In stock
PSA AK-P GF3 MOE SBA3 Pistol with JL Billet Rail & PSA Dagger Compact 9mm Pistol

PSA AK-P GF3 MOE SBA3 Pistol with JL Billet Rail & PSA Dagger Compact 9mm Pistol

SAVE $300.00 When you add both!
Regular Price $1,249.99 Special Price $949.99
Customers must read Compliance Information before purchasing.

Products Details

PSA AK-P GF3 MOE SBA3 Pistol with JL Billet Rail, Black

DETAILS

PSA AK-P Railed MOE SBA3 Pistol, Black

Caliber: 7.62x39
Barrel Length: 10.5"
Barrel Twist Rate: 1:9.5
Barrel Material: 4150 Steel
Barrel Finish: Gas Nitride
Muzzle Device: Mini Krink Brake
Muzzle Thread: M24x1 1/2 RH 
Receiver: Stamped Steel 
Front Trunnion: Hammer Forged 
Bolt: Hammer Forged 
Carrier: Hammer Forged 
Handguard Type: Enhanced Aluminum M-Lok Upper/Lower Handguard with Picatinny Top Rail
Grip: Magpul MOE AK Grip, Black
Brace: M4 Stock Adapter with SBA3 Adjustable Brace
Fire Control Group: Single Stage, Single Hook
Sights: 90 Degree Combo Sight/Gas Block, Fixed Rear Sight
Magazine: 30 Round Magazine (1); Where Allowed by Law
Includes: Picatinny Optics Mount 

Cleaning Rod Not Included

FEATURES

The PSA AK-P GF3 is designed from the ground up to be a new standard in AK-47 pistols, utilizing all new precision manufactured parts.  Thoroughly tested in development, we tortured tested to 10,000 rounds to ensure a quality product.  Not to be satisfied with just a good AK-47, we kept improving and now are proud to announce our PSA AK-P Gen3 Hammer Forged (GF3) pistol with a hammer forged bolt, carrier, and front trunnion.

The 4150 barrel is nitride treated for accuracy and durability and is pressed into a new hammer forged front trunnion to ensure the longevity AK-47s are known for.  The hardened steel 1mm receiver features a mil-spec style single hook trigger, and side rail mount.  The front trunnion and bolt carrier are engraved with GF3 to designate the GF3 hammer forged model.  The pistol is finished with an Aluminum M-Lok Upper/Lower Handguard with Picatinny Top Rail, SB Tactical SBA3 Pistol Brace, and AK-47 polymer grip; Pistol ships with 30 round magazine (where allowed by law).

Picatinny Top Railed, Hinged Dust Cover

The top Picatinny railed dust cover was designed so most common low mount red dot optics will co-witness with the front and rear sight. High mount red dot optics will not co-witness with the AK-P sights. Please see pictures below: (Optics shown on pictures is for references only; not included).  The Picatinny dust cover has a flare on the right side designed to stop the safety selector from riding above the dust cover. 

M4 Stock Adapter With SBA3 Adjustable Brace (Included With This Model)

The included M4 adapter with SBA3 can be removed and replaced with the soon to be released triangle side folding brace and mounting mechanism. They are designed to be interchangeable. We will be selling the M4 with SBA3 assembly and the Triangle with mounting device separately to be used on other firearms in the coming months. We will have the triangle side-folder brace/ mounting mechanism model in about 2-3 months.

  • 10.5" Gas Nitride 4150 steel treated barrel
  • Stamped steel receiver
  • Hammer Forged Front Trunnion
  • Hammer Forged Bolt
  • Hammer Forged Carrier
  • Picatinny Optics Mount 
  • 7.62x39 Caliber
  • 1 in 9.5" Twist
  • Fixed Rear Sight
  • Mini Krink Brake Muzzle Device
  • 90 Degree Combo Sight/Gas Block
  • Fire Control Group: Single Stage, Single Hook
  • Enhanced Aluminum M-Lok Upper/Lower Handguard with Picatinny Top Rail
  • Magpul AK-47 Polymer Grip, Black
  • M4 Stock Adapter With SBA3 Adjustable Brace
  • 30 round magazine (1); Where allowed by law

Pistols must be shipped to a valid, current Federal Firearms Licensee (FFL).  Please have the shipping address of your preferred FFL before placing your order.  You will need the FFL information to complete the order.  It is the purchaser's responsibility to be aware of the laws in their state regarding high capacity sporting pistols.

PSA Dagger Compact 9mm Pistol with Extreme Carry Cuts, Black DLC

DETAILS

Model: Palmetto Dagger Compact

Caliber: 9mm

Action: Striker Fired

Weight: 22.4oz (unloaded)

Overall Length: 7.15"

Overall Width: 1.28"

Overall Height: 4.78" (Without Mag)

Barrel Length: 3.9"

Barrel Material: Stainless Steel

Barrel Finish: DLC Coating

Twist Rate: SAAMI Spec 1:10

Slide Material: Stainless Steel

Slide Finish: DLC Coating

Frame: Polymer

Front Sight: Steel - White Dot

Rear Sight: Steel - White Two Dot

Safety: Striker Block Safety & Trigger Safety

Magazine: Comes with One (1) 15rd Magazine

FEATURES

A compact-sized polymer-framed pistol, the Palmetto Dagger with Carry Cuts™ introduces game-changing ergonomics and controllability. Made from high-quality stainless steel and advanced polymers, this pistol lives up to today's highest expectations while maintaining the unmatched Palmetto State Armory value. Chambered in 9x19mm, the Palmetto Dagger is fed from a supplied PMAG® 15 GL9™ (15-Round) magazine and operated by a smooth single-action striker-fired trigger mechanism. The Palmetto Dagger is feature-rich even in its standard form, yet also provides a framework for further customization, as it is highly compatible with many aftermarket offerings. The new Carry Cuts™ offer smoother edges to the rear and front of the slide to help with faster drawing without snagging the user's holster. The slide is also finished with a DLC coating. 

Additional Features:

Ergonomic Grip Shape

Carry Cuts™ on Slide

Aggressive Grip Texturing

Striker Fired

Flat Faced Trigger

Striker Block Safety and Trigger Safety

Steel Sights - 3 Dot

Stainless Steel Recoil Spring Guide Rod

DLC Coated Slide

DLC Coated Barrel

15rd Magazine

Compliance

All NFA Rules Apply.
These items are controlled by the U.S. Government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Loading...