PSA PA10 MOE EPT Lower Build Kit, Black

More Views

PSA PA10 MOE EPT Lower Build Kit, Black

TEMPORARILY OUT OF STOCK

Quick Overview

free shipping Free Shipping applies to this item only and not the entire order.

WARNING: This product can expose you to the chemical lead, which is known to the State of California to cause cancer and reproductive harm. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

SKU: 5165448184
UPC: 5165448184
MFR#: 516446760R

PSA Enhanced Polished (EPT) Fire Control Group
Magazine Catch Assembly
Front and Rear Takedown Pins, Springs, and Detents
PA-10 Bolt Catch Assembly
Safety Selector Assembly
Magpul MOE Grip, Black
Magpul MOE Stock, Black
Six-Position, 7075-T6, PA-10 Buffer Tube
Carbine Spring
Latch Plate
Castle Nut
PA10 Carbine Buffer

Add To:

The trigger guard assembly is not needed since the PSA PA10 Stripped Lower Receiver features an integrated trigger guard.

The safety selector, fire control group, and grip on the PA10 are identical to their AR15 counterparts. The PA-10 bolt catch, takedown pins, buffer tube, and buffer are different than their AR15 counterparts and are not interchangeable.  Use of AR15 components for the bolt catch, takedown pins, buffer tube, and buffer are not recommended and may void any warranties.

SKU: 5165448184
SKU 5165448184
Brand Palmetto State Armory
Daily Deal No
Daily Deal Expires No
Youtube Video No
Free Shipping? Yes
Free Shipping Qty Label N/A
Free Shipping Qty N/A
SKU: 5165448184

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 24 questions Browse 24 questions and 31 answers
Is this compatible with an Aero Precision M5?
Devin W on May 4, 2018
BEST ANSWER: No not all of the kit. The takedown pins are specific to psa lowers but the rest of the kit will work.
Will this stock work with the buffer tube included in this PA10 lower parts kit? (MOE EPT)
chertkhov on May 20, 2018
PSA PA10 MOE EPT Lower Build Kit, Black
PSA PA10 MOE EPT Lower Build Kit, Black
Magpul PRS Gen3 Precision Adjustable Stock - MAG672
Magpul PRS Gen3 Precision Adjustable Stock - MAG672
BEST ANSWER: Yes it will. It's the same setup I have on mine.
Will you ever have a PA10 lower build kit with the ACS-L stock?
Justin F on Apr 27, 2018
Is this compatible with the 308 80% Percent Arms Lower?
Robert K on Jul 26, 2018
Is this compatible with PSA gen 2 pa10 lower?
DMY04 on Apr 27, 2018
BEST ANSWER: Yes it is
Does this lower kit work with an aero precision m5 lower?
Joe B on May 6, 2018
BEST ANSWER: No it doesnt thats what i had when i bought it so i had to buy a pa 10 lower take down pins dont line up
when is this back in stock?? I did hit the notify button
Edward Y on Aug 30, 2018
how long is spring?
how heavy is buffer?
xman48 on Jan 11, 2019
PSA PA10 MOE EPT Lower Build Kit, Black
PSA PA10 MOE EPT Lower Build Kit, Black
PSA PA10 MIAD CTR EPT Lower Build Kit, Black - 5165448238
PSA PA10 MIAD CTR EPT Lower Build Kit, Black - 5165448238
PSA PA10 ACT Lower Build Kit - 503624
PSA PA10 ACT Lower Build Kit - 503624
PSA PA10 ACS-L EPT Lower Build Kit, Black
PSA PA10 ACS-L EPT Lower Build Kit, Black
PSA PA10 QMS Lower Build Kit - 503623
PSA PA10 QMS Lower Build Kit - 503623
PSA PA10 MOE PLUS Black Lower Build Kit - 503563
PSA PA10 MOE PLUS Black Lower Build Kit - 503563
PSA PA10 Buffer Tube Assembly - 506798
PSA PA10 Buffer Tube Assembly - 506798
PSA PA10 Carbine Buffer Spring - 504269
PSA PA10 Carbine Buffer Spring - 504269
PSA PA10 .308 Classic Stock Kit Black - 503662
PSA PA10 .308 Classic Stock Kit Black - 503662
PSA PA10 Enhanced Classic Lower Build Kit with Overmolded Grip - 5165448229
PSA PA10 Enhanced Classic Lower Build Kit with Overmolded Grip - 5165448229
BEST ANSWER: The spring is a standard AR-10 spring length and the buffer tube is the same. The buffer tube is hollowed out aluminum so it's pretty light weight. Think AR-15 just a little bigger. Everything is just ratched up a notch to accommodate the .308/7.62x51 round. Nothing weighs more than what's necessary for a semi-auto .308 rifle...
Will this buffer work with a rifle length gas system?
Bcamp on Aug 16, 2018
Will this kit work for the Gen 1 lower?
R B on May 26, 2018
Why do you keep sending me emails saying this is just what I need when it is never in stock? When will it be back in stock?
Skuman on Feb 8, 2019
does this include an extended mag release button?
andy p on Sep 23, 2018
BEST ANSWER: The button is the same size. Do you mean the mag release pin that the button screws onto? If so, then the answer is “no”. You’ll need to buy an AR-10 extended mag release.
Does this lower work for both 308 & 6.5 credmore?
Nick F on Nov 24, 2018
BEST ANSWER: Yes it does for the PA10 stripped lowers. To my knowledge this is the only lower parts kit that works with the pa10 stripped lowers. The take down pins are different then other ar10 sr25 lr308 lowers. Long story short if you have a pa10 lower then use this if you have another make check compatibility with the manufacturer.
Hello
Can this be used with a dedicated 9mm lower for a 9mm pistol and/or rifle build??
Thank you!
bubba on Dec 30, 2018
BEST ANSWER: some parts from this set can be used on a 9mm or other build . the buffer tube and buffer will not work though .
Is this comparable with a psa gen 2 pa 10 upper?
Loudermilk2014 on Dec 26, 2018
BEST ANSWER: It is. My PSA gen-2 works well with this kit. No complaints after a year, using a wide variety of ammo out of an 18" PSA .308 upper.
Is this for a stripped gen 1?
Forrest B on May 11, 2018
BEST ANSWER: Yes gen 1 and 2
Is the buffer tube commercial or milspec size?
Cjbmxz on Jul 11, 2018
BEST ANSWER: Commercial PA 10s can't be mil spec because they are not produced for the military
I need buffer tube, buffer and spring for creedmore 6.5 upper, what do you suggest?
jimmy jam on Feb 18, 2019
Whats the difference between the gen 2 lower and a pa10 lower? Can i buy a parts kit for a gen 2 and it fit a orginal pa10? And vice versa
Rattlesnake on Jan 3, 2019
Will this kit work with a Tennessee Arms lower?
Larry on Dec 28, 2018
Will this parts kit work with a polymer 80 lower receiver?
James G on Dec 22, 2018
Is this kit compatible with the DPMS Gen2 Lower Receiver?
Don S on Oct 31, 2018
Will this ship to California?
Thomas S on Sep 27, 2018
Would this kit work in a Detroit gun works ar10 lower ?
frank h on May 12, 2018

