PSA 7.5" Pistol-Length 300AAC Blackout Phosphate 1/8 2A Armament 7" M-Lok MOE Shockwave Pistol - 5165447855

More Views

PSA 7.5" Pistol-Length 300AAC Blackout Phosphate 1/8 2A Armament 7" M-Lok MOE Shockwave Pistol - 5165447855

TEMPORARILY OUT OF STOCK

Quick Overview

Must be 21 or older to purchase.

If you live in California, please read this notice before ordering.

It is the customer's responsibility to be aware of all applicable laws and regulations regarding the purchase and ownership of uppers with a barrel length of less than 16". Federal NFA regulations are applicable to this item.

WARNING: This product can expose you to the chemical lead, which is known to the State of California to cause cancer and reproductive harm. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

SKU: 5165447855
UPC: 5165447855
MFR#: 5165447855

Barrel Length: 7.5"
Gas System: Pistol-length
Barrel Profile: Heavy
Barrel Steel: 4150V Chrome Moly Steel
Barrel Finish: Phosphate
Chrome Lining: None
Muzzle Thread: 5/8-24
Chamber: 300AAC Blackout
Twist Rate: 1 in 8"
Barrel Extension: M4
Diameter at Gas Block: .750"
Gas Block Type: Low-profile
Muzzle Device: A2 Style Flash Hider
Receiver Material: Forged 7075 T6
Receiver Type: M4
Handguard Type: 2A Armament 7" M-Lok Free Float
Bolt Carrier Group Included: Yes
Bolt Steel: Carpenter 158
Bolt Carrier Profile: Full-auto
Charging Handle Included: Yes
Lower Receiver: Forged 7075 T6 Aluminum
Receiver Finish: Hardcoat Anodized
Fire Control Group: Single-Stage, Mil-spec style
Grip: Magpul Grip, Black
Buffer Tube: KAK Industries Shockwave Pistol Buffer Tube
Adjustment: Fixed
Pistol Brace: KAK Industries Shockwave Blade, Black
Magazine: 30 Round Aluminum

Add To:

Barrel: 7.5" 4150V chrome moly steel. Chambered in 300AAC Blackout, with a 1:7 twist rate, M4 barrel extension, and a pistol-length gas system.  Phosphate heavy profile barrel is finished off with a 2A Armament 7" M-Lok free-float rail, .750" low-profile gas block, and A2 style flash hider.

Upper: Forged 7075-T6 A3 AR upper is machined to MIL-SPECS and hard coat anodized. Uppers include forward assist and dust cover. These uppers are made for us right here in the USA by a mil-spec manufacturer.

Bolt: Full-auto profile bolt carrier group. Shot-peened, mil-spec Carpenter No. 158® steel bolt. Gas Key Hardened to USGI Specifications, Fastened with Grade 8 screws, and Staked Per Mil-Spec. 8620 steel M-16 profile carrier is chrome lined and phosphate coated.

Lower: These forged lowers are quality made using 7075-T6 aluminum and are marked "MULTI" for the caliber.  Fitted with a KAK Industries Shockwave Blade and Magpul Grip. 

SKU: 5165447855
SKU 5165447855
Brand Palmetto State Armory
Daily Deal No
Daily Deal Expires No
Youtube Video No
Free Shipping? No
Free Shipping Qty Label N/A
Free Shipping Qty N/A
SKU: 5165447855

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 4 questions Browse 4 questions and 6 answers
Hello, what is the overall length of the pistol?
Norman B on Jul 2, 2018
Do you have similar in semiautomatic NATO round?
Jay G on Apr 20, 2018
BEST ANSWER: Semi-automatic is not an ammo type.
What attachment can I put on the bottom of the forearm to attach a flashlight laser?
Frederick E on Jan 14, 2019
BEST ANSWER: Magpul makes lots of attachments that work with the M-Lok rail, palmetto has them under accessories I believe.
What is the I.D. Of the handguard?
AUSTIN on Jul 22, 2018
BEST ANSWER: Looks like the description says 2A Arment. I own one and it is a solid piece.

Reviews

4.7 / 5.0
15 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
11
3
1
0
0
One of my favorites to shoot
Having a blast with this thing. I’ve ran about 300 rds with no issues
User submitted image
Added Sep 21, 2018
September 21, 2018
Purchased
11 months ago
Pretty well built
Great little piece. I would give it 5 stars, but 2 of the screws for the handguard immediately stripped and I was unable to get replacements from 2a armament or PSA. I had to go to hardware store and get my own replacements as well as use a tool to pull the stripped screws.

You need to take off the handguard to replace the flashhider.
I've only ran about 500-1k rounds through it but I've had no problems. I've ran tons of different ammo with no problems yet. I haven't even cleaned it yet. Suppresses quite nicely, but be careful because its hard to get a can on the barrel with the length of the handguards. Direct thread is kinda okay, but I don't see it working with any suppressors which require a QD or flashhider mounted type of mount. You would need to shave down the handguards or replace them.
Pretty accurate for the length of the barrel and the shockwave blade is more comfortable than I thought it'd be.

