PSA 10.5" Carbine-Length 5.56 NATO 1/7 Nitride 12" Slant M-Lok MOE EPT SBA3 Pistol Kit w/MBUS Sight Set, NiB BCG, & Sparc + 10 PMAGS

More Views

PSA 10.5" Carbine-Length 5.56 NATO 1/7 Nitride 12" Slant M-Lok MOE EPT SBA3 Pistol Kit w/MBUS Sight Set, NiB BCG, & Sparc + 10 PMAGS

In stock

Special Price $ 619.99

Regular Price: $ 1149.99

Quick Overview

It is the customer's responsibility to be aware of all applicable laws and regulations regarding the purchase and ownership of uppers with a barrel length of less than 16". Federal NFA regulations are applicable to this item.

WARNING: This product can expose you to the chemical lead, which is known to the State of California to cause cancer and reproductive harm. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

SKU: 5165458321
UPC: 5165458321
MFR#: 5165458321
  • Barrel Length: 10.5"
  • Barrel Profile: A2
  • Gas System: Carbine-Length
  • Barrel Steel: 4150V Chrome Moly Vanadium
  • Barrel Finish: Nitride
  • Chrome Lining: No
  • Muzzle Thread: 1/2x28
  • Chamber: 5.56 NATO 
  • Twist Rate: 1:7
  • Barrel Extension: M4
  • Diameter at Gas Block: .750
  • Gas Block Type: Low-profile
  • Muzzle Device: PSA Fluted Flash Can
  • Receiver Material: Forged 7075 T6 Aluminum
  • Receiver Type: M4
  • Handguard Type: PSA 12" Slant End M-Lok Rail
  • Bolt Carrier Group Included: Yes
  • Bolt Steel: Carpenter 158, Nickel Boron
  • Bolt Carrier Profile: Full-auto
  • Charging Handle Included: Yes
  • Overall Length: 21"
  • Build Kit: MOE SBA3 EPT Pistol Kit, Black
  • Magazines: Magpul PMAG 30 Rd 5.56x45mm Magazine x 10

Add To:

Barrel: 10.5" 4150V Chrome Moly vanadium steel, nitride treated for accuracy and durability, and chambered in 5.56 NATO with a 1 in 7" twist. Carbine-length gas barrel is finished off with a PSA 12" Slant End M-Lok Rail, a low profile gas block and a PSA Fluted Flash Can.

Upper: Forged 7075-T6 A3 AR upper is made to MIL-SPECS and hard coat anodized black for durability. Featuring a mil-spec finish, these uppers are made for us right here in the USA by a mil-spec manufacturer.

Flash Can: Palmetto State Armory's Fluted "FLASH CAN". This is a solid 6061 aluminum device that is designed to direct muzzle gases and the muzzle flash forward. Threaded 1/2x28 for 5.56 NATO. Black military-style hard anodizing. THIS DEVICE IS NOT DESIGNED TO REDUCE RECOIL, MUZZLE RISE, OR FLASH SIGNATURE. This device is designed to direct gasses and noise forward away from the shooter and enhance the weapon's appearance.

Bolt Carrier Group: ToolCraft nickel boron BCG has a bolt made of mil-spec shot-peened Carpenter 158 steel. Gas key is secured with grade 8 fasteners and staked per mil-spec.

Build Kit: A high quality lower build kit with everything you need to assemble your AR-15 lower into a pistol. Features Enhanced Polished Trigger (EPT), Magpul Grip, Magpul Trigger Guard, and black oxide coated hammer and trigger springs. Also includes SB Tactical SBA3 Adjustable Pistol Brace, castle nut, latch plate, carbine buffer spring, 5 positioning mil-spec buffer tube, and standard carbine buffer.

