PSA PA10 GEN 2 Complete Upper Receiver - 516445209

More Views

PSA PA10 GEN 2 Complete Upper Receiver - 516445209

In stock

$ 149.99

Quick Overview

WARNING: This product can expose you to the chemical lead, which is known to the State of California to cause cancer and reproductive harm. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

SKU: 516445209
UPC: 516445209
MFR#: 516445209

PSA Gen 2 PA10 Complete Upper Receiver

New and improved Palmetto State Armory PA10 Gen2 308 Upper receiver is fully assembled and ready built into an upper assembly to your specifications!

With streamlined styling the new and improved PSA PA10 is here.  The Gen2 model offers a more modern appearance and improved functionality.

The upper receiver is machined from forged 7075-T6 Aluminum and hard coat anodized black for durability. Featuring machined T marks, and a mil-spec finish. These uppers are made for us right here in the USA by a mil-spec manufacturer.

Add To:

PSA Gen 2 PA10 Complete Upper Receiver

New and improved Palmetto State Armory PA10 Gen2 308 Upper receiver is fully assembled and ready built into an upper assembly to your specifications!

With streamlined styling the new and improved PSA PA10 is here.  The Gen2 model offers a more modern appearance and improved functionality.

The upper receiver is machined from forged 7075-T6 Aluminum and hard coat anodized black for durability. Featuring machined T marks, and a mil-spec finish. These uppers are made for us right here in the USA by a mil-spec manufacturer.

SKU: 516445209
SKU 516445209
Brand Palmetto State Armory
Daily Deal No
Daily Deal Expires No
Youtube Video No
Free Shipping? No
Free Shipping Qty Label N/A
Free Shipping Qty N/A
SKU: 516445209

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 26 questions Browse 26 questions and 56 answers
it seems half of your ar10 items are out of stock all the time. This makes shopping here very frustrating. How often do you restock items like PSA10 bolt catches and magazine releases ?
Luis S on Jun 19, 2018
BEST ANSWER: I have found PSA to lack in the area of parts for there receivers. mainly in the PSA -10 models. But you can go any where to get the items your asking for. I went to my local gun store and was able to buy a complete lower and upper build kit. since most of the parts for these receivers also are the same parts of all AR 15 style rifles, and for the most part the springs are want is different.
How long till this part is restocked?
sean r on Jun 25, 2018
I have a gen2 upper,by measurement it should be a high profile but many comments say lpw profile.Any way to actually measure this in ensure accuracy of these claims?
sean r on Jul 5, 2018
What is the top rail height on these uppers?
J M on May 3, 2018
You keep sending me emails like this, telling me it's my last chance to snag this, and when I try to " snag" it, it is out of stock everytime, what in the world is going on here? I have signed up to be notified when it gets back in stock, but you keep telling me to buy it, and it's not in stock? wild stuff!
Russell S on Jan 24, 2019
Does this include the bolt carrier?
Chris on Mar 4, 2019
BEST ANSWER: It does not include the bolt carrier. It is just the upper receiver with the forward assist and dust cover installed.
Why don't you include more specs in your online description ie: how many threads for barrel nut, the fact that it only fits "Low Profile" lowers, the fact that it is not compatible with cmmg lowers, etc.?
SSG Rich on Apr 5, 2019
Is it a high or low profile?
Todd M on Jun 2, 2018
BEST ANSWER: Gen 2 is low profile. Google Palmetto State Out of Battery . There's a lot of good information on there about Palmetto State PA10's
Looking at the stock picture online and your pa10 gen 2 upper looks like a gen 1 in the picture. Is this a correct picture or is it an old stock picture?
Dean C on Jul 11, 2018
BEST ANSWER: measure the top part where the charging handle locks into if it measures around 0.150 it's a low profile if it measures around 0.210 it's a high profile
This is a high profile upper? Like a Areo precision right? Not the low profile?
Jamie on Jun 28, 2018
BEST ANSWER: I have 2 PSA PA-10 in 308. One of the tang measures .185 inch and the other measures .191...so which profile should I use in ordering a free floating hand guard for these 2 uppers. I am totally confused on these measurements.
Will this upper work with 6.5 creedmoor?
Josh G on Mar 18, 2019
BEST ANSWER: Absolutely it will work. My 6.5CM's built on PSA uppers shoot fantastically.

