PSA 4" 9mm 1:10 M-Lok MOE Shockwave Pistol, Black

More Views

PSA 4" 9mm 1:10 M-Lok MOE Shockwave Pistol, Black

TEMPORARILY OUT OF STOCK

Quick Overview

free shipping Free Shipping applies to this item only and not the entire order.

Must be 21 or older to purchase.

If you live in California, please read this notice before ordering.

It is the customer's responsibility to be aware of all applicable laws and regulations regarding the purchase and ownership of uppers with a barrel length of less than 16". Federal NFA regulations are applicable to this item.

WARNING: This product can expose you to the chemical lead, which is known to the State of California to cause cancer and reproductive harm. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

SKU: 5165447607
UPC: 5165447607
MFR#: 5165447607

Barrel Length: 4"
Gas System: Blowback
Barrel Profile: Heavy
Barrel Steel: 4150V Chrome Moly Steel
Barrel Finish: Nitride
Chrome Lining: None
Muzzle Thread: 1/2-36
Chamber: 9mm (9x19)
Twist Rate: 1 in 10"
Barrel Extension: Blowback
Diameter at Gas Block: N/A
Gas Block Type: N/A
Muzzle Device: PSA Fluted 9mm Flash Can
Receiver Material: Forged 7075 T6
Receiver Type: M4
Handguard Type: PSA 6" Lightweight M-Lok 
Bolt Carrier Group Included: Yes
Bolt Steel: 8620
Bolt Carrier Profile: 9mm Hybrid
Charging Handle Included: Yes
Lower Receiver: Forged 7075 T6 Aluminum
Receiver Finish: Hardcoat Anodized
Fire Control Group: Single-Stage, Mil-spec style
Grip: Magpul, Black
Buffer Tube: 7075 T6 Aluminum 
Adjustment: Fixed
Pistol Brace: KAK Industries Pistol Stabilizing Blade, Black
Magazine: ETS Clear Magazine, 31 Round

Add To:

Barrel: 4" chrome moly steel barrel. Chambered in 9mm, (9x19), with a 1/10 twist. The barrel is nitride treated for durability and finished off with a Palmetto State Armory 6" Lightweight M-Lok free-float rail and a Palmetto State Armory Fluted 9mm Flash Can.

Flash Can: Palmetto State Armory's Fluted "FLASH CAN". This is a solid 6061 aluminum device that is designed to direct muzzle gases and the muzzle flash forward. Threaded 1/2-36 for 9mm.  Black military-style hard anodizing.   THIS DEVICE IS NOT DESIGNED TO REDUCE RECOIL, MUZZLE RISE, OR FLASH SIGNATURE. This device is designed to direct gasses and noise forward away from the shooter and enhance the weapon's appearance.

Upper: Forged 7075-T6 A3 AR upper is hard coat anodized black for durability.  These upper receivers are made for us right here in the USA.

Bolt Carrier Group: G-9 Hybrid 9mm BCG. Phosphate coated, 8620 steel, G-9 Hybrid Bolt allows use with either Glock®-style, or Colt®-style magazine, Palmetto State Armory lowers. Includes charging handle.

Lower:. Forged 7075 T6 aluminum and then hard coat anodized, these lowers are purpose built to accept 9mm Glock®-style magazines.   Designed to work with PSA's new 9mm Hybrid uppers.  The lower is assembled with a Palmetto State Armory MOE lower build kit with a Magpul Grip,  PSA pistol buffer tube, and KAK Industries Pistol Stabilizing Blade.  Does not include last round bolt hold open feature.

SKU: 5165447607
SKU 5165447607
Brand Palmetto State Armory
Daily Deal No
Daily Deal Expires No
Youtube Video No
Free Shipping? Yes
SKU: 5165447607

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 8 questions Browse 8 questions and 21 answers
what is the overall length of the weapon? From tip of buttstock to tip of barrel or mlok rail whichever comes last. thank you
john l on Jul 13, 2018
Could this weapon be modified for LRBHO with a part exchange? If so, what part/modification required?
Patriot_Son on Jul 15, 2018
Is it easy to get your fingers caught in those huge cut-outs in the top portion of that terriblely designed handguard?
Jmmmmmmmm on Jul 13, 2018
BEST ANSWER: Yes it is possible to get even my very large gorilla grip fingers cause in the cut outs occasionally
Can the Shockwave blade be replace by the SBA3?
V L on Jul 12, 2018
BEST ANSWER: Only by replacing the buffer tube. The SBA3 takes (and comes with) a standard milspec buffer tube which is adjustable. The kak tube isn't setup for the adjustable stocks.
Will it take Glock Mags?
SteveK on Jul 12, 2018
BEST ANSWER: Yes it will accept Glock 17, 18, 19, &34 mags for sure, I don’t know about Glock 26 because of its low capacity, it may be too short to lock in place
I have an Osprey 45 suppressor. What are the inner dimensions of the handguard, and will my osprey fit inside the handguard to thread on?
Andrew W on Apr 29, 2018
BEST ANSWER: I have an Omega 45k and it fits very snug. The Osprey 45 has the offset so i do not think it will fit. The flash can that it comes with is 1.2 inch diameter and my Omega 45k has 1.45 inch diameter and barely fits. Good luck.
The KAK buffer tube allows the brace to be fixed at several pre-set positions. Does the PSA tube allow the same adjustments?
Paul W on Jul 21, 2018
Is the PSA AR 9mm capable of firing +P ammo ?
Jeff S on Jul 14, 2018

Reviews

5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Great Buy!
Great gun. Can’t beat the value and versatility of PSA firearm!
August 14, 2018
Purchased
1 month ago
Great gun, very happy with price and quality
July 12, 2018
Purchased
5 months ago
Fine shooter
Purchased one of these to have a platform that would cross-over with my pistol magazines. I have shot 500+ rounds through it and it has performed flawlessly. No malfunctions of any kind. Have ran mostly CCI, B&S, and rem UMC 115gr. The barrel length is a little short, and can effect front grip of firearm. I knew this with purchase and wanted a smaller platform for a backpack style gun. Great purchase like usual from PSA.

Please note this item clearly states it doesn't have a last round hold open option.
May 1, 2018

Customers Who Viewed This Item Also Viewed