PSA AK-P MOE SBA3 Pistol, Gray - 5165458004

More Views

PSA AK-P MOE SBA3 Pistol, Gray - 5165458004

TEMPORARILY OUT OF STOCK

Quick Overview

free shipping Free Shipping applies to this item only and not the entire order.

Must be 21 or older to purchase.

If you live in California, please read this notice before ordering.

It is the customer's responsibility to be aware of all applicable laws and regulations regarding the purchase and ownership of uppers with a barrel length of less than 16". Federal NFA regulations are applicable to this item.

Not For Sale for Residents of Michigan

WARNING: This product can expose you to the chemical lead, which is known to the State of California to cause cancer and reproductive harm. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

SKU: 5165458004
UPC: 5165458004
MFR#: 5165450735
  • Caliber: 7.62x39
  • Barrel Length: 10.5"
  • Barrel Twist Rate: 1:9.5
  • Barrel Material: 4150 Steel
  • Barrel Finish: Gas Nitride
  • Muzzle Device: Mini Krink Brake
  • Muzzle Thread: M24x1 1/2 RH 
  • Receiver: Stamped Steel 
  • Front Trunnion: Hammer Forged 
  • Bolt: Hammer Forged 
  • Carrier: Hammer Forged 
  • Handguard Type: Magpul MOE AKM Handguard, Gray
  • Grip: Magpul MOE AK Grip, Gray
  • Brace: M4 Stock Adapter with SBA3 Adjustable Brace, Gray
  • Fire Control Group: Single Stage, Single Hook
  • Sights: 90 Degree Combo Sight/Gas Block, Fixed Rear Sight
  • Magazine: Magpul PMAG AK/AKM 30 Round Magazine (1); Where Allowed by Law
  • Includes: Picatinny Optics Mount 
  • Cleaning Rod Not Included

Add To:

The PSA AK-P GF3 is designed from the ground up to be a new standard in AK-47 pistols, utilizing all new precision manufactured parts.  Thoroughly tested in development, we tortured tested to 10,000 rounds to ensure a quality product.  Not to be satisfied with just a good AK-47, we kept improving and now are proud to announce our PSA AK-P Gen3 Hammer Forged (GF3) pistol with a hammer forged bolt, carrier, and front trunnion.

The 4150 barrel is nitride treated for accuracy and durability and is pressed into a new hammer forged front trunnion to ensure the longevity AK-47s are known for.  The hardened steel 1mm receiver features a mil-spec style single hook trigger, and side rail mount.  The front trunnion and bolt carrier are engraved with GF3 to designate the GF3 hammer forged model.  The pistol is finished with a Magpul polymer handguard, SB Tactical SBA3 Pistol Brace, and Magpul AK-47 polymer grip; Rifle ships with 30 round Magpul magazine (where allowed by law).

Picatinny Top Railed, Hinged Dust Cover

The top Picatinny railed dust cover was designed so most common low mount red dot optics will co-witness with the front and rear sight. High mount red dot optics will not co-witness with the AK-P sights. Please see pictures below: (Optics shown on pictures is for references only; not included).  The Picatinny dust cover has a flare on the right side designed to stop the safety selector from riding above the dust cover. 

M4 Stock Adapter With SBA3 Adjustable Brace (Included With This Model)

The included M4 adapter with SBA3 can be removed and replaced with the soon to be released triangle side folding brace and mounting mechanism. They are designed to be interchangeable. We will be selling the M4 with SBA3 assembly and the Triangle with mounting device separately to be used on other firearms in the coming months. We will have the triangle side-folder brace/ mounting mechanism model in about 2-3 months.

  • 10.5" Gas Nitride 4150 steel treated barrel
  • Stamped steel receiver
  • Hammer Forged Front Trunnion
  • Hammer Forged Bolt
  • Hammer Forged Carrier
  • Picatinny Optics Mount 
  • 7.62x39 Caliber
  • 1 in 9.5" Twist
  • Fixed Rear Sight
  • Mini Krink Brake Muzzle Device
  • 90 Degree Combo Sight/Gas Block
  • Fire Control Group: Single Stage, Single Hook
  • Magpul Polymer Upper/Lower Handguard, Gray
  • Magpul AK-47 Polymer Grip, Gray
  • M4 Stock Adapter With SBA3 Adjustable Brace, Gray
  • Magpul 30 round magazine (1); Where allowed by law

Pistols must be shipped to a valid, current Federal Firearms Licensee (FFL).  Please have the shipping address of your preferred FFL before placing your order.  You will need the FFL information to complete the order.  It is the purchaser's responsibility to be aware of the laws in their state regarding high capacity sporting pistols.

SKU: 5165458004
SKU 5165458004
Brand Palmetto State Armory
Daily Deal No
Daily Deal Expires No
Youtube Video 50pjkpaEKv0
Free Shipping? Yes
Free Shipping Qty Label No
Free Shipping Qty No
SKU: 5165458004

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 8 questions Browse 8 questions and 5 answers
Is the threads in the barrel concentric to the bore? Interested in mounting a supressor...
John R on May 14, 2019
BEST ANSWER: You may mount a suppressor.
Why can’t people of Michigan buy this?
Themanpile on Jun 2, 2019
BEST ANSWER: Because they measure over 29". From what I understand Michigan has a law that states a pistol cannot exceed 29" in length.
Is the M4 stock adapter removable? And does it have regular fixed stock trunnion? Interested in adding fixed stock for SBR
Shane on May 24, 2019
BEST ANSWER: the castle nut is stalked to fix it to the buffer tube. You could easily undo it, and yes it has a normal rear trunnuion, save for PSA's "puzzle peice" tang but functions the same.
does it fit psa ak?
Eric B on Jun 11, 2019
PSA AK-P MOE SBA3 Pistol, Gray - 5165458004
PSA AK-P MOE SBA3 Pistol, Gray - 5165458004
PSAK-47 GF3 Forged
PSAK-47 GF3 Forged "MOEkov" Rifle, OD Green (No Cleaning Rod) - 5165450210
Troy AK47 BattleRail (Top), BLK – SRAI-AK1-T0BT-00
Troy AK47 BattleRail (Top), BLK – SRAI-AK1-T0BT-00
Will you about able to ship this pistol to my Maryland FFL ?
Mikeymike on Jun 6, 2019
Can I purchase that dust cover for my psak-47 gf3?
Butch on Jun 22, 2019
BEST ANSWER: I don't think so because the AK P has a hinged set up at the front of the cover and the AK GF3 does not.
Are the thread concentric to bore and what sized piston does this use? Is there a KNS piston that would fit?
Bradley W on Jun 21, 2019
BEST ANSWER: I was wondering the same thing. KNS does not make a piston for this and they requested measurements for the piston. I was thinking about sending mine into them. Get the Dead Air Wolverine and it will be more forgiving if the threads are off. PSA has stated that the threads SHOULD be concentric but you will need a rod to verify.
what musle energy and velocity it can produce with standard FMJ ammo?
Marco G on Jul 4, 2019

Reviews

There are no reviews for this item. Write Review

Customers Who Viewed This Item Also Viewed