PSA 10.5" 9mm 1/10 GX 2A Armament Keymod MOE SOB EPT Pistol - 516447502

More Views

PSA 10.5" 9mm 1/10 GX 2A Armament Keymod MOE SOB EPT Pistol - 516447502

TEMPORARILY OUT OF STOCK

Quick Overview

Must be 21 or older to purchase.

If you live in California, please read this notice before ordering.

It is the customer's responsibility to be aware of all applicable laws and regulations regarding the purchase and ownership of uppers with a barrel length of less than 16". Federal NFA regulations are applicable to this item.

WARNING: This product can expose you to the chemical lead, which is known to the State of California to cause cancer and reproductive harm. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

SKU: 516447502
UPC: 516447502
MFR#: 516447469

Barrel Length: 10.5"
Gas System: Blowback
Barrel Profile: A2
Barrel Steel: 4150V Chrome Moly Steel
Barrel Finish: Nitride
Chrome Lining: None
Muzzle Thread: 1/2-36
Chamber: 9mm (9x19)
Twist Rate: 1 in 10"
Barrel Extension: Blowback
Diameter at Gas Block: N/A
Gas Block Type: N/A
Muzzle Device: PSA A2 Style Birdcage Flash Hider
Receiver Material: Forged 7075 T6
Receiver Type: M4
Handguard Type: 2A Armament Keymod Free Float
Bolt Carrier Group Included: Yes
Bolt Steel: 8620
Bolt Carrier Profile: 9mm Hybrid
Charging Handle Included: Yes
Lower Receiver: Forged 7075 T6 Aluminum
Receiver Finish: Hardcoat Anodized
Fire Control Group: Single-Stage, Enhanced Polished Trigger (EPT)
Grip: Classic Magpul Grip, Black
Buffer Tube: 7075 T6 Aluminum Pistol Buffer Tube
Adjustment: Fixed
Pistol Brace: SB Tactical SOB Pistol Brace, Black
Magazine: ETS Clear Magazine, 31 Round

Add To:

Barrel: 10.5" chrome moly steel barrel. Chambered in 9mm, (9x19), with a 1/10 twist. The barrel is nitride treated for durability and finished off with a 2A Armament 10" Keymod free-float rail and an A2 style birdcage flash hider.

Upper: Forged 7075-T6 A3 AR upper is hard coat anodized black for durability.  These upper receivers are made for us right here in the USA.

Bolt Carrier Group: G-9 Hybrid 9mm BCG. Phosphate coated, 8620 steel, G-9 Hybrid Bolt allows use with either Glock®-style, or Colt®-style magazine, Palmetto State Armory lowers. Includes charging handle.

Lower:. Forged 7075 T6 aluminum and then hard coat anodized, these lowers are purpose built to accept 9mm Glock®-style magazines.   Designed to work with PSA's new 9mm Hybrid uppers.  The lower is assembled with a Palmetto State Armory MOE EPT pistol  lower build kit with a Magpul Grip, Enhanced Polished Trigger (EPT), PSA pistol buffer tube, and SB Tactical SOB Stabilizing Brace.  Does not include last round bolt hold open feature.

SKU: 516447502
SKU 516447502
Brand Palmetto State Armory
Daily Deal N/A
Daily Deal Expires N/A
Youtube Video N/A
Free Shipping? N/A
SKU: 516447502

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Reviews

3.5 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
1
0
flawless
1500 rounds down range and the only failure we had was 1 failure to feed. pretty sure this was are mistake by not seating the mag all the way. would totally buy again in a heart beat.
May 5, 2018
Purchased
5 months ago
Extractor fell out first time shooting it!
This was my first PSA full gun purchase. I was let down on two fronts. First, it came blemished when I ordered new. PSA did give me a credit for one of the receivers being blemished although top and bottom were blemished. They said when you buy whole gun, receivers are considered one piece. Second, none of the fasteners were properly torqued or loctited. My Extractor fell out during the first range visit! I chose to take care of this my self by dimpling the extractor and resetting the screws with proper torque and loctite and putting loctite in every recommended place where it should go. The gun has fired flawlessly since I fixed it. The thing is that I shouldn't have to fix it when bought new!
April 27, 2018
Purchased
5 months ago
Response from Palmetto State Armory
We do apologize for that Juan. Since that upper and all of our parts and firearms are covered by our Unlimited Lifetime Warranty, if you have any issues arise from the craftsmanship of the product, we can either have select parts sent to you for you to replace, or we can have the item brought in, at no cost to you, so we can repair or replace the defective product. Please contact Customer Service if you have any questions or issues.
April 27, 2018
Casey S

Customers Who Viewed This Item Also Viewed