PSA 20'' CHF Rifle Length 5.56 NATO 1/7 A2 Upper - NO BCG or Charging Handle - 30796

More Views

PSA 20'' CHF Rifle Length 5.56 NATO 1/7 A2 Upper - NO BCG or Charging Handle - 30796

TEMPORARILY OUT OF STOCK

Quick Overview

SKU: 30796
UPC: 810022020647
MFR#: 30796

20" Barrel length
"Machine Gun Steel" barrel
5.56 Nato Chamber
1 in 7" twist rate
Extra-thick chrome-lined bore
M4 Feed ramps
F-Marked Front sight post
A2 Flash Hider
Sling Loop
Rifle Hand Guards w/ heat sheilds
Forged upper receiver
T-Marks

Does not include BCG or Charging Handle

SKU: 30796

Add To:

Barrel:  A proprietary blend of Hammer forged chrome molly vanadium made by FN that is referred to as "Machine Gun Steel" by virtue of its required use in FN's M249 and M240 weapons.   The hammer forging process work hardens the steel, making it more durable.  In addition, the chrome process for the bore allows for a lining almost twice as thick as a standard M16 for enhanced durability.  Chambered in 5.56 NATO, with a 1/7 twist, M4 barrel extension, and a rifle-length gas system.   The A2 profile barrel  is Mil-spec phosphate coated, High Pressure tested and Magnetic Particle inspected.  Barrel is finished off with an F-marked front sight post with sling swivel, standard handguards and an A2 flash hider.

Upper: Forged 7075-T6 A3 AR upper is hard coat anodized black for durability. Featuring T-marks, these upper upper receivers are made for us right here in the USA.

 Each upper is assembled to order with US-made parts, and test fired to check gas function.  Does not include bolt carrier group or charging handle.

 

 

SKU: 30796
SKU 30796
Brand Palmetto State Armory
Daily Deal N/A
Daily Deal Expires N/A
Youtube Video N/A
Free Shipping? N/A
SKU: 30796

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Reviews

4.9 / 5.0
9 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
8
1
0
0
0
Finally Got it!
I have been waiting for PSA to get this back in Stock. It seemed like every time I wanted to buy this upper it was not available. Very fast shipping. Going to use this upper for an A4 clone. I don't think you can go wrong. I used to give PSA a bad wrap for slow shipping etc. I can say PSA has stepped up their Customer service game and I am very impressed. I can assure you I'll be buying more.

If you are on the fence about this purchase just buy it. You won't regret it. don't sleep on this just do it! The way gun prices are it's a no brainier. The longer you wait the more chance you have of this upper no longer being in stock. It takes forever to get back in stock and when it does come available it usually sells out quick. I'm shocked they have it right now..
July 29, 2017
Just what the doctor ordered!
Excellent It is a dream to shoot. Handles 69gr and 75gr bullets. Match quality results at the range. What more can I say. Mounted a Burris Predator scope on it.
July 11, 2017
Nice rifle upper-20"
Been looking for a CHF 20" rifle upper for some time. Finally saw it in stock at PSA at a great price and ordered it slapped in a new PSA BCG and a 5 power optic and tried it out. Very accurate with a nice overall presentation and a quality fit and finish. I tried some underpowered budget ammo and ran a reduced power spring and it gobbled it up like nothing. You can overpay for the same thing from another company with a fancy boutique name and it won't be any better and would definately cost a lot more. PSA gets it done again.
February 22, 2017
psa 20" chf upper wo/bcg
great upper shoots very good group 1 inch at 100 yds with xm193 55gr lake city ammo cant complain one bitthe hand guards suck but but i was going to install knights armament m5 ras anyway what round hand guards are great anyway none of them.
October 6, 2016
Very good upper- update to my 5/30/16 review
This is a VERY good upper with only a bit of extra attention needed for perfect parts fitting/assembly. At my last review I have re-indexed the barrel nut for dead center alignment with the gas tube. Now wondering if I had over-torqued it I removed the barrel to re-lube the nut threads for proper torque. PSA had lubed the barrel nut threads but not mil-spec (MIL-G-21164D) AeroShell 33MS. This creates a small risk of corrosion/seizing. Also the front handguard was a bit loose at the FSB which is common and NOT a flaw. But I shimmed it anyway for a super-tight fit.

Value and Price ratings are now 5 stars. I feel that the extra cost of the CHF barrel it totally worth it.
June 30, 2016
Do it
Very pleased. Ringing 8" plate from first shot with Carry Handle at 100yds. Very impressed since then I've swapped Handguards and mounted a 3-9 now I'm 1.5" at 100yds consistently. Always a pleasure with PSA ...placing order and receiving promptly. Quality is A+++
June 6, 2016
Almost perfect
Received in on one week from date of order. Nice overall. Only flaw was an imperfectly indexed barrel nut. My barrel nut index was off by just a hair not giving the gas tube the tiny amount of free play that it needs to center itself on the gas key. There was however NO binding when I installed the excellent PSA Premium BCG. I indexed the nut myself rather than repackage-ship-wait.

It fit my Spike's lower with no looseness. Will update review after firing.
May 30, 2016
Great Shooter
I bought this as as practice upper for CMP Service Rifle Competition. It shoots every bit as good as my custom upper with a stainless match barrel. I put a PSA Nickel Boron Bolt carrier group in it and it has not had a single malfunction is over 500 rounds so far. It loves 69 grain bullets. If you are considering getting into Service Rifle competition and don't have a $1000 for a match upper this upper will do the job if you feed it good ammunition. You simply can't go wrong with this upper. Great job with this upper PSA. If you find this upper is available you better buy it fast! They sell out quick !
November 1, 2015
Very Pleased
These seem to be in stock only rarely and then for a very short time. I've been wanting to build an "A2" clone for awhile on my existing rifle lower with A2 stock (Spike's lower receiver with PSA A2 lower parts kit including stock). Added a PSA removable carry handle and premium BCG and put it all together. Looks great and feels great.

Took it to the range after setting the front and rear sights to "mechanical zero." It was on the 8" paper plate target from the first shot with the iron sights and only had to move the front sight post a few clicks for elevation. Windage was perfect at mechanical zero so I guess the FSB was lined up perfectly when assembled.

Very happy with the accuracy although it is not as good as my 20" free floated bull barrel scoped upper that I use on the same lower and I would never expect it to be.
August 7, 2015

Customers Who Viewed This Item Also Viewed