PSA AK-P GF3 Classic Triangle Side Folding Pistol & BLEM PSA Dagger Compact 9mm Pistol
local_shipping FREE SHIPPING
PSA AK-P GF3 Classic Triangle Side Folding Pistol, Black
- Caliber: 7.62x39
- Barrel Length: 10.5"
- Barrel Twist Rate: 1:9.5
- Barrel Material: 4150 Steel
- Barrel Finish: Gas Nitride
- Muzzle Device: Mini Krink Brake
- Muzzle Thread: M24x1 1/2 RH
- Receiver: Stamped Steel
- Front Trunnion: Hammer Forged
- Bolt: Hammer Forged
- Carrier: Hammer Forged
- Handguard Type: Classic Upper/Lower Handguard, Black
- Grip: Classic AK Grip, Black
- Brace: PSA AK Picatinny Stock Adapter with Triangle Side Folding Brace
- Fire Control Group: Single Stage, Single Hook
- Sights: 90 Degree Combo Sight/Gas Block, Fixed Rear Sight
- Magazine: 30 Round Magazine (1); Where Allowed by Law
- Includes: Picatinny Optics Mount
- AKP w/ Triangle Brace Extended: 29 5/8”
- AKP w/ Triangle Brace Folded: 21 1/8”
- Cleaning Rod Not Included
The PSA AK-P GF3 is designed from the ground up to be a new standard in AK-47 pistols, utilizing all new precision manufactured parts. Thoroughly tested in development, we tortured tested to 10,000 rounds to ensure a quality product. Not to be satisfied with just a good AK-47, we kept improving and now are proud to announce our PSA AK-P Gen3 Hammer Forged (GF3) pistol with a hammer forged bolt, carrier, and front trunnion.
The 4150 barrel is nitride treated for accuracy and durability and is pressed into a new hammer forged front trunnion to ensure the longevity AK-47s are known for. The hardened steel 1mm receiver features a mil-spec style single hook trigger, and side rail mount. The front trunnion and bolt carrier are engraved with GF3 to designate the GF3 hammer-forged model. The pistol is finished with classic polymer handguards, Triangle Side Folding Brace, and a classic AK grip; Pistol ships with 30 round magazine (where allowed by law).
Picatinny Top Railed, Hinged Dust Cover
The top Picatinny railed dust cover was designed so most common low mount red dot optics will co-witness with the front and rear sight. High mount red dot optics will not co-witness with the AK-P sights. Please see pictures below: (Optics shown on pictures is for references only; not included). The Picatinny dust cover has a flare on the right side designed to stop the safety selector from riding above the dust cover.
PSA AK Picatinny Stock Adapter with Triangle Side Folding Brace
The PSA AK Picatinny Stock Adapter replaces the M4 stock adapter found in other PSA AK pistol models and allows for the Side Folding Brace to be securely attached to the rear of the firearm, giving it a unique look that is sure to impress. The Triangle Side Folding Brace is left side-folding and compatible with all platforms utilizing a PSA AK Picatinny Stock/Brace Adapter.
- 10.5" Gas Nitride 4150 steel treated barrel
- Stamped steel receiver
- Hammer Forged Front Trunnion
- Hammer Forged Bolt
- Hammer Forged Carrier
- Picatinny Optics Mount
- 7.62x39 Caliber
- 1 in 9.5" Twist
- Fixed Rear Sight
- Mini Krink Brake Muzzle Device
- 90 Degree Combo Sight/Gas Block
- Fire Control Group: Single Stage, Single Hook
- Classic Polymer Upper/Lower Handguard, Black
- Classic AK-47 Polymer Grip, Black
- PSA AK Picatinny Stock Adapter with Triangle Side Folding Brace
- 30 round magazine (1); Where allowed by law
Pistols must be shipped to a valid, current Federal Firearms Licensee (FFL). Please have the shipping address of your preferred FFL before placing your order. You will need the FFL information to complete the order. It is the purchaser's responsibility to be aware of the laws in their state regarding high capacity sporting pistols.
BLEM PSA Dagger Compact 9mm RMR Pistol with Threaded Barrel, Black DLC
Model: Palmetto Dagger Compact
Action: Striker Fired
Weight: 22.4oz (unloaded)
Overall Length: 7.15"
Overall Width: 1.28"
Overall Height: 4.78" (Without Mag)
Barrel Length: 3.9"
Barrel Material: Stainless Steel
Barrel Finish: DLC Coating
Twist Rate: SAAMI Spec 1:10
Slide Material: Stainless Steel
Slide Finish: Black DLC Coating
Front Sight: Ameriglo Lower 1/3 Co-Witness (Not a Night Sight)
Rear Sight: Ameriglo Lower 1/3 Co-Witness (Not a Night Sight)
Safety: Striker Block Safety & Trigger Safety
Magazine: Comes with One (1) 15rd Magazine
Optics Mount: RMR Pattern
** These pistols will have cosmetic blemishes that do not affect function. This may include, but is not limited to, forging marks under the finish, scratches, and slight variation in the finish color coat.
A compact-sized polymer-framed pistol, the Palmetto Dagger with Extreme Carry Cuts™ introduces game-changing ergonomics and controllability. Made from high-quality stainless steel and advanced polymers, this pistol lives up to today's highest expectations while maintaining the unmatched Palmetto State Armory value. Chambered in 9x19mm, the Palmetto Dagger is fed from a supplied PMAG® 15 GL9™ (15-Round) magazine and operated by a smooth single-action striker-fired trigger mechanism. The Palmetto Dagger is feature-rich even in its standard form, yet also provides a framework for further customization, as it is highly compatible with many aftermarket offerings. The new Extreme Carry Cuts™ offer smoother edges to the rear and front of the slide to help with faster drawing without snagging the user's holster. The slide is also finished with a Black DLC coating and RMR footprint for compatibility with RMR-style reflex sights. A black cover plate is also included.
Ships in Palmetto State Armory Soft Pistol Case.
Ergonomic Grip Shape
RMR Pattern Optics Mount
Extreme Carry Cuts™ on Slide
Aggressive Grip Texturing
Flat Faced Trigger
Striker Block Safety and Trigger Safety
Ameriglo Lower 1/3 Co-Witness Sights (These are not night sights)
Stainless Steel Recoil Spring Guide Rod
Black DLC Coated Slide
DLC Coated Barrel
PSA Dagger Soft Pistol Case
These items are controlled by the U.S. Government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.