TLDR: Nicely built minus the handguard screws, direc thread cans okay, other mounts not without modification, no issues with ~1k rounds.
August 29, 2018
Purchased
11 months ago
Love it
Love it PSA! Making quality guns at super great prices!
Love it PSA. Making quality guns at  super great prices!
Love it PSA. Making quality guns at super great prices!
August 17, 2018
Purchased
11 months ago
Great
Great truck gun for pigs and coyotes.
Love it! Have since put a scope and silencer on it
Love it! Have since put a scope and silencer on it
August 12, 2018
Purchased
11 months ago
Awesomeness
Got it and shot it and Totally Love it...Awesomeness is the only way to say it...Will be buying more from PSA...Thank you
August 7, 2018
Purchased
11 months ago
Nice
Only shot 120 rounds through it so far. I like it. Accurate at 75 yards. I put a Sig Saur red dot sight on. Very little recoil I did not notice the difference from the AR-15. Hand guard gets warm but not hot. Only issue is with the butt of the gun, it’s not real comfortable. The way I held it, it dug in and caused some soreness and bruising. Ill have to use some padding or my vest. Otherwise I’m very happy with the purchase.
August 6, 2018
Purchased
11 months ago
Response from Palmetto State Armory
Thank you for rating and commenting on our product. I apologize for the discomfort caused by the pistol brace on your AR Pistol. For legality, the brace is not intended to be positioned to your shoulder. Unless you have an SBR tax stamp for your Pistol, I would highly advise you to refer to the ATF guidelines prior to altering your pistol brace. I have included a link below for you that may be of some help. https://www.atf.gov/file/11816/download
August 6, 2018
David M
Bang for Buck Choice
Only .3 oz heavier than the lightest .300 Blackout Pistol I've found so far on the market, but 3/4 cheaper. Bang for Buck value High on this purchase.

Came with a 5.56 magazine, that didn't match picture, I gave it away to someone with a 5.56. Hence the 4 stars, have to buy my own 300 magazine, but it should have come with one instead of being lazy and throwing in a 5.56 instead of 300--even if it was a junk pmag one with the rattle, at least it would be a 300.

A little hard to get to the muzzle brake to remove, but that's ok.

Trigger is nice, might just keep it.

Buffer tube sleeve (Shockwave) is a little sharp on the back end, but plan on fixing that with a little d3o or something similar. Also, it is cracked, obviously lower quality. Not sure if I trust putting a sling on because of this.

Love the storage in the grip.

Charging handle acceptable, but I'll probably replace it.
August 5, 2018
Purchased
11 months ago
Response from Palmetto State Armory
Since the .300 Blackout utilizes a modified .223 Remington shell casing, a 5.56NATO magazine will accept and properly feed the .300 Blackout cartridge.
August 6, 2018
Casey S
I really like your product! Probably buy another one soon... Putting a binary trigger on the one I got
August 4, 2018
Purchased
11 months ago
Awesome piustol
Shipped and received quickly. I mounted a Sig Romeo 5x Red Dot. This is probably my favorite weapon to shoot now! It is very lighweight and accurate with the new 190 gr Hornandy Subsonic bullets.I highly recommend PSA and this weapon in particular. I also bought a 224 Valkyrie upper from PSA but haven't had a chance to try it yet.
User submitted image
Added Jul 28, 2018
July 28, 2018
Purchased
1 year ago
Disappointed
I purchased one of these 7/2/18 and it was delivered 7/13/18. Looked great but I noticed that the BCG was very hard to pull out of battery, actually being very tight. But this isn't my first gun so I thought it might perform OK during firing. I got a chance to fire it yesterday, 7/26/18, and the first 4 rounds went great. After that, I had to charge every round, then on the tenth round it jammed in battery so hard that I had to use the handle of a rubber handled hammer to drive it out while holding the charging handle catch. Just to try it, I replaced the BCG with a nickel boron one from a PSA competitor. It performed perfectly for the next 30 rounds when I stopped for the day. I now have a PSA BCG that may be defective and have used a nickel boron BCG that I was saving for a gift for my son. The upside, the gun now performs flawlessly.
July 27, 2018
Response from Palmetto State Armory
We do apologize for that. Since all of our parts and firearms are covered by our Unlimited Lifetime Warranty, if you have any issues arise from the craftsmanship of the product, we can either have select parts sent to you for you to replace, or we can have the item brought in, at no cost to you, so we can repair or replace the defective product. Please contact Customer Service so we may resolve this issue.
July 27, 2018
Casey S

Customers Who Viewed This Item Also Viewed