PSA 10.5" 5.56 NATO 1:7 Nitride Pistol Kit - 507629

More Views

PSA 10.5" 5.56 NATO 1:7 Nitride Pistol Kit - 507629

In stock

Regular Price: $ 449.99

Special Price $ 389.99

Quick Overview

It is the customer's responsibility to be aware of all applicable laws and regulations regarding the purchase and ownership of uppers with a barrel length of less than 16". Federal NFA regulations are applicable to this item.

SKU: 507629
UPC: 507629
MFR#: 507629

10.5" Barrel Length
Carbine Gas System
Nitride finish Barrel
5.56 NATO Chamber
1 in 7" Twist Rate
PSA Standard Handguards
F-Marked Front Sight Post
A2 Flash Hider 
Forged Upper Receiver
T-Marks
Classic Pistol lower build kit. 

No bayonet lug on front sight base

Add To:

Barrel: Nitride finished chrome-moly barrel. Chambered in 5.56 NATO, with a 1:7 twist, M4 barrel extension, and a carbine-length gas system. Barrel is is finished off with a classic carbine-length handguard, F-Marked gas sight base, and A2 flash hider.

Upper: Forged 7075-T6 A3 AR upper is made to MIL-SPECS and hard coat anodized black for durability. Featuring machined T marks, and a mil-spec finish. These uppers are made for us right here in the USA by a mil-spec manufacturer.

Lower Build Kit:  PSA Classic Pistol lower build kit with 7075 pistol tube. double loop latch plate, and classic fire control group.

SKU: 507629
SKU 507629
Brand Palmetto State Armory
Daily Deal N/A
Daily Deal Expires N/A
Youtube Video N/A
Free Shipping? N/A
SKU: 507629

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 3 answers
Is it possible to attach 5.5”+ suppressor to this kit and then put regular buttstock on and be legal?
M G on Jun 8, 2018
BEST ANSWER: NO, and the reason is.. a 10.5" bbl is not long enough, you need a 11.5" bbl to go with the 5.5" FH due to .5" thread overlap between the barrel and FH, you would only be at 15" when completed, which is still SBR / Pistol length. And..it would need to be permanently attached by blind pin and/or welding, not silver soldering.

Reviews

4.9 / 5.0
10 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
9
1
0
0
0
Acurate pistol
I've had this kit for about six months now. Put it together with an Anderson lower and MATECH rear site. Front site is positioned straight. I like the Nitride finish. No malfunctions even with low powered steel cased ammo. Shooting prone unsupported and using a two point sling pulled tight will keep my groups in the 2" range with cheap Tula 55 grain. Haven't tried heavier grain bullets yet.
April 28, 2017
Excellent kit!
I ordered this kit to do a build on an Anderson lower I had sitting in my safe. It arrived quickly and was excellent quality for the price. Mine came with a bayonet lug on the front which was an added surprise. All of the parts for the lower build kit went in quickly and easily just like my past builds. Total I'm only in to this rifle for about $500 with the kit the lower match grade rear sight and a brace. This is my 4th PSA rifle and I would highly recommend this (or any PSA rifles or parts) to anyone who wants to do a cheap quality build. I'll update this after I run the rifle through it's paces.
May 4, 2016
Awesome deal for the money!
Ordered on a Thursday had it on Monday! Fastest I've had from PSA! For the price you can't beat this! Let's face it of you are getting this you're just not wanting to pay the 200 dollar tax stamp for having a short barreled rifle! I mean to be frank about it! This is the way to go just get a sig brace or a thordsen forearm brace and a good optic you are good to go! Thanks PSA you always have to good deals for the quality!
April 20, 2016
Outstanding!
I ordered received and built this kit! I assembled it on an Anderson lower. The only problem I encountered was the pistol grip screw hole on the Anderson lower wasn't tapped all the way. I had to add a couple of washers to the supplied screw to tighten it down. Anderson's fault not the PSA kit! I will be buying more!
March 15, 2016
Excellent value and quality
Operation was flawless and surprisingly accurate. Fit and finish was perfect. Did not experience long shipping times and packing was more than adequate. Totally satisfied with purchase and service. Did recommend to friends. Great job!
March 13, 2016
Nice kit
Barrel nut wasnt clocked right put gas tube at an angle so rubbed the gas key. PSA sent shipping label was fixed in a week. Runs great goes BLAP BLAP BLAP BLAP BLAP BLAP
March 11, 2016
quality product/ great price
this is a quality product at a great price. this is my second purchase of this product and love them shipping was fast as well.
February 25, 2016
Great pistol upper
I bought this kit and a stripped lower to make an Ar pistol. I had heard a number of negative reviews about the shorter barrels especially those with the pistol length gas tube. The carbine length gas tube was what made me lean towards this particular kit. I was a little apprehensive about firing this once I had it completed given the arthritis in my wrist. Thankfully the recoil was incredibly light even more so than a 9mm pistol. I have not experienced any malfunctions during my outing with the build. I really like the quality to price point that PSA offers and two of my three AR platforms have come from here.
February 24, 2016
A lot of bang for your buck!
As usual this is quality PSA product. I built the rifle on a stripped Anderson lower test fired it zeroed it loved it! The melonite finish on and in the barrel is great and cleaning was a breeze. I love the look of the front sight on the short 10" barrel and the flutes in the receiver extension. One word to PSA tho you need list that the kit comes with a complete HP/MPI laser engraved PSA Bolt carrier group. I see it pictured but it isn't mentioned in the text. To me that adds a lot of value to the kit vs. a generic no name BCG.

This would make a great home defense or truck gun. You can rely on it to work when needed but not have a lot of money tied up in it to worry if it sees abuse or neglect.
September 10, 2015
Super Fast Shipping Great Parts
I ordered this kit on a Sunday it arrived the following Thursday. Fit and finish was great and the upper black blended and fit with my Anderson lower like it was made to. This was my first AR build and I was a little apprehensive about it. I followed a guide online and had it set up in less than an hour the only special tools I needed was a roll pin punch set from my local hardware store. After reading some critiques about long shipping times with this company I was prepared to wait a little bit for such a good price but that was not the case on this order. I was pleasantly surprised when I received the tracking number the day after ordering. Palmetto gained a loyal customer with this one and I can't wait to build another one. Thanks!
August 28, 2015

Customers Who Viewed This Item Also Viewed