Nitride ar 15 kit with handguard

More Views

PSA 16" M4 5.56 NATO 1:7 Nitride 13.5" Lightweight M-Lok MOE EPT Rifle Kit w/ MBUS Sight Set

In stock

Special Price $ 399.99

Regular Price: $ 699.99

Quick Overview

free shipping Free Shipping applies to this item only and not the entire order.

WARNING: This product can expose you to the chemical lead, which is known to the State of California to cause cancer and reproductive harm. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

SKU: 5165447811
UPC: 5165447811
MFR#: 5165447811

Barrel Length: 16"
Gas System: Carbine
Barrel Profile: M4
Barrel Steel: 4150 Chrome-Moly Vanadium
Barrel Finish: Nitride
Chrome Lining: None
Muzzle Thread: 1/2-28
Chamber: 5.56 NATO
Twist Rate: 1:7
Barrel Extension: M4
Diameter at Gas Block: .750
Gas Block Type: Low-profile
Muzzle Device: A2 Flash Hider
Receiver Material: Forged 7075 T6
Receiver Type: M4
Handguard Type: PSA 13.5" Lightweight M-Lok Rail
Bolt Carrier Group Included: Yes
Bolt Steel: Carpenter 158
Bolt Carrier Profile: Full-auto
Charging Handle Included: Yes
Optics: Magpul MBUS Front and Rear Flip-Up Sights, Black
Fire Control Group: PSA Enhanced Polished Trigger (EPT) FCG
Overall Length: 24.5"
Weight: 4.0 lbs

Add To:

Barrel: 16" 4150V Chrome Moly Vanadium steel barrel, chambered in 5.56 NATO, with a 1:7 twist, M4 barrel extension, and a carbine-length gas system. The barrel is finished with with a .750" diameter low-profile gas block, PSA 13.5" Lightweight M-Lok Free Float Rail and an A2 flash hider.

Upper: Forged 7075-T6 A3 AR upper is hard coat anodized black for durability. Featuring M4 feedramp cuts, these upper upper receivers are made for us right here in the USA.

Bolt Carrier Group: For AR15 and M16 rifles and carbines. Bolt is made of shot-peened, Mil-spec Carpenter 158® steel. Gas key is secured with grade 8 fasteners and staked. Bolt carrier is parkerized outside and chrome lined inside. Includes Charging Handle.

Lower Build Kit:  PSA MOE EPT Lower Build Kit, Black

Includes: Magpul MBUS Sight Set, Black 

SKU: 5165447811
SKU 5165447811
Brand Palmetto State Armory
Daily Deal No
Daily Deal Expires No
Unit Price N/A
Youtube Video No
Free Shipping? Yes
Free Shipping Qty Label No
Free Shipping Qty No
SKU: 5165447811

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 8 questions Browse 8 questions and 17 answers
I noticed this hand guard doesn't have the continuous rail in the picture, is this accurate or just a incorrect stock photo?
Jeffrey S on May 1, 2018
What lower would work good with this upper?
Bruce B on Apr 16, 2018
BEST ANSWER: I have an Anderson forged lower with the same upper but it's a mid length gas system and it's perfect
does kit come with buffer and what other parts are required that do not come in the kit other than lower receiver?
jeff a on Apr 17, 2018
Does this kit come with an extra detent and detent spring?
Mike P on Apr 26, 2018
BEST ANSWER: Yes, it did come with an extra detent and detent spring. I thought to myself, "oh no, I forgot to put those in," which is probably what you're thinking too. Just find a youtube video or online instructions (there are thousands of them) and you'll quickly realize that you do, indeed, have a couple extra parts. Hope your build goes as well as mine (my first) did.
This will be my first build so I want to make sure I'm getting the right stuff. I have Anderson Manufacturing AM-15 Multi Cal lower receiver. Will it work for this kit?
Richard R on Apr 29, 2018
BEST ANSWER: Yes, it should all work together with your Anderson reciever.
Is this handgaurd free float?
Joseph on Nov 30, 2018
BEST ANSWER: Yes, it is and I've been very happy with this upper and kit. Highly decremented.
Does this ship to home or ffl ?
Kenneth G on Apr 16, 2018
BEST ANSWER: Home or wherever you want it to be sent. The lower receiver is the only peice that must go threw FFL
Does it come with instructions for a first time builder? What tools do I need - armorer's wrench, grease?
Lee S on Nov 27, 2018
BEST ANSWER: If you haven’t done so already, watch some YouTube guides on building. They will tell you the tools to buy. It wasn’t too difficult. Note: my barrel was not dimpled for the gas block, and the gas block screws were not threadlocked. You might also consider getting a dimpling jig or replacing the gas block with a clamp-on type.

Reviews

4.8 / 5.0
22 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
18
3
1
0
0
Looks good. But the two misfires make it the last gun to grab in an emergency.
Assembled and try twice to shoot, but it failed to fire. Both shells had no marks which trigger failed to hit. Paid shooting range fee and tried it again at home. This time it fired. Surprise me. Do not know what was the problem. I have not time to shoot again.
User submitted image
Added Mar 21, 2019
March 21, 2019
Purchased
6 months ago
Great buy!
Went together very nicely with my Anderson lower. Perfect fit with no play at all. Gun performs very well.
User submitted image
Added Jan 28, 2019
January 28, 2019
Purchased
7 months ago
Great
Works like it should! :)
January 26, 2019
Purchased
7 months ago
Would definitely buy again
Really happy with the build quality and value. Put it on an Anderson lower and it runs flawless.
January 25, 2019
Purchased
8 months ago
Light and worth it!!
I built one of these for a friend to put on his airboat for gator hunting, light enough to handle with one hand and he loves it! Would make a great gun for the ladies.
August 18, 2018
Purchased
1 year ago
I love this gun!! I would recommend buying all the parts from the same manufactuerer but its great!
July 29, 2018
Purchased
1 year ago
Primo stuff
I love their quality control, and fast shipping, and the quality is hard to beat, along with the life of the kits and accessories, Prices are always on the average cheaper
July 3, 2018
Purchased
1 year ago
Love my new toy. Easy to put together, everything works great, and only took like a week to get delivered to my front door. Thank you.
May 20, 2018
Purchased
1 year ago
Best Value Around
Paired this up with an Anderson lower and there is no wobble between the upper and lower. Love the cut of the handguard, the shaved rail really gives it a nice feel. The stainless trigger is cool. Trigger springs are very stout. I tend to swap out for the CMC drop in trigger and will more than likely change this. The magpul furniture is always great.
May 20, 2018
Purchased
1 year ago
Just as expected
Came very fast despite the advised backorder. All parts needed are there and in good condition. No complaints, works great with my Anderson Lower.
User submitted image
Added May 17, 2018
May 17, 2018
Purchased
1 year ago

Customers Who Viewed This Item Also Viewed