Out of stock
PSA Custom PA10 6.5 Creedmoor, 20" Nitride Mid-Length 15" Cross-Cut MLOK MOE Rifle w/ 2-Stage NiB FCG, Tan
Out of stock

PSA Custom PA10 6.5 Creedmoor, 20" Nitride Mid-Length 15" Cross-Cut MLOK MOE Rifle w/ 2-Stage NiB FCG, Tan

Details
SKU 5655104511
Brand PSA Custom
UPC 5655104511
descriptionProduct Manual
Customers must read Compliance Information before purchasing.

Product Details

Details

  • Barrel Length: 20”
  • Barrel Material: 416R Stainless Steel, Black Teflon-Coated
  • Barrel Profile: A2 Style
  • Chamber: 6.5 Creedmoor
  • Twist Rate: 1 in 8”
  • Extension: M4
  • Gas System: Rifle-Length
  • Gas Block Type: Low-profile 5 position click switch adjustable gas block
  • Upper Receiver: Forged 7075 T6 Aluminum
  • Receiver Style: PA10 Flat top with Feed Ramps
  • Receiver Finish: PSA Custom Teflon Coated
  • Forward Assist: Yes
  • Dust Cover: Yes
  • Handguard Type: PSA Custom 15" Cross-Cut
  • Bolt Carrier Group: 6.5 Creedmoor Laser Engraved BCG w/ extra power extractor spring
  • Staked Gas Key: Yes
  • Lower Receiver: Forged 7075 T6 Aluminum
  • Receiver Finish: PSA Custom Finish, Teflon-based
  • Fire Control Group: PSA NiB 2-Stage AR-15 FCG
  • Buffer Tube: 7075 T6 Aluminum
  • Adjustment: 6-position telescoping stock
  • Stock: Magpul MOE
  • Grip: Magpul MOE
  • Magazine: 20 Round PMAG

Features

You asked we listened! Palmetto State Armory is proud to release our Gen3 PA10 Rifle! The Gen3 model has been enhanced to improve the reliability and longevity of our PA10 platform. This new platform includes several features that have never before been included on our PA-10 platform. We hope you enjoy these new features and look forward to your feedback!

Gen 3 Benefits at a glance:

  • Lower Includes relief cuts for a broader compatibility with 308 BCG's
  • Twice Staked Castle Nuts
  • Standardized carbine length buffer tube with short, heavy buffer
  • Dimpled 416R Teflon-Coated Stainless Steel Barrel
  • 5 Position Adjustable Click Switch Gas Block
  • Extra Power Extractor Springs
  • 7075 T6 Charging Handle Included in all uppers
  • Black Nitride Gas Tube
  • Barrel Nuts properly torqued to military specifications
  • Anti-slip and anti-rotation handguards

 

With enhanced durability and improved function, the new and improved PSA PA10 Gen3 is here.  The Gen3 model offers a black nitride stainless gas tube to better resist high heat and corrosion while maintaining a glossy black finish.  All Gen3 PA10 models come with a dimpled barrel for ease of gas block replacement if you choose to do so. We have also included a newly designed click switch 5-position adjustable gas block so you can specifically tune to your load.

 

The Palmetto State Armory PA10 Gen3 features a forged receiver set that has been designed with a relief cut geometry to allow the use of a wider variety of aftermarket bolt carrier groups. A carbine length buffer tube with a short, heavy buffer coupled with a standard PA10 buffer spring. All Gen3 PA10 rifles from Palmetto State Armory come equipped with a Toolcraft BCG, which ensures thousands and thousands of rounds will feed through the rifle and a 2-Stage EPT nickel boron fire control group that makes for an easy but controllable course of fire.

Barrel: The dimpled, Teflon-Coated 416R Stainless Steel, 6.5 Creedmoor 1/8 twist, Rifle-length gas system upper is paired with a Palmetto State Armory 15" M-Lok free-float rail, low profile adjustable click detent 5 position gas block, and an A2-style muzzle device. The gas system is enhanced with a nitrided gas tube in order to better resist high heat and corrosion.

Upper:  Precision machined from forged 7075-T6 aluminum, then coated with a hard as nails Teflon based finish in our PSA Custom shop. With enhanced dual retention anti-slip and anti-rotating handguards. 

Bolt Carrier Group: Tool craft 9310 steel bolt assembly with extra strength extractor springs that is nitride for increased durability.  8620 carrier, nitride treated, with a nitride treated gas key properly staked with grade 8 fasteners.  A 7075 T6 aluminum charging handle is also included.

Lower: Precision machined from forged 7075-T6 aluminum, these lowers are then coated with a hard as nails Teflon based finish in our PSA Custom shop.  With a 2-Stage Enhanced Nickel Boron Fire Control Group, a Magpul MOE Stock, and a Magpul MOE Grip. This is an ideal platform for the 6.5 Creedmoor cartridge.

 

The Palmetto State Armory Custom Series line of accessories, components, and firearms are designed to give you the tactical or competitive advantage when you need it most!

Reviews

Q & A

Retail Stock

Compliance

All NFA Rules Apply.
These items are controlled by the U.S. Government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Handling firearms or firearms parts can expose you to lead and other petroleum products known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands thoroughly after handling. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).
Loading...