PSA Gen2 PA-10 Forged Complete MOE EPT .308 Lower with Overmolded Grip - 516447411

More Views

PSA Gen2 PA-10 Forged Complete MOE EPT .308 Lower with Overmolded Grip - 516447411

TEMPORARILY OUT OF STOCK

Quick Overview

Must be 21 or older to purchase.

If you live in California, please read this notice before ordering.

WARNING: This product can expose you to the chemical lead, which is known to the State of California to cause cancer and reproductive harm. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

SKU: 516447411
UPC: 516447411
MFR#: 516447411
  • Caliber: .308
  • Machined from Forged Aluminum 7075-T6
  • Hardcoat Anodizing: MIL-A-8625F, Type III, Class 2
  • Milspec diameter PA-15 6-position Receiver Extension
  • AR15 Enhanced Polished Trigger (EPT)
  • Palmetto State Armory Overmolded A2 Grip, Black
  • Magpul MOE Carbine Stock, Black
  • Staked M4 Lock Nut
  • Standard Heavy Carbine Buffer

Add To:

Forged 7075-T6 aluminum, these lowers are then Black anodize hardcoated to MIL-8625 Type 3 class 2.   With an AR-15 Enhanced Polished Trigger (EPT), and stock and grip options, the PSA PA-10 allows the same configuration flexibility as enjoyed by the AR15, and is an ideal platform for the .308 cartridge. 

The Gen2 PA-10 receivers are functionally compatible with the Gen1 receivers, however we recommend matching Gen2 lowers to Gen2 uppers for best appearance.  There are external cosmetic differences when mixing gen1 and Gen2 upper and lower receivers that some may not find appealing.  

The AR10 platform does not enjoy a common design between manufacturers, like the AR15.    As a result, there can and will be subtle differences in the parts kits of various manufacturers.  Some parts, like the fire control group, are shared with the AR15 platform to preserve the options for upgrading.  For best results, we recommend only using PSA PA-10 parts with our uppers and lower receivers.  We do not recommend using other manufacturers parts in our products.

SKU: 516447411
SKU 516447411
Brand Palmetto State Armory
Daily Deal No
Daily Deal Expires No
Youtube Video No
Free Shipping? No
Free Shipping Qty Label No
Free Shipping Qty No
SKU: 516447411

