PSA CUSTOM 20" 7.62 NATO CHF G3-10 RIFLE W/15" MLOK RAIL, ACS-L AND 6-24X50 SFP SCOPE - Gray
Barrel Material: FN Cold Hammer Forged Chrome Moly Vanadium
Chamber: 7.62 NATO
Twist Rate: 1 in 12”
Gas System: Rifle-Length
Gas Block Type: Low-profile 5 position click switch adjustable gas block
Upper Receiver: Forged 7075 T6 Aluminum
Receiver Style: PA10 Flat top with Feed Ramps
Receiver Finish: Teflon
Forward Assist: Yes
Dust Cover: Yes
Handguard Type: PSA 15" M-Lok Free Float Rail with Anti-slip and anti-rotation features
Bolt Carrier Group: Yes, Toolcraft PA10 BCG with extra power extractor spring
Staked Gas Key: Yes
Lower Receiver: Forged 7075 T6 Aluminum
Receiver Finish: Teflon
Fire Control Group: PSA NiB 2-Stage
Buffer Tube: 7075 T6 Aluminum
Adjustment: 6-position telescoping stock
Stock: Magpul ACS-L
Optic: PSA Custom 6-24x50 SFP Scope
Magazine: 20 Round PMAG
The Palmetto State Armory PA10 Gen3 features a forged receiver set that has been designed with a relief cut geometry to allow the use of a wider variety of aftermarket bolt carrier groups. A carbine length buffer tube with a short, heavy buffer coupled with a standard PA10 buffer spring. All Gen3 PA10 rifles from Palmetto State Armory come equipped with a Toolcraft BCG, which ensures thousands and thousands of rounds will feed through the rifle. This model includes a PSA Custom 3.5lb Flat Fire Control Group.
Barrel: The FN Cold Hammer Forged Chrome Moly Vanadium 7.62 NATO 1/12 twist, barrel is phosphate treated for accuracy and durability, rifle-length gas system upper is paired with a Palmetto State Armory 15" M-Lok free-float rail, low profile adjustable click detent 5 position gas block, and an A2-style muzzle device. The gas system is enhanced with a nitrided gas tube in order to better resist high heat and corrosion.
Upper: Precision machined from forged 7075-T6 aluminum, then custom Teflon coated. With enhanced dual retention anti-slip and anti-rotating handguards.
Bolt Carrier Group: Tool craft 9310 steel bolt assembly with extra strength extractor springs that is nitride for increased durability. 8620 carrier, nitride treated, with a nitride treated gas key properly staked with grade 8 fasteners. A 7075 T6 aluminum charging handle is also included.
Lower: Precision machined from forged 7075-T6 aluminum, this loweris then then custom Teflon coated. With a PSA NiB 2-Stage Trigger, a Magpul ACS-L Stock, and a Magpul Grip. This is an ideal platform for the serrious long range shooter.
Q & A
These items are controlled by the U.S. Government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Magazines will be removed from firearms when shipping to states with magazine capacity restrictions.