**Includes 10 Magpul 30rd 5.56x45mm Magazines.

SKU: 5165458321
SKU 5165458321
Brand Palmetto State Armory
Daily Deal No
Daily Deal Expires No
Unit Price N/A
Youtube Video No
Free Shipping? No
Free Shipping Qty Label No
Free Shipping Qty No
SKU: 5165458321

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 21 questions Browse 21 questions and 20 answers
Is the Sparc red dot included? It is shown in the picture but not mentioned in the description.
Rick D on May 13, 2019
BEST ANSWER: Yes, it is included.
what model sparc is it?
JakeB on May 21, 2019
BEST ANSWER: If it is as shown in the pic then it is the SPARC AR.
If I live in Colorado, which disallows magazines over 15 rounds, can I purchase this? Would I just send them a note and ask them to not ship the mags then send it to an FFL?
Frank on Jun 3, 2019
BEST ANSWER: Go to Centennial Gun Club. They have "magazine parts kits". I used to fly to Sydney or Cheyenne to get mags.

Hey PSA, would you please offer said parts kits? It's legit here in CO. With the floorplate separated and the spring hanging out it no longer fits the legal definition of a magazine. It would be illegal for us to assemble it... Which we obviously would never do... A few places have been doing it here since 2013, no issues.
What magazines ship if my state has 15 round max capacity law?
Spartan on Jul 4, 2019
BEST ANSWER: Move to a free state.
I have been advised that in FL the lower must be stamped with the phrase “multi use” as opposed to 5.56. The theory being that 5.56 is a rifle round thus making this a rifle. How is the lower unit stamped?
James S on Jun 13, 2019
BEST ANSWER: does not come with a lower.
Overall length? Please and thank you
Gary on Jul 15, 2019
What is the inside diameter of the rail? Trying to see if a can will fit.
Dave Y on Jun 24, 2019
Hi,
I'm interested in turning making an AR rifle. This is by far best combo deal on the site. Can I turn this into a rifle by buying a 16" barrel and substituting it for the 10.5" one? Would I have to change any other parts?
Steve on Jun 23, 2019
BEST ANSWER: You would need to change the buffer tube and brace. Aswell as the barrel.
can this also shoot .223?
Cesar N on Jun 20, 2019
BEST ANSWER: In short, yes. Try google for the long version.
Will this build accept a silencer?
Dennis G on Jul 11, 2019
BEST ANSWER: Which 'silencer' do you have?
What is the barrel profile before the gas block?
Michael D on May 26, 2019
BEST ANSWER: Barrel Profile: A2
Will this ship to California?
Xerox on May 21, 2019
BEST ANSWER: Sounds like everything but the mags unless you are law enforcement (according to what they feel law enforcement are) and have signed doc's from your department head
Will the AAC762-SDN-6 with the appropriate compensator adapter work for this particular upper assembly?
Alan Q on Jul 5, 2019
PSA 10.5
PSA 10.5" Carbine-Length 5.56 NATO 1/7 Nitride 12" Slant M-Lok MOE EPT SBA3 Pistol Kit w/MBUS Sight Set, NiB BCG, & Sparc + 10 PMAGS
AAC 762-SD Silencer 51T - - 103649
AAC 762-SD Silencer 51T - - 103649
Will this ship to michigan?
Dennis J on Jul 16, 2019
BEST ANSWER: Hello,

I am not aware of any restrictions.

Best Regards,
(Name of Employee Removed)
PSA Customer Service
Aside from the lower receiver, is there anything else not included? I can't tell if for example, if the trigger guard is included.
Reaver960 on Jul 9, 2019
BEST ANSWER: Hello,

Yes, the lower receiver is the only thing you will need.

Best Regards,
(Name of employee removed)
Palmetto State Armory Customer Service
I plan on using a Yankee hill phantom suppressor with this set up. Are the threads fully exposed beyond the rail or partially covered?
MikeW on Jul 2, 2019
BEST ANSWER: The threads are covered by the rail on this upper.
Does the kit come with the front and rear folding sights as pictured?
James M on Jul 1, 2019
BEST ANSWER: Yes, it does.
Does the muzzle device increase dwell time?
Joshua S on Jun 7, 2019
BEST ANSWER: No
I lived in Colorado. Can the 30rd mag be replaced with 15rd magpul mags?
Tungyu S on Jul 16, 2019
What type of lower would work best gen 1 or gen 2 ?
B C on Jun 29, 2019
Can the mags be sent to New York with my LEO ID?
Kevin W on May 13, 2019

