BLEM PSAK-47 GB2 Liberty Complete Barreled Receiver With Hammer Forged Carrier - 516445301B

More Views

BLEM PSAK-47 GB2 Liberty Complete Barreled Receiver With Hammer Forged Carrier - 516445301B


Quick Overview

WARNING: This product can expose you to the chemical lead, which is known to the State of California to cause cancer and reproductive harm. For more information go to (CA Health and Safety Code Section 25249.6).

SKU: 516445301B
UPC: 516445301B
MFR#: 516445301B
  • Barrel Length: 16”
  • Barrel Steel: 4150V Chrome Moly Vanadium
  • Barrel Finish: Nitride
  • Chamber: 7.62x39mm
  • Twist Rate: 1 in 10”
  • Trunnion: Billet Steel
  • Receiver Material: 1mm Thick Hardened Steel
  • Receiver Type: Stamped
  • Bolt Material: Billet Steel
  • Gas Tube: Included
  • Bolt Carrier: Hammer Forged Steel
  • Gas Piston: Included
  • Front & Rear Sight Assemblies: Included
  • Receiver Dust Cover: Included
  • Complete bolt: Included
  • Fire Control Group: NOT INCLUDED
  • Safety Lever: NOT INCLUDED
  • Grip, Stock, & Handguards: NOT INCLUDED


** These barreled receivers will have cosmetic blemishes that do not affect function. This may include, but is not limited to, forging marks under the finish, scratches, slight variation in the finish color coat.

Add To:

The PSAK-47 was designed from the ground up to be a new standard in AK rifles, utilizing all new precision manufactured parts.  We took the best of all the different models to create an American AK.  Thoroughly tested in development, we tortured tested to 10,000 rounds to ensure a quality product.  Not to be satisfied with just a good AK, we kept improving and now are proud to announce our PSAK-47 GB2 barreled receivers, for DIY builders, with a billet steel front trunnion, and bolt.  The 4150 barrel is nitride treated for accuracy and durability, and is pressed into a new Billet steel machined front trunnion to ensure the longevity AKs are known for.  The hardened steel 1mm receiver features a mil-spec style double hook trigger, and side rail mount.  The front trunnion is engraved with a star to designate the GB2 (Billet Block) model.  The forged carrier is engraved with an "L" to designate it as a Liberty Forged Carrier, in order to differentiate it from cast carriers.  The PSAK-47 GB2 Barreled Receiver includes the following components:

We guarantee that our PSAK-47 GB2 Barreled Receiver is compatible with our PSAK-47 Build Kits.  Our PSAK-47 Barreled Receiver may be compatible with other AK-47 parts, but we cannot guarantee compatibility with other companies parts & furniture.

PSAK-47 GB2 standard barreled receiver comes with these components and features: 

  • Nitride finished 4150v steel barrel installed
  • Stamped steel receiver with trigger guard installed
  • Billet Barrel Block (front trunnion)
  • Side Scope Mount Installed
  • Std. 800-yard rear sight leaf assembly installed
  • Bullet Guide Installed
  • Front sight post and windage drum installed
  • Dust cover fit and serialized
  • Fully assembled serialized billet bolt, head spaced to the receiver
  • Serialized and pre-fitted dust cover
  • Serialized and pre-fitted gas tube
  • Serialized and fully assembled hammer forged steel carrier with gas piston

Items needed convert your PSAK-47 Standard Barrel Receiver into a fully functional PSAK-47 rifle are the following and can be found HERE:

  • Fire control group
  • Safety Lever
  • Grip
  • Stock,
  • Upper and lower forearm
SKU: 516445301B
SKU 516445301B
Brand Palmetto State Armory
Daily Deal No
Daily Deal Expires No
Youtube Video No
Free Shipping? No
SKU: 516445301B

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!


4.5 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
great price poor quality
Well this is the second one first had to be sent back cast carrier a bolt that looked like was assemble by a child with a rock and bad head space. Well number two is going back the finish looked great but that's all first the chamber is to tight will not fully lock on a Go gauge the extractor has not tension to hold cartridge the real kicker magazines wont fit in including the P-Mags they sent with it. no flat center support sleeve. But they have been good with customer service and sending out call tags!!!!! Come on guys everything else i purchase great please figure how to produce a quality American AK 47 especially cause they are from my birth state
May 19, 2017
This along with the build kit.
Been looking at these for a while now and finally got it. Opted for this receiver because of the hammer forged bolt carrier and because it's a gen2. Also bought it because of it being a blem. I want them to run not sit in a safe so blem doesn't matter to me. When it arrived I inspected before transferring and couldn't find any blems. That's okay I'll put some on it soon enough. Everything seems to fit snug to tight. Should loosen up with use but it being tight isn't a bad's new so expected. No cant on the sights. Everything is well oiled and slides easily. You'll have to read about the build kit in that section. Spoiler gets 5 stars too. It's the PSAK-47 GB2 MOE RIFLE BUILD KIT BLACK WITH ALG DEFENSE AKT FIRE CONTROL GROUP - 516444723 It is an incredible trigger. So far PSA has never disappointed. This is a very nice addition to their line. Thanks to PSA.
May 7, 2017
top notch
Got mine put together. Everything went nicely. Everything is on the tight side so I had a few hangups the first 2 mags.... All is well after it broke in. Alg trigger is well worth it...
May 6, 2017
Great Deal With A Little Effort
The receiver looks pretty good. This is the first time I purchased something that was labeled blemished that actually had some blemishes on it. The top of the rear sight had some wear marks on it along with the carrier missing just a little paint (not from wear but from inaccurate painting). It is only the rear right side of the receiver(from shooter's perspective) so it is not bad. It's an AK...not an art piece. It doesn't have to be perfect. The blemishes are not why I docked it a star on quality.
I have a couple good quality mags lying around from other guns and found that the center rivet in the receiver is completely round. Most of my mags did not fit in because they would hit that rivet. I flattened out the front of that rivet with a dremmel so I would not have to mod all of my mags. I've always seen flat or semicircle center rivets in AKs but this receiver's was circular. Not sure if it was tacked too far forward or they ran out of good flat rivets but I want my AK to run an mag I throw at it preferably without hitting it with a dremmel.
The dust cover was incredibly stiff to get off as well. I had to smack the hell out of it with a rubber mallet on the rear of it to get it to properly seat in the rifle (and that's without guide-rod and spring putting load on it). I would have to stick my hands into the rifle (safety down fingers under the dust cover and behind the carrier) to pry it off at first.

I'm not afraid of putting some work into a gun...especially a build! I really enjoyed this build and the final product is beautiful! It took just a little extra work but have full trust in this rifle. Don't be afraid to get your hands a little dirty and earn yourself some pride (and a fantastic rifle). It's not a box of leggos but all those pieces do go together with a little help. I'd rather have a rifle a little to tight than a little too loose. I highly recommend this receiver to anyone who wants to build an AK. The final product is awesome!
May 1, 2017

Customers Who Viewed This Item Also Viewed