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 26 questions Browse 26 questions and 48 answers
Can the trigger pull weight be reduced to around 3 lbs?
Bajahumma on May 17, 2019
Will this lower work with the 6.5 creedmoor upper i just ordered from PSA?
Richard J on Mar 18, 2019
BEST ANSWER: Yes, it will. I purchased this and the 6.5 Creedmoor upper and they work just fine with each other.
Why do you have to be 21 to buy?
Yotehunter22 on Nov 18, 2018
PSA Gen2 PA-10 Forged Complete MOE EPT .308 Lower with Overmolded Grip - 516447411
PSA Gen2 PA-10 Forged Complete MOE EPT .308 Lower with Overmolded Grip - 516447411
PSA Gen2 PA-10 MOE EPT Lower With Overmolded Grip - 516446483
PSA Gen2 PA-10 MOE EPT Lower With Overmolded Grip - 516446483
BEST ANSWER: You have to be 21 because AR15 and AR10 lowers are modular and can become a pistol when attached to an upper with a barrel less than 16 inches long.
what magazines do you recommend for this lower ?
Dennis g on Apr 7, 2019
BEST ANSWER: Any standard AR-10 mags work. I've got Magpuls because they were on sale.
Does the lower receiver come with the take down pins?
Ricky M on Jun 29, 2019
Will this rifle cycle only the .308 WIN or will the NATO equivalent 7.62 work also?
Jeremy M on May 22, 2019
PSA Gen2 PA-10 Forged Complete MOE EPT .308 Lower with Overmolded Grip - 516447411
PSA Gen2 PA-10 Forged Complete MOE EPT .308 Lower with Overmolded Grip - 516447411
PSA Gen2 PA10 18
PSA Gen2 PA10 18" Midlength .308 WIN 1:10 Stainless Steel 15" M-Lok Upper with BCG & CH - 516447164
BEST ANSWER: Yes it's 308 cal which is higher pressure than 7.62x51. I shoot both calibers, but prefer 308 hotter speeds.
Does this lower fit psa 65 upper?
Kalei N on Feb 21, 2019
BEST ANSWER: It fits the pa65 upper.
Will a MAGPUL DPMS LR308/SR-25 .308 AR patterned magazine work with the PSA PA-10?
New builder on Jul 19, 2019
BEST ANSWER: Give these a try..... google or magpul. There, I taught you to fish!
Will this lower work with a DPMS patterned upper, or is it proprietary with PSA?
Travis H on Apr 20, 2019
BEST ANSWER: It should work with a dpms. It will not work with a knights armament upper. You have to look at the back of the lower and the upper above the grip below the charging handle. The psa and dpms are curved like a bigger ar15 but a knights ans spikes ect. Are on a 45 degree angle.
Is the buffer tube mil spec or commercial?
Ben M on Apr 17, 2019
BEST ANSWER: Mil spec as stated in the product description
Is this the armalite size or the DPMS size for compatibility?
FireMedic on Feb 21, 2019
BEST ANSWER: I had good luck with DPMS compatibility. I used an Anderson Mfg. barrel and it works great with my PSA bolt carrier group. Hope this helps...
Will this lower fit an aero precision .308 upper?
Lee J on Jul 13, 2019
BEST ANSWER: If it is an AR308 upper or a version of a DPMS one. Which it almost certainly is. I have used these lowers to fit several different uppers in calibers ranging from 308, 6.5 Creed. 243 etc..
Will work for 6.5 creedmoor or do I need a PA-65?
ChrisGPhotos on Jun 7, 2019
BEST ANSWER: The pa 10 lower will work with the 6.5 and the 308 PSA uppers.
Will this lower assembly fit a BCA AR-10 Upper assembly?
Robert M on Jun 5, 2019
BEST ANSWER: All AR-308 such as DPMS uppers seem to fit fine. I have a couple of them and switch uppers with 308, 6.5 Creed, 243, 7MM08, and 260 Rem and all work great. And about the best deal available in a complete quality lower.
Will this lower accept and work well with Pmag Gen 3 mags??.
Traveler on Mar 19, 2019
BEST ANSWER: I use the 20 LR/SA and they work good
Is there a plug for the bottom of this pistol grip that one can purchase? I would like to use it for storage. I already own this lower.
David F on Jun 7, 2019
BEST ANSWER: I changed my grip for another type I like better. For a 25 to 30 dollar investment, you can find one that has a removable bottom plate.
WHICH MAGS DROP FREE?
DAVID J on May 1, 2019
BEST ANSWER: I recommend metal magazines. I have metal 20rd mags and magpul 10rd plastic mags. The metal ones work fine, the plastic ones are snug fitting at first until you use them a few times and put some wear on the corners. The plastic ones also seem to have issues catching and holding the bolt open on the last round.
What is the trigger pull on this item?
Clem1414 on Apr 18, 2019
BEST ANSWER: Mine was 6-6.5 lb. I swapped the trigger and hammer springs with the JP Enterprises Enhanced Reliability 3.5T springs (Red H-spring, green T-spring) and got it down to 4-4.5 lb.
Can I get this in California???
Ever A on Apr 9, 2019
BEST ANSWER: They should ship but they won’t. I think their compliance department needs to revamp the sales of complete lowers. Since bullet buttons are now band we can have featureless of some type of mag lock installed prior to attaching an upper.
Will this fit an PA-10 lower?
CJ F on Apr 4, 2019
PSA Gen2 PA-10 Forged Complete MOE EPT .308 Lower with Overmolded Grip - 516447411
PSA Gen2 PA-10 Forged Complete MOE EPT .308 Lower with Overmolded Grip - 516447411
PSA Custom AR-15 Quick Detach (QD) End Plate - 116005
PSA Custom AR-15 Quick Detach (QD) End Plate - 116005
BEST ANSWER: It should, but no guarantee
The pivot pin and takedown pin on my new PSA lower receiver are smaller diameter than the holes on my upper receiver. How do I correct this?
Robert G D on Jun 26, 2019
Will this work with the Aero Precision M5 upper? Looks compatible from the photos (rounded back-end) but...?
David s on Jun 15, 2019
Since it says this will work for 6.5 creedmoor, is there an advantage for using a PA65 vs the PA10 for Creedmoor only use, not just it will work?
ChrisGPhotos on Jun 7, 2019
Will this lower work with BCA AR-10 Complete Upper 20” 4150 Parkerized SOCOM Barrel, .308 Winchester, Rifle Length Gas System, 1:10 Twist w/ 15” MLOK Rail system?
Frederick M on May 20, 2019
Is this a rifle length buffer tube?
Jesse E on May 10, 2019
Does this come with a magazine ?
Kathy on Mar 1, 2019

Reviews

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Excellent quality!
Very well made and great finish! Perfect fit to my stainless barreled upper.
February 21, 2019
Purchased
1 year ago
GREAAAAT!
You can pay a lot more, BUT you can't do a better. So save your money and buy some of that great ammo PSA is also selling at good prices. The trigger is also better than most (though I will stick in a better one). Better trigger than a friends factory Ruger. Two years earlier I put together another one using almost the same parts as used in this one. That one also cost a heck of a lot more...:-)
November 17, 2018
Purchased
1 year ago

Customers Who Viewed This Item Also Viewed