Reviews

4.6 / 5.0
22 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
16
4
2
0
0
Great Value, Reliable, Ok Accuracy
In the last week I’ve put 400rds down range with this build. It has run flawless except for 1 FTF, which IMO was magazine related. I’ve run 7 different loads without a hiccup — 55g in .223 (Federal) and 5.56 (Federal and Winchester) brass case, 55g steel case Tula, 62g green tip XM855, 69g Razor Core from IMI Systems, and 77g SSA by Nosler. It has all run great in the 10.5, including mags loaded randomly with all of those. Accuracy has not been great, (3-4 moa at 50yrds with the sparc on a bench rest) but I’ll reserve full judgement until I can test with better optic. I know this is early in the life cycle but i’m impressed so far.
The value of this package is really REALLY good! The NiB BCG, SBA3, Vortex Sparc, and 10 gen2 Pmags are conservatively a $350-$400 value alone. If you’re looking for a fun range “pistol” in 5.55 I don’t think there is a better value to be had out there. Overall, I’m very pleased with this kit for the price and I’ll be a return customer for sure. Well done PSA.
Paired with an Aero lower and Hogue grip I had sitting around
User submitted image
July 21, 2019
Purchased
2 weeks ago
Awesome great value everything needed except lower to build complete pistol
July 20, 2019
Purchased
2 months ago
Great buy, fast shipping overall satisfied!!!!
Loved this buy, couldn’t have asked for a better AR for my first build. Palmetto state has some of the best prices and there products are great!!!!
More than I expected and a great price all I did was add the lower with a new charging handle!
More than I expected and a great price all I did was add the lower with a new charging handle!
July 20, 2019
Purchased
2 months ago
10/10
highly recommend any palmetto parts, prices are amazing when compared to quality
User submitted image
Added Jul 20, 2019
July 20, 2019
Purchased
2 months ago
Awesome deal!!
I wasn't really sure I could put this together but after I searched around and found some good instructions it was fairly easy. I put it on an Anderson stripped lower which has a color mismatch but it functions. Mags,sights and red dot were extras and to be honest the thing looks badass! They even sent an extra spring and pin knowing I'd lose one but found it later. lol. Awesome job PSA!! Took 6 days to get. I would definitely recommend. Shoot em if you got em.....FREEDOM!!!
Awesome freedom toy!!
Awesome freedom toy!!
July 16, 2019
Purchased
2 weeks ago
Quality pistol build
Turned out amazing, great product, easy to build, and shoots great well worth the money
July 12, 2019
Purchased
2 months ago
A Christmas Story
This is my first purchase with Palmetto. I’m currently overseas but each night I dream like Ralphie from A Christmas Story about building this into a beautiful pistol. Going to use the deplorables lower. Can’t wait to upload pictures once it is all put together.
July 12, 2019
Purchased
1 month ago
Great deal, Great pistol.
Great pistol. I will buy more from PSA. Went together with no issues. Shots great. Shots as well as pistols that cost twice as much and they didn't come with all the extras. Highly recommend.
July 12, 2019
Purchased
3 weeks ago
Jump on this deal ASAP you won’t regret it
Great deal, fast shipping ( ordered July 3rd arrived July 8th) everything looks great optic is great and clear, nickel bolt is smooth and unblemished, I am a return PSA customer and I bought a completed AR pistol last time , and it’s the best one in my inventory. I will 10000000% be buying again from PSA
User submitted image
User submitted image
July 8, 2019
Purchased
2 weeks ago
Great Deal!
This is my first AR-15 build. Paired well with the PSA stripped lower. I put it together in about 1.5 hours. I sent one detention pin and spring across the room, but I found it. Lol This is a great deal. Upgraded ni B bolt carrier. 10 mags, sparc red dot sight. Pop up sights and I bought some ammo for less than a base model off the shelf at a sporting good store.
July 7, 2019
Purchased
3 weeks ago

Customers Who Viewed This Item Also Viewed