Due to pending legislation and until further legal notice, PSA will prioritize all orders shipping to Washington State.
*This excludes PSA Partnered Fulfilled Items.
Out of stock
PSA Custom 5.56 NATO 16" Nitride 15" MLOK Rifle w/ 3.5lb Curved Bow FCG
Out of stock
PSA Custom 5.56 NATO 16" Nitride 15" MLOK Rifle w/ 3.5lb Curved Bow FCG
| SKU | 51655107322c |
|---|---|
| Brand | PSA Custom |
Customers must read Compliance Information before purchasing.
Product Details
Details
- Barrel Length: 16”
- Barrel Material: 4150V Chrome Moly Vanadium Steel
- Barrel Finish: Phosphate
- Barrel Profile: A2 Style
- Muzzle Device: A2 Flash Hider
- Chamber: 5.56 NATO
- Twist Rate: 1 in 7”
- Extension: M4
- Gas System: Mid-Length
- Gas Block Type: Low Profile .750” Diameter
- Upper Receiver: Forged 7075 T6 Aluminum
- Receiver Style: M4 Flat top with feed ramps
- Receiver Finish: PSA Custom Finish, Teflon Coated
- Forward Assist: Yes
- Dust Cover: Yes
- Handguard Style: PSA Custom 15" Cross-Cut
- Bolt Steel: Carpenter 158
- Bolt Carrier Steel: 8620
- Staked Gas Key: Yes
- Lower Receiver: Forged 7075 T6 Aluminum
- Receiver Finish: PSA Custom Finish, Teflon Coated
- Fire Control Group: PSA Custom 3.5 lb Curved Bow Trigger
- Buffer Tube: 7075 T6 Aluminum Mil-Spec Tube
- Adjustment: 6-position collapsible
- Stock: Magpul MOE
- Sights: MBUS Sight Set
- Magazine: (1) 30-Round Magazine (where available by law)
Features
The Palmetto State Armory Custom Series 5.56 NATO Mid-Length 16" Nitride 15" Cross-Cut MLOK MOE gives you a tried-and-true platform with a PSA Custom Series MLOK compatible handguard and a custom finish that is sure to draw attention.
Features:
Barrel: 16" Chrome-moly vanadium steel barrel Chambered in 5.56 NATO with a 1/7 twist. The barrel is Nitride treated for durability and finished off with a Palmetto State Armory Custom 15" Cross-Cut rail and a birdcage style A2 flash hider.
Upper: Billet 6061-T6 AR upper is Teflon-Coated for durability. These upper receivers are made for us right here in the USA.
Bolt Carrier Group: Nitride treated 8620 steel bolt, with an enhanced firing pin and external 5.56 style extractor. The bolt carrier group is compatible with most aftermarket fire control groups.
Lower: These forged lowers are quality made using 7075-T6 aluminum and are marked "MULTI" for the caliber. Finish is Teflon-coated. The Mil-spec diameter 7075-T6 buffer tube is Teflon Coated with 6 adjustment positions and is fitted with a MOE Carbine Stock, Magpul grip, and PSA Custom 3.5 lb Curved Bow Trigger.
The Palmetto State Armory Custom Series line of accessories, components, and firearms are designed to give you the tactical or competitive advantage when you need it most!
Reviews
Q & A
Compliance
All NFA Rules Apply.
These items are controlled by the U.S. Government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
These items are controlled by the U.S. Government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Magazines will be removed from firearms when shipping to states with magazine capacity restrictions.
