AR-15 Upper Receiver 16 Inch Carbine Length With Bolt Carrier Group

More Views

PSA AR47 16" Carbine-Length 7.62x39mm 1:10 Nitride 13.5" Lightweight M-Lok Upper - With BCG & CH - 5165449631

TEMPORARILY OUT OF STOCK

Quick Overview

WARNING: Handling firearms or firearms parts can expose you to lead and other petroleum products known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands thoroughly after handling. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

SKU: 5165449631
UPC: 5165449631
MFR#: 5165449631

Barrel Length: 16"
Barrel Profile: Heavy
Gas System: Carbine-length
Barrel Steel: 4150V Chrome Moly Vanadium
Barrel Finish: Nitride
Chrome Lining: No
Muzzle Thread: 5/8-24
Chamber: 7.62x39mm
Twist Rate: 1:10"
Barrel Extension: M4
Diameter at Gas Block: .750
Gas Block Type: Low-profile
Muzzle Device: A2 Flash Hider
Receiver Material: Forged 7075 T6
Receiver Type: M4
Handguard Type: PSA 13.5" Lightweight  M-LOK Rail
Bolt Carrier Group Included: Yes
Bolt Steel: 9310 Steel
Bolt Carrier Profile: Semi-auto
Charging Handle Included: Yes

Add To:

Barrel: 16" 4150V Chrome Moly Vanadium steel, nitride treated and chambered in 7.62x39mm with a 1 in 10" twist rate. Carbine-length direct gas impingement barrel is finished off with a PSA 13.5" Lightweight M-LOK Rail, and a low profile gas block.

Upper: Forged 7075-T6 A3 AR upper is made to MIL-SPECS and hard coat anodized black for durability. Featuring a mil-spec finish, these uppers are made for us right here in the USA by a mil-spec manufacturer.

Bolt9310 Steel 7.62x39 bolt, Semi-auto profile 8620 steel carrier, chrome-lined, and Nitride coated. Nitrided chrome-lined gas key staked per mil-spec. AR-47 extended length firing pin.

SKU: 5165449631
SKU 5165449631
Department Uppers
Brand Palmetto State Armory
Daily Deal No
Daily Deal Expires No
Unit Price No
Youtube Video No
Free Shipping? No
Free Shipping Qty Label No
Free Shipping Qty No
SKU: 5165449631

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 21 questions Browse 21 questions and 28 answers
Will the PSA AR-15 complete lower 7065 work with this upper?
Walter on Oct 14, 2018
description says both carrier and gas key are nitride treated AND chrome lined. is this accurate? have never seen any carrier or key with both.
orion on Sep 26, 2018
BEST ANSWER: Well maybe you haven’t seen many carriers or you just don’t know much about ARs. The carrier and key are chrome lined inside and nitride treated outside.
What magazines are compatible with your AR47 uppers?
Kevin Collins on Sep 26, 2018
BEST ANSWER: Promag will work but feeding the first round can jam.... c-products mags have no issues so far
will this upper work with the KS47 lower that taker AK mags?
jln370 on Oct 8, 2018
BEST ANSWER: No
Do I have to change the buffer setup on my AR-15 Lower?
Bryan A on Oct 21, 2018
BEST ANSWER: No
What is the bore diameter? For reloading purposes, .308, .309, .310?
Trygve V on Sep 27, 2018
BEST ANSWER: 0.310" to 0.312" are encountered, the typical diameter is 0.311" (7.92 mm) says Google and American Rifleman
Ar 10 or ar15 lower needed?
Chris on Sep 26, 2018
BEST ANSWER: AR15 lower
Will this upper fit on a standard mil spec ar15 lower?
Longhollar on Sep 27, 2018
BEST ANSWER: Yes
Does this work on a KS-47 lower?
Beretta989 on Dec 28, 2018
BEST ANSWER: I used a standard AR15 lower
I live in a restricted state that does not allow a flash hider when you remove it and make a crown barrel will it still be 16 inches?
Handle Bar 65 on Oct 30, 2018
BEST ANSWER: Yes, the 16" by law does not include the flash hider unless it is pinned and welded.
Is barrel bore .308, .310, or .311?
OwenT21 on Oct 10, 2018
BEST ANSWER: Customer service from PSA says its .311 bore diameter.
When will this be back in stock?
RevMike M on Feb 12, 2020
Will this be in stock for a while? Or is it a limited run product?
Shane H on Jan 26, 2020
When will this item be in stock?
Dakoda B on Jul 27, 2019
What complete lower will fit?
Jesse A on Jan 22, 2020
BEST ANSWER: I put mine on the PSA Blackhawk, it’s an amazing lower. But any complete AR lower that is mil-spec will work.
Will this upper work with a CMMG
Mutant Lower?
tracy on Jan 25, 2020
BEST ANSWER: CMMGs websites states that the mutant lower will only work with a mutant upper. It goes further to say it is not compatible with an AR style upper. This is an AR style upper. So the short answer is no.
I have a PSA ar15 build on an anderson lower with psa lower parts. Can I swap out the ar15 upper for this upper and continue continue to use the lower and not change anything?
Michael L on Feb 2, 2020
BEST ANSWER: Yes.
It swaps right onto a standard AR-15 lower.
You'll need special mags (I use C-Products), because the tapered 7.62x39 cases stack into the famliar curved "banana".
It's a very accurate (YMMV) upper, I'm very happy with the build quality.
Can this use AK magazines?
VerdinaMan on Oct 26, 2018
BEST ANSWER: NO, AK mags will not work with this upper. You need a standard AR15 lower for this upper. The best 7.62x39 AR15 mags are made by C Products and D&H.
Will this work bc with the ks47lower?
Cookie on Dec 30, 2018
How does this run ammo. fte ftf so and how does the bolt hold up?
thomas B on Nov 1, 2018

