pin) to install a Law Tactical folding adapter? Thanks!
Stephen S on Jun 21, 2018
BEST ANSWER: Not with the provided bolt, I bought a different bolt and was able to do this though.
which glock magazines fit this gun?
soconyjoe on Jun 12, 2018
BEST ANSWER: Glock 19 and Glock 17 mags work for sure. I have not tried Glock 26 which are quite short. The ETS 33 round clear mags work well also.
What type of “blem” can I expect?
SharpKnife on Jun 12, 2018
BEST ANSWER: I had to look to find the blemish... on mine it was an "oddity" in the lower about a centimeter in diameter that's hidden when the upper is in place. I'm sure each one is different, but I was happy with mine.
Can you fit a silencerco hybrid suppressor under the handgaurd? It appears the threads are behind the front of the handguard.
Micah A on Aug 19, 2018
BEST ANSWER: I live in the draconian state of illinois and cannot purchase or possess a suppressor so I cannot help with this question with first hand knowledge. Looking at my pistol I and inclined to say that you would not be able to fit the suppressor into the muzzle with the standard handguard attached.
How well will this work supressed?
Ryan T on Aug 18, 2018
BEST ANSWER: The barrel in fluted within inside of the hand guard. Don’t think a suppressorwould fit with the length of barrel. Go with a longer barrel that extends past the hand guard
What kind of accuracy are you seeing out of it?
J.R. F on Jul 17, 2018
BEST ANSWER: I have a Bushnell TRS-25 on mine, it makes pretty tight groups in the range I work in, 25 to 40 feet.
Does anyone using supresor on this pistol? Advice please... Thanks
Ibrahin D on Jul 17, 2018
BEST ANSWER: I've used one on mine. It works well but does extend the overall length. I'm not going to mount mine due to the way I want to use the pistol.
What buffer and spring are used in this combo?
William H on Apr 21, 2018
BEST ANSWER: KAK Shockwave Blade brace and buffer tube. Was so impressed with it on the PSA 9 mm pistol that I bought another set for an AR pistol build also.
Does this gun require the buffer tube to function or is it to hold the brace only?
Terry B on Jun 28, 2018
BEST ANSWER: Yes it does require the buffer tube.

Reviews

4.7 / 5.0
28 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
20
8
0
0
0
Very impressive quality
I am very impressed with the build quality of this little beast. The use of a Magpul grip and flashcan just make it even better. It points exceptionally well and is crying out for all manner of bolt on accessories from red dots to laser/light combos. It's a great plinker and home defense system.
Worried about buying a "blem" item? Don't; I had to search diligently to find what might be a blemish - a tiny mark the size of a small gnat's littlest toe.
Overall this - and PSA - gets 6 stars.
August 17, 2018
Psa 9mm 4.5 inch
Overall very happy with this weapon,would recommend
August 16, 2018
Purchased
1 month ago
Great gun!!
Great gun. I thought the short barrel would be inaccurate but its not!
August 12, 2018
Purchased
2 months ago
Great quality upper and lower receiver. I upgraded the handguard and installed an SB Tactical brace.
User submitted image
User submitted image
August 3, 2018
Purchased
1 month ago
If you are looking for a 9mm ar pistol, get this one
What a magnificent deal. Functions flawlessly, shoots straight, awesome price. Would be *PERFECT* IF it had a bolt catch. But considering, it's pretty hard to beat
August 1, 2018
Purchased
1 month ago
Fun
Recommend this. Lots of fun! Fast shipping no problems.
August 1, 2018
Purchased
1 month ago
Excellent!
If there is a blem it is small. 200 rounds and no malfunction. Haven't tried ETS mag. Glock magpul and Promag works great.
July 29, 2018
Purchased
1 month ago
Great gun that's nearly perfect - almost
Great quality weapon, solidly built, at a great price. It's extremely accurate. These pistol braces are a great alternative to paying the government to attach an actual stock to make an SBR.
But it could be improved: The Shockwave brace is a hard, narrow piece of plastic that hurts when the weapon is shoulder fired, and this gun kicks pretty hard for 9mm. The SB tactical SOB brace is a much better choice. The forward assist is literally useless, and doesn't need to be there.Lack of a last round hold open is annoying. Other AR-9's have it, why not this one ? Handguard looks good, but is unneccesary, as is the muzzle thingy. They just add weight.
PSA 9mm pistol with SB tactical SOB brace
PSA 9mm pistol with SB tactical SOB brace
July 28, 2018
Purchased
1 month ago
Inexpensive fun!
It shoots great, and much cheaper ammo which is nice!
Sweet piece!
Sweet piece!
July 25, 2018
Purchased
1 month ago
Absolutely the most fun gun I own!
This was exactly as described. A tiny little mark on the Picatinny rail. Doesn’t matter at all. Since this isn’t a beauty competition. This is just a cool gun to own and shoot. If you have ever wanted one, pick it up, don’t wait. About 300 rounds through it, no issues.
July 19, 2018
Purchased
2 months ago

Customers Who Viewed This Item Also Viewed