Lead Star Arms Prime AR-15 Rifle .223 Wylde, Gunmetal w/ Red Accents
Extra 10% Off In Cart
|Brand||Lead Star Arms|
Chamber: .223 Wylde
Barrel Length: 16”
Barrel Material: 4150V Chrome Moly Vanadium Steel
Barrel Finish: Nitride
Barrel Profile: A2 Style
Twist Rate: 1 in 8”
Muzzle Device: Enhanced Muzzle Break
Muzzle Thread: ½” x 28
Gas System: Carbine-Length
Gas Block Type: Micro style .750” Diameter
Upper Receiver: Lead Star Billet 7075 T6 Aluminum
Receiver Style: M4 Flat top with feed ramps
Receiver Finish: Hardcoat Anodized
Forward Assist: Yes
Dust Cover: Yes
Handguard Style: Lead Star Ravage Carbon Fiber 15" MLOK Handguard
Bolt Steel: Carpenter 158
Bolt Carrier Steel: 8620
Staked Gas Key: Yes
Lower Receiver: Lead Star Billet 7075 T6 Aluminum
Receiver Finish: Hardcoat Anodized
Grip: Ravage™ ultra-lightweight grip
Fire Control Group: Enhanced Hiperfire® ECL competition straight bow trigger
Buffer Tube: 7075 T6 Aluminium Mil-Spec Tube
Stock: Lead Star Ravage™ fixed stock
Magazine: (1) 30-Round Magazine (where available by law)
Used by and choice of World Champions, our Prime™ series is the ultimate featherweight rifle giving you a competitive advantage. Lower your times and take the competition by storm by choosing one of these blistering pace weapons.
Upper Receiver: Fully CNC machined from 7075-T6 aluminum for extreme precision and enhanced durability. Skeletonized for further weight reduction. Flat top picatinny design for versatility in mounting optics and other enhanced components. CNC engraved numbered rail system. Lead Star's truss system design reinforces key areas for increased strength without added weight. M4 feed ramps for added reliability.
Lower Receiver: Incorporates the enhanced features of the upper receiver and includes the TracStar™ magwell with a full traction design. Designed for the operator to grip and maintain weapon control even in the most extreme conditions. Beveled magwell entry allows faster magazine changes. Skeletonized for further weight reduction. Tension device to maintain rigidity between upper and lower receivers. Rear detent spring capture device to facilitate easier removal of the buffer tube. Built-in trigger guard eliminates the need for a flip-down trigger guard.
15" Handguard: Ravage Carbon Fiber Eliminates harmonics from attached accessories greatly improving weapon accuracy. Full-length M-LOK at the 3, 6, 9, &12 o'clock position for mounting only the picatinny rail needed or accessories.
Fire Control Group: Enhanced Hiperfire® ECL competition straight bow trigger. Adjustable shoe and springs can be customized to 15 possible trigger weights. Hipershoe® for trigger finger comfort and adjustability.
Fire Selector: Radian™ Talon™ ambidextrous safety selector modular design that can be installed as a standard 90° or as a 45° short throw by simply rotating the shaft 180° inside the lower receiver. Selector levers install using a precision machined dovetail interface with a spring-loaded retention stud to lock the lever in place, with no screws to come loose or break. Levers are machined from billet aircraft grade aluminum and the center shaft is machined from hardened steel with a black nitride finish.
Barrel: 16" 4150V .223 Wylde chamber. 1:8 Twist with 1/2"-28 muzzle device threads.
Bolt Carrier Group: M16 profile with black nitride QPQ finish and properly staked gas key. Carpenter C-158 black nitride QPQ finish bolt for maximum dependability.
Charging Handle: Lead Star Ambidextrous charging handle with unique design geometry produces a faster release and a linear pull. The extended design allows easier charging with added optics and sights. High strength for added reliability under extreme conditions.
Anti-rotation Pins: designed for a more consistent trigger pull weight and captures trigger pins increasing reliability.
Gas System: Direct impingement with a mid-length gas system to reduce recoil and minimize wear on moving parts.
Muzzle Device: Enhanced design compensator dramatically reduces recoil. Unique geometry minimizes muzzle rise for faster follow-up shots. Pre-drilled on the bottom for pinning muzzle brake to the barrel. Precision CNC machined steel. Black nitride coating for durability in extreme conditions.
Finish: Type II Class 3 anodized. Due to the chemical process that takes place during anodizing, the finish on the product can vary, even if it is the same batch.
Grip: Ravage™ ultra-lightweight grip with traction grooves on all sides. Ultimate in comfort, every edge is rounded or chamfered. Skeletonized design for maximum weight savings. High strength for added reliability under extreme conditions. Precision CNC machined 6061-T6 aluminum.
Stock: Ravage™ fixed stock design with cheek weld. Extends stock out to 9-1/2" from the rear of the lower receiver making it more comfortable to shoot. Precision CNC machined from 6061-T6 billet aluminum. High strength for added reliability under extreme conditions. Super lightweight at only 6.0 oz. Slot for easy attachment of sling.
Castle Nut: Ultralight design for further weight reduction and strength. Precision CNC machined from 7075-T6 billet aluminum.
Receiver End Plate: Ravage™ enhanced design allows for mounting QD swivel sling attachment. Raised QD attachment point makes attaching sling easier and faster. Precision CNC machined from 6061-T6 billet aluminum. High strength for added reliability under extreme conditions.
Magazine: Comes standard with 1 Magpul® 30 Round MOE® PMAG® black magazine.
Q & A
These items are controlled by the U.S. Government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Magazines will be removed from firearms when shipping to states with magazine capacity restrictions.