Reviews

4.8 / 5.0
16 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
14
1
1
0
0
Accurate and silences very well!
I've found the Winchester "Hog Special" 123 gr soft points at Academy (I believe the same as Power Points elsewhere) are consistently shooting MOA or sub MOA with 5 shot groups in my 16" build. Cheap rounds including steel case are right around 2-2.5". I'm no expert shot either, but with a decent rest, this thing is a tack driver.
User submitted image
Added Jan 27, 2020
January 27, 2020
Great upper! Something different...
Works perfect with my Anderson lower.
User submitted image
User submitted image
January 25, 2020
Purchased
1 year ago
Super lightweight while still extremely durable. Bought this and the PSA Blackhawk classic complete lower... put it together and ready to roll. Never jammed, tight grouping at 200 yards. I recommend 30 round mags, lots of fun to shoot.
January 23, 2020
Purchased
1 year ago
excellent
Fits S&W M&P sport like a glove.

Fits great, shoots great
January 23, 2020
Purchased
1 year ago
Unbelievably accurate
Can’t believe it. 1.5” group at 100 yards with a 3x Prism scope. 10” steel plate at 200yrds is 90+% hit rate. Even 5” plate is possible. This is with wolf and Tula ball ammo. Just make sure to keep the chamber clean. Did get a stuck case after maybe 500 rounds, but that was my fault. Cleaned the chamber and problem solved.
September 17, 2019
psa ar47
revived upper in excellent condition and am pleased with it shot about 500 rounds through it using 10 round magazine. no failures to feed or jams. wolf ammo gave very high standard deviation through chronograph and equally poor groups. garbage in garbage out. shot good groups and decent standard deviation with quality ammo only used s&b were about 1 1/2'' still have not shot any other factory ammo to see what shoots the best yet. I had the extractor fail on the wolf ammo. palmetto promptly sent me a new one and have not had another problem. yes i am still shooting cheep ammo through it. the cheep Russian ammo works fine for shooting free hand steel targets it gives acceptable accuracy at an affordable price just do not expect target grade accuracy out of that type om ammo. great for economical shooting. on the ar platform. I also have a psa ak47 great gun no problems just i like the ar platform better.
August 8, 2019
Purchased
1 year ago
Okay if you like tinkering and shooting on the cheap.
I apologize for how long this review is but I figure all the details i can give will help. So I originally bought this as a plinking/whitetail gun with fairly low expectations considering all the bad attention that ar15s chambered in 7.62x39 get, I had shopped around a good bit and figured that for 300$ it was worth the risk. The upper showed up quick and cosmetically good to go. Right out of the box it ran fine with the 10 and 28 round cpd mags as well as some 20 round asc mags I picked up later, however it was dramatically over gassed and the recoil was uncomfortably heavy. After about 100 rounds I realized the handguard was walking off the barrel nut, so I applied more thread locker and torqued the screws back down. At 350 rounds the extractor snapped off and left me with a dead rifle, after a quick call to psa they said they would send me a bolt head repair kit that after 8 months of waiting has yet to show up which was disappointing, but I figured it'd be good to have another spare so i ordered a second after market extractor as soon as I got off the phone with them. Anyway once I got the upper back up and running I ran through about 1k rounds of mixed steel and brass cased ammo and it ran flawlessly with everything I fed it soft points, hollow points, fmj it ate it all alike with no hiccups whatsoever until about the 1500 round mark the extractor I bought decided to break. So I decided I'd try to fix the gasing/recoil by adding an ar10 buffer spring (on a fixed a2 stock), a psa adjustable gas block and an surefire pro comp which has the gun shooting flat and almost smoother than my 5.56 guns. Ive had zero issues with light strikes, failer to feed, fire, or eject, I've run it with both milspec and after market triggers, but I've mostly run it with a geissele ssa-e. The accuracy was about what I expected with cheap surplus ammo printing out 1-2" groups and good quality brass case holding 1" and under if you do your part. At the end of the day I really do like how the upper runs now, but considering I'm on my 3rd extractor and I had to put about 150$ upgrades into it to get it to shoot how I want it may or not be for everyone.
User submitted image
Added Jun 16, 2019
June 16, 2019
Purchased
1 year ago
Response from Palmetto State Armory
We do apologize for that. Please contact Customer Service so we may resolve this issue.
June 18, 2019
Casey S
GREAT addition too my AR's
I love it. I have it mated to a standard PSA lower and I use C-PRODUCTS 7.62X39 MAGS AND IT WORKS PERFECTLY.
March 1, 2019
Purchased
1 year ago
Did my research and choose correctly
I did my research about AR47s and their apparent problems.... palmetto built an awesome product to combat those issues and haven’t had any problems other than a few feed issues that are entirely mag related (c-products mags are far superior to promag) would definitely recommend to those interested
User submitted image
Added Feb 28, 2019
February 28, 2019
Purchased
1 year ago
What a deal
Always wanted to try a 7.62x39 upper but heard too many horror stories about getting them to run. Ran into this upper and did some research on it before I ordered. PSA did it right when they put this upper together. A great buy with zero issues using c mags.
February 28, 2019
Purchased
1 year ago

Customers Who Viewed This Item Also Viewed