You do need to use a PSA lower, but mine have no issue with that !

Be sure to use "DPMS" pattern parts... barrel nut, BCG, barrel.
Is this a complete upper? I’m reading online and the picture matches a stripped upper... what all comes with this product ?
Damian on Mar 7, 2019
BEST ANSWER: It’s a complete upper with forward assist + dust cover. A stripped upper comes with nothing but the upper. A word to the wise, check it good to make sure they don’t send u a blend...
So yes I am a .308 rookie. My first build. I am looking at a hand-guard and it indicates it is : DPMS High Profile.
Will that properly fit on this upper?
DollarBillsYall on May 17, 2019
BEST ANSWER: Depends on if the upper is a low profile or high profile. The handguard will go on, just might not line up correctly. Look at the rear of the reciver where the charging handle goes in. The "low profile" is 1/8 and the "high profile" is 3/16.
Will a 24” Brownells heavy profile 6.5 Creedmoor 308 barrel work in this upper?
Chad S on May 4, 2019
BEST ANSWER: You can put a standard or heavy 308 or the 6.5 creedmoor barrel on this upper.
Will AR15 free float handguards fit on these PA10 uppers with a standard barrel nut?
Christian B on Aug 24, 2018
BEST ANSWER: I would not answer this because: In my experience, I have brought many types of handguards to experiment with. So, My recommendation to you: Call the manufacturer and get with his technical staff or engineers. Do your homework and prewrite your questions before asking. Also get out your micrometers and measure your diameters and use thread gauges also. Last possibility, look up a forum like this and get with a real gunsmith.
Hello. Will this upper fit on a Diamondback DB10 lower? Mine came with an extra barrel in 6.5 Creedmoor and I'm looking to build a complete upper with it. Thanks!
Mark L on Jun 5, 2019
BEST ANSWER: I can't say for sure... But I bought the PSA because it fit a huge selection of lowers. It fit mine perfectly. Best I can do is give you my opinion. It more than likely will fit. A lot of these companies that pop up over night either A. Make stuff that is only compatabile with their brand... Meaning they aren't milspec. Stick to milspec. Again I would say yes It would be compatible. Hope that helps.
Will this upper fit DPMS Oracle lower?
Harold W on Apr 21, 2019
BEST ANSWER: No guarantees… remember there are no "Mil-Spec" guidelines for Large Frame AR's. … so most manufacturers build 'em to their spec's.

Slight variances amongst the various manufacturers are out there, receiver pin locations... upper to lower fit,

So in order to be sure, use a PSA Lower., PSA PA10 / PA65's are a heck of a solid foundation for a Large Frame AR.receiver set

I have built numerous, and enjoy the bargain price. Frankly the price allows me to set them up the way I like.

BTW...Only AR15's have a "Mil-Spec" guideline.
does this work with a Aero Precision lowers?
kyle d on Mar 30, 2019
BEST ANSWER: Ar10 stuff is not mil spec and different brand uppers and lowers if they fit will not aesthetically match, even the PSA gen 1 and gen 2 don't match together.
What 80% lower will this work with?
G H on Jun 17, 2019
Looking to put a 16 inch barrel on your AR-10 receiver can you tell me where I could get one that would be compatible with your receiver bolt and bolt carrier group ?

Thanks Alan
Alan M on Jun 11, 2019
I have a 308 barrel already. Is this upper a plug and play type system? Like if I ordered this will it have every thing I need to attach my barrel
Corey G on May 25, 2019
Is this upper compatible with a Krieger AR10 DPMS barrel?
Alexandros N on May 23, 2019
How is a barrel attached to this PA10 Upper? Is the Barrel threaded?
wes h on Apr 2, 2019
BEST ANSWER: A barrel nut.
Is this for a pistol or rifle? What would be the best complete lower that would fit this upper? How long is this upper?
Damian on Mar 7, 2019
I bought a lower 80% will this not fit? It is a forged from Noreen but I can't find a forged upper that seen to match except these. They tend to be these billet flat sided things that do not match anything. I'm sure the answer is going to be nope only psa to psa but I'm hoping for something else.
Daniel B on Mar 3, 2019
Will this "PSA PA10 GEN 2 COMPLETE UPPER RECEIVER - 516445209 need anything thing else other than a lower to be complete?
Ken I on Mar 1, 2019
BEST ANSWER: You might consider adding a barrel.

