PSA Gen2 KS-47 10.5" Carbine-Length 7.62x39 1/10 Nitride Classic Upper With BCG & CH

More Views

PSA Gen2 KS-47 10.5" Carbine-Length 7.62x39 1/10 Nitride Classic Upper With BCG & CH

In stock

Special Price $ 319.99

Regular Price: $ 479.99

Quick Overview

WARNING: This product can expose you to the chemical lead, which is known to the State of California to cause cancer and reproductive harm. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

SKU: 5165450172
UPC: 5165450172
MFR#: 5165450172

Barrel Length: 10.5"
Barrel Profile: Heavy
Barrel Steel: 4150
Barrel Finish: Nitride
Chrome Lining: No
Muzzle Thread: 5/8-24
Chamber: 7.62x39mm
Twist Rate: 1 in 10"
Barrel Extension: KS47 Gen2 Single-Large Feed Ramp
Gas System Length: Carbine
Diameter at Gas Block: .750"
Gas Block Type: FSB
Muzzle Device: A2-Style
Receiver Material: Forged 7075 T6
Receiver Type: KS-47
Handguard Type: PSA Classic Polymer
Bolt Steel: 9310

Add To:

Upper: The KS-47 G2 upper receiver is precision machined out of forged 7075 T6 aluminum, and then hard coat anodized for durability. While retaining the look of a standard M4 upper, the KS-47 G2 upper is designed to work with the new Gen2 KS-47 lower.  The upper features integrated over-insertion tabs to prevent the bolt from dragging on the magazine. This CMV 4150 barrel is chambered in 7.62x39 with a 1 in 10 twist and has a single, large feed ramp to accommodate the larger case diameter of the 7.62x39 round. The barrel is nitride treated for accuracy and durability, and is finished off with a 5/8-24 thread A2-style compensator. The forward assist, dust cover, charging handle, and safety are all standard AR-15, as are the PSA Classic Polymer Handguards. The KS-47 G2 upper will not work with a standard AR-15 lower.

BCG: The KS-47 Bolt carrier group is designed to work with AK-47 magazines, and features an extended firing pin. The carrier is made of nitride treated 8620 steel, and the gas key is attached with grade 8 bolts and properly staked. The bolt has been redesigned to function properly with most AK-47 magazines. The bolt is nitride treated 9130 steel. 

SKU: 5165450172
SKU 5165450172
Department Uppers
Brand Palmetto State Armory
Daily Deal No
Daily Deal Expires No
Unit Price N/A
Youtube Video No
Free Shipping? No
Free Shipping Qty Label No
Free Shipping Qty No
SKU: 5165450172

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 11 questions Browse 11 questions and 4 answers
Will the gen 2 uppers work with gen 1 lowers?
Charlie M on Feb 4, 2019
BEST ANSWER: Yes gen 1 and gen 2 parts are interchangeable, however you will not get the all benefits and upgrades When mixing G1&G2 parts.
Would it be possible to change the barrel to a 11. 5?
Braulio V on Feb 27, 2019
Will these ever be back in stock again???
Sean K on Jun 19, 2019
HOW WOULD I REGISTER THIS WEAPON AS A SBR? OR JUST BUY IT?
Riley on Mar 18, 2019
BEST ANSWER: Just buy it. Why bother to register for SBR.
Do you make a pistol Upper that can use the standard AR15 Lower?
camilo g on Mar 18, 2019
BEST ANSWER: I think in the comments for the ks47 Uppers they say they are made to work with their lowers the bold face is slightly different or something
What complete lower do you recommend with this upper if you want to use AK magazines?
Vinny on Feb 4, 2019
BEST ANSWER: Says in the description “Designed to work with GEN2 KS-47 LOWERS” “Will NOT WORK WITH AR-15 LOWERS”.
Does this come with a semi auto or FA BCG? Want to run it with a binary trigger.
Jon L on Sep 15, 2019
Is there no 80% Lower option for this KS-47 Upper build?
Christopher F on Sep 7, 2019
Does anyone know when the lowers will be back stock?
GregMiller on Aug 17, 2019
What is the diameter of the barrel where the barrel nut mounts? Is it greater than 1"?
cruzo1981 c on Apr 18, 2019
what is the rail system on ks 47 10.5" pistol ?
Gary A on Mar 9, 2019

Reviews

5.0 / 5.0
7 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
7
0
0
0
0
Don’t wait, buy now!!
Great product at half the competitors cost with lighter weight and more parts commonality. What’s not to love!!? I’ve only put 30-40 rounds through it but all mags I’ve tried lock in and feed.
Triangle handguards. Just modded the round cap a bit
Before I stuck the high speed low drag triangles on
September 10, 2019
Purchased
2 months ago
Great gun for traveling!!
I built three of theses guns and they are great little guns for the money! I have a few other ak,s and theses run as good as any AK!!
September 7, 2019
No Brainer! Buy One!
Paired this upper with a KS-47 Gen 2 pistol lower. The gun runs like a champ! Buy with confidence.
July 14, 2019
Purchased
5 months ago
Built this gen 2 upper on a gen 1 psa KS 47 lower in a pistol with the sb brace and a binary trigger the finished product exceeded all my expectations
June 16, 2019
Purchased
6 months ago
Awesome upper
Make sure you order this upper with the specific PSA lower so you are able to utilize AK mags versus the harder and somewhat more expensive to acquire AR specific 7.62x39 mags - and it has a lot more power than the 223 at the expected distances and 7.62x39 is still cheaper for now

It doesn't have all the same AR functions (mag release, etc) but easy enough to learn with some trigger time.

Mine has been super reliable with absolutely zero malfunctions
June 1, 2019
Purchased
6 months ago
Awsome sauce
I love it I got a novesk flash Suppressor? And a 13 in hand rail and it's literally a half inch of having that flush look but I still love it, got a carry handle and a spark AR red dot I love the set up and the length
User submitted image
Added May 8, 2019
May 8, 2019
Purchased
6 months ago
Very nice upper
Love this upper. I ordered it as shown and added a black magpul carbine hand guard with a KS-47 lower with the SBA3 brace. Looks very very nice.

Took it to the range. 1.5" groups at 50 yards with steel case and a zero magnification red dot. I'll take that all day long.

I did have some light primer strikes, but that was due to a JP spring kit I installed. You may want to stick to the stronger mil-spec springs in your FCG if you plan on using steel case. With the stronger springs it does great.

The only downside (an this is small), no bolt hold open on the last round. But if are used to AKs, it will pose no problem to you. But like I said, minor issue.
User submitted image
User submitted image
April 29, 2019
Purchased
5 months ago

Customers Who Viewed This Item Also Viewed