Reviews

4.6 / 5.0
31 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
22
5
4
0
0
Good kit everything you need
April 27, 2019
Purchased
11 months ago
Great value
My first PA10 build, so I wanted to build a gun that would be able to shot more long range shots with so for very pleased with rifle.
February 20, 2019
Purchased
6 months ago
All parts present and accounted for!
I really appreciate the effort PSA puts into making sure all the proper pins, springs, screws, and parts are included with the lower receiver kits they sell.

It could be a real hassle to find that your build is "On Hold"! Not the case with PSA!
February 20, 2019
Purchased
6 months ago
PSA PA10 MOE EPT Lower Build Kit
Good quality parts kit, however if your building a Diamond Back AR10 you will need to order the lower take down pin and pivot pin from Diamondback, the ones provided in the kit are the wrong diameter and length.
January 27, 2019
Purchased
6 months ago
AR-15 parts do not all work in AR-10s
I have used Magpul parts on all of my AR-15 builds so when I decided to build an AR-10 I went with a Magpul kit. Unfortunately, this kit didn’t achieve the same high standard as the AR-15 kits. It appears that PSA thinks that AR-15 parts will work on AR-10s, which is not the case.

The mag release pin is too short, as are the takedown and pivot pins. The bolt release plunger and pistol grip door were also missing. I have requested the proper parts from PSA but have not received them. After a few weeks of waiting I bought the correct parts elsewhere so I could complete my build.

Even though there is no mil-spec for AR-10s, it should still be readily apparent (especially to PSA) that AR-10s require bigger parts than AR-15s. The parts that are correct for the AR-10 do work well.

This is the first time that PSA has let me down after several flawless purchases, but hopefully it will be the last. I plan to keep buying from them until I no longer can trust them to make things right. I hope that time never comes.
January 25, 2019
Purchased
7 months ago
Works great good quality
January 25, 2019
Purchased
7 months ago
I purchased this for a PSA lower i had. The price was good, but the bolt catch sticks a bit and needs to be moved quite a bit to keep it loose. I also had to replace to magazine catch for proper functioning.
January 20, 2019
Purchased
7 months ago
Worth it
Pretty nice quality overall. I don't like how psa has a proprietary design for their takedown pins but you can buy that upgrade kit for $20 then by your own lower parts kit. The Magpul stuff is nice but you will definitely need to upgrade the trigger. It has about a 5 lb pull from my digital pull gauge. If you are doing any kind of long range an upgrade is a must.
December 31, 2018
decent quality,fit well,would be nice if they offered stainless pieces.
December 8, 2018
Purchased
8 months ago
For the price, can’t beat it when compared to pricey brand names like DD. Just brought a PSA AR pistol build as well!
November 24, 2018
Purchased
9 months ago

Customers Who Viewed This Item Also Viewed