Reviews

4.3 / 5.0
13 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
7
3
3
0
0
Well if you have a gen 2 lower like I do then you will need this upper a gen 1 upper needs to much modification the gen 2’s together fit like a glove
June 14, 2019
Purchased
1 month ago
great deal
Used a PSA upper and lower to make a light weight 308 rifle. I chose all custom parts to make a accurate (.75') shooter, that weights around 7.5 lbs. The only warning is make sure you purchase a low profile hand guard. Ask me how I know :)
June 13, 2019
Purchased
2 months ago
It works, just buy a matching lower.
As I have been learning more about 308 ARs, the most important thing I can stress is buy a matching upper and lower set. There is no Mil-Spec for 308s. Every brand has a different design.

The fit with my PSA gen2 lower isn’t exactly perfect, but it works and looks like it belongs together.

I put a cheap AIM high profile handguard on and it doesn’t match at all. I don’t care enough to spend more money on a matching handguard.
June 5, 2019
psa pa 10 gen 2 upper
very good upper had no problems with at all..if i build another one i will buy the same one again..thank you..
May 12, 2019
Purchased
3 months ago
Best Upper I’ve ever bought!
Great product fit my 6.5 Creedmoor lower exactly!! Great product will buy again soon!!!
6.5 Creedmoor complete in Titanium Blue! Parts fit amazingly good together. 
Thanks PSA!
6.5 Creedmoor complete in Titanium Blue! Parts fit amazingly good together. Thanks PSA!
May 8, 2019
Purchased
3 months ago
Clearance issues
When paired with a PSA gen 2 lower the bolt catch failed to function. Had to file the interior of the upper out as well as the catch itself to gain the clearance needed. Buying a complete upper receiver should function as manufactured I shouldn’t have to work out the bugs and troubleshoot just to get it to operate properly. However now it runs great and is sub moa at 100yd with hand loads.
April 21, 2019
Purchased
3 months ago
Response from Palmetto State Armory
We do apologize for that. Please contact Customer Service so we may resolve this issue.
April 22, 2019
Casey S
Perfect fit
Perfect fit to the complete lower I bought in January. Now I just have to start collecting the other stuff. I found a PSA 18" stainless steel barrel on Gun Broker... also a perfect fit.
March 11, 2019
Purchased
3 months ago
Very nice upper for the price
The upper itself is very nice for the price. Mates up nicely with my pa10 lower. The only problem I have is finding parts to finish my lower. Psa is out of stock on all their PSA specific parts, and have been for months. C'mon PSA. If your selling stripped lowers let's have the parts you know people will need in stock to finish their projects
January 21, 2019
Purchased
6 months ago
Looks fine but not a tight fit with the PSA gen2 lower. There’s a small gap at back of upper where it meets the lower. When you have to buy the matching upper and lower the fit should be perfect and tight.
May 10, 2018
Purchased
1 year ago
Mostly good
The forward assist pin hole is drilled through an into the side of the upper, leaving a groove . This leaves flashing from the operation. It wouldn't take but a moment to debur the grove that is left. Otherwise, I like it. This keeps it from being a great product and leaves it a functional product and not an exceptional product.
May 9, 2018
Purchased
1 year ago
Response from Palmetto State Armory
We do apologize for that. Since all of our parts and firearms are covered by our Unlimited Lifetime Warranty, if you have any issues arise from the craftsmanship of the product, we can either have select parts sent to you for you to replace, or we can have the item brought in, at no cost to you, so we can repair or replace the defective product. Please contact Customer Service so we may resolve this issue.
May 9, 2018
Casey S

Customers Who Viewed This Item Also Viewed