Due to Measure 114, Oregon State Magazine & Firearm Orders that are shipped by Palmetto State Armory will be prioritized for shipment.

In stock
PSA AK-P GF3 MOE SBA3 Pistol & BLEM PSA Dagger Compact 9mm Pistol

PSA AK-P GF3 MOE SBA3 Pistol & BLEM PSA Dagger Compact 9mm Pistol

SAVE $300.00 When you add both!
Regular Price $1,199.99 Special Price $899.99
Customers must read Compliance Information before purchasing.

Products Details

PSA AK-P GF3 MOE SBA3 Pistol, Gray

DETAILS

  • Caliber: 7.62x39
  • Barrel Length: 10.5"
  • Barrel Twist Rate: 1:9.5
  • Barrel Material: 4150 Steel
  • Barrel Finish: Gas Nitride
  • Muzzle Device: Mini Krink Brake
  • Muzzle Thread: M24x1 1/2 RH 
  • Receiver: Stamped Steel 
  • Front Trunnion: Hammer Forged 
  • Bolt: Hammer Forged 
  • Carrier: Hammer Forged 
  • Handguard Type: Magpul MOE AKM Handguard, Gray
  • Grip: Magpul MOE AK Grip, Gray
  • Brace: M4 Stock Adapter with SBA3 Adjustable Brace, Gray
  • Fire Control Group: Single Stage, Single Hook
  • Sights: 90 Degree Combo Sight/Gas Block, Fixed Rear Sight
  • Magazine: 30 Round Magazine (1); Where Allowed by Law
  • Includes: Picatinny Optics Mount 
  • Cleaning Rod Not Included

FEATURES

The PSA AK-P GF3 is designed from the ground up to be a new standard in AK-47 pistols, utilizing all new precision manufactured parts.  Thoroughly tested in development, we tortured tested to 10,000 rounds to ensure a quality product.  Not to be satisfied with just a good AK-47, we kept improving and now are proud to announce our PSA AK-P Gen3 Hammer Forged (GF3) pistol with a hammer forged bolt, carrier, and front trunnion.

The 4150 barrel is nitride treated for accuracy and durability and is pressed into a new hammer forged front trunnion to ensure the longevity AK-47s are known for.  The hardened steel 1mm receiver features a mil-spec style single hook trigger, and side rail mount.  The front trunnion and bolt carrier are engraved with GF3 to designate the GF3 hammer forged model.  The pistol is finished with a Magpul polymer handguard, SB Tactical SBA3 Pistol Brace, and Magpul AK-47 polymer grip; Pistol ships with 30 round magazine (where allowed by law).

Picatinny Top Railed, Hinged Dust Cover

The top Picatinny railed dust cover was designed so most common low mount red dot optics will co-witness with the front and rear sight. High mount red dot optics will not co-witness with the AK-P sights. Please see pictures below: (Optics shown on pictures is for references only; not included).  The Picatinny dust cover has a flare on the right side designed to stop the safety selector from riding above the dust cover. 

M4 Stock Adapter With SBA3 Adjustable Brace (Included With This Model)

The included M4 adapter with SBA3 can be removed and replaced with the soon to be released triangle side folding brace and mounting mechanism. They are designed to be interchangeable. We will be selling the M4 with SBA3 assembly and the Triangle with mounting device separately to be used on other firearms in the coming months. We will have the triangle side-folder brace/ mounting mechanism model in about 2-3 months.

  • 10.5" Gas Nitride 4150 steel treated barrel
  • Stamped steel receiver
  • Hammer Forged Front Trunnion
  • Hammer Forged Bolt
  • Hammer Forged Carrier
  • Picatinny Optics Mount 
  • 7.62x39 Caliber
  • 1 in 9.5" Twist
  • Fixed Rear Sight
  • Mini Krink Brake Muzzle Device
  • 90 Degree Combo Sight/Gas Block
  • Fire Control Group: Single Stage, Single Hook
  • Magpul Polymer Upper/Lower Handguard, Gray
  • Magpul AK-47 Polymer Grip, Gray
  • M4 Stock Adapter With SBA3 Adjustable Brace, Gray
  • 30 round magazine (1); Where allowed by law

Pistols must be shipped to a valid, current Federal Firearms Licensee (FFL).  Please have the shipping address of your preferred FFL before placing your order.  You will need the FFL information to complete the order.  It is the purchaser's responsibility to be aware of the laws in their state regarding high capacity sporting pistols.

Blem PSA Dagger Compact 9mm RMR Pistol With Threaded Barrel, Gray

DETAILS

Model: Palmetto Dagger Compact

Caliber: 9mm

Action: Striker Fired

Weight: 22.4oz (unloaded)

Overall Length: 7.65"

Overall Width: 1.28"

Overall Height: 4.78" (Without Mag)

Barrel Profile: Threaded with Thread Protector

Barrel Length: 4.5"

Barrel Material: Stainless Steel

Barrel Finish: DLC Coating

Thread Pitch: 1x2x28 TPI

Twist Rate: SAAMI Spec 1:10

Slide Material: Stainless Steel

Slide Finish: Cerakote, Gray

Frame: Polymer, Gray

Front Sight: Ameriglo Serrated Lower 1/3 Co-Witness, Black (Not a Night Sight)

Rear Sight: Ameriglo Lower 1/3 Co-Witness, Black (Not a Night Sight)

Safety: Striker Block Safety & Trigger Safety

Magazine: Comes with One (1) 15rd Magazine

Optics Mount: RMR Pattern

**These pistols will have cosmetic blemishes that do not affect function. This may include, but is not limited to, machining marks under the finish, scratches, or variations in the finish color.

FEATURES

A compact-sized polymer-framed pistol, the Palmetto Dagger with Extreme Carry Cuts™ introduces game-changing ergonomics and controllability. Made from high-quality stainless steel and advanced polymers, this pistol lives up to today's highest expectations while maintaining the unmatched Palmetto State Armory value. Chambered in 9x19mm, the Palmetto Dagger is fed from a supplied PMAG® 15 GL9™ (15-Round) magazine and operated by a smooth single-action striker-fired trigger mechanism. The Palmetto Dagger is feature-rich even in its standard form, yet also provides a framework for further customization, as it is highly compatible with many aftermarket offerings. The new Extreme Carry Cuts™ offer smoother edges to the rear and front of the slide to help with faster drawing without snagging the user's holster. The slide is also finished with a Gray Cerakote Slide coating and RMR footprint for compatibility with RMR style reflex sights. A Cover plate is also included. 

Ships in Palmetto State Armory Soft Pistol Case. 

Additional Features:

Ergonomic Grip Shape

RMR Pattern Optics Mount

Extreme Carry Cuts™ on Slide

Aggressive Grip Texturing

Striker Fired

Flat Faced Trigger

Striker Block Safety and Trigger Safety

Ameriglo Lower 1/3 Co-Witness Sights, Black Serrated Standard Sights (These are not night sights)

Stainless Steel Recoil Spring Guide Rod

Gray Cerakote Slide 

Gray Polymer Frame

DLC Coated Barrel

15rd Magazine

PSA Dagger Soft Pistol Case

Compliance

All NFA Rules Apply.
These items are controlled by the U.S. Government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Loading...