AR-15 carbine length barreled upper receiver

More Views

PSA PA47 16" Carbine-Length 7.62x39 Classic Upper - With BCG & CH - 5165449462

TEMPORARILY OUT OF STOCK

Quick Overview

free shipping Free Shipping applies to this item only and not the entire order.

WARNING: This product can expose you to the chemical lead, which is known to the State of California to cause cancer and reproductive harm. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

SKU: 5165449462
UPC: 5165449462
MFR#: 5165449462

16" Barrel length
Chrome moly vanadium barrel
7.62 x 39mm Chamber
1 in 10" twist rate
F-marked Front Sight Base
PSA Classic Handguards
A2 Flash Hider
Forged upper receiver
Carbine-length Gas System

Add To:

Barrel: 16", chrome moly vanadium. Chambered in 7.62x39mm, with a 1/10 twist, and a carbine-length gas system. Barrel is finished off with a .750" diameter F-marked front sight base with sling swivel, standard handguards, and an A2 flash hider.

Upper: Forged 7075-T6 A3 AR upper is hard coat anodized black for durability. Featuring M4 feedramp cuts, these upper upper receivers are made for us right here in the USA.

Bolt Carrier Group: 9310 nitride treated 7.62x39 bolt, Semi auto profile 8620 nitrided steel carrier. Nitride gas key staked per mil-spec. AR47 extended length firing pin.

Each upper is test fired to check gas function.

SKU: 5165449462
SKU 5165449462
Brand Palmetto State Armory
Daily Deal No
Daily Deal Expires No
Youtube Video No
Free Shipping? Yes
Free Shipping Qty Label No
Free Shipping Qty No
SKU: 5165449462

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 52 questions Browse 52 questions and 108 answers
What PSA lowers are compatible with the pa-47 upper?
Robert K on Sep 6, 2018
BEST ANSWER: Pa-15 lowers or mil spec ar-15 lowers.
Will this fit on a standard ar-15 lower?
Andrew T on Sep 6, 2018
BEST ANSWER: Yep mine is on a Anderson lower
Does the ar47 require a special magazine for the ar15 lower?
Sam V on Sep 7, 2018
BEST ANSWER: yes .... c-products work good for me
Does the KS47 lower fit this upper?
Thomas P on Sep 6, 2018
BEST ANSWER: The bolt carrier group is laser engraved ks-47 PSA hybrid. But the upper appears to be a standard A.R. 15 forged
Is the barrel nitride treated?
Jim B on Sep 6, 2018
BEST ANSWER: Mine definitely came Nitride treated, not phosphate.
It says semi-auto BCG. Is it neutered or will it work full auto?
Rick H on Sep 26, 2018
BEST ANSWER: No, the rear of a semi-auto BCG does not have an even "shroud," preventing something like lightning link from being operable
5.56 NATO Full-Auto Profile Bolt Carrier Group - 35099
5.56 NATO Full-Auto Profile Bolt Carrier Group - 35099
what type of magazine?
Tomtom on Nov 3, 2018
BEST ANSWER: I use the CPD mags . Because I live in California they have to be 10 rounds or less.
Is this Nitrided or phosphate?
matt l on Oct 24, 2018
BEST ANSWER: Definately Nitride. Also all components of the BCG (not gas rings and firing pin). The cluster in the bolt Are nitrided And have a smooth fit
will it handle .308 ammo ?
tom on Oct 23, 2018
BEST ANSWER: NO, 308 (7.62x51) is not the same as 7.62x39
Does this require a special buffer? Thanks in advance.
Chvck on Sep 14, 2018
BEST ANSWER: I would go with at least a H buffer. A carbine weight will work but your recoil and wear on your rifle will be a little heavier. It’ll improve your cycle rate also by slowing it a smidge.
What profile is the barrel? Heavy or medium contour?
Mitchell C on Sep 11, 2018
BEST ANSWER: I would have to say Heavy, there are no cutouts or anything to lighten it.
Will this upper fit a PSA lower#7779346?
Howard T on Dec 1, 2018
BEST ANSWER: NOT compatible with the KS 47 lower. Only works with a mill spec AR-15 lower and "C" mags. don't use SKU numbers in questions, no one is gonna go back and look for a
SKU number 7779346
Will this function in a m16 on full auto? If not can the bolt carrier be switched with a full auto 5.56 bolt carrier as one normally would change a bolt carrier, ie no modification?
Warren H on Nov 26, 2018
BEST ANSWER: Yes it will as long as you use the proper mag for it.
Will this upper work on a Colt/Walther 22lr lower?
Ronald P on Oct 23, 2018
BEST ANSWER: No.
Does this have the hybrid KS-47 BCG included?
K C on Dec 30, 2018
BEST ANSWER: It has a bolt that comes with the upper buy a 7.62x39 mag bolt it to any modern AR15 lower and hammer away. I've put a couple hundred rounds down range and its accurate I like it a lot. The bolt carrier group is described in the ad, read it.
Will this upper fit my Ruger AR556 lower? What mags are recommended?
G B on Sep 7, 2018
BEST ANSWER: I don’t see why it shouldn’t fit on a ruger lower, but don’t take that at 100%. I’m assuming it’s basically a mil spec lower.
But what I’m reading through here is that C-products Mags function fine with 7.62 x 39 ammo.
what is the thread size on barrel 7.62x39 ar upper ? i cant use flash hider in my state .
blu323 on Dec 11, 2018
BEST ANSWER: it should be 5/8x24 that’s standard for a 30 cal I didn’t take mine off but have installed plenty on ARS
what magazines do you recommend?
Gustavo on Nov 2, 2018
BEST ANSWER: I use CPD 10-round and ASC 20-round with no problems.
Is it common for the extractor to break? It seems several have had this happen to them.
Keith R on Dec 11, 2018
BEST ANSWER: Everything eventually breaks. I've put 45,000 rounds of steel casing through mine and there is no sign of damage.
What type of hand guards can this accept?
Askn4afriend on Dec 11, 2018
BEST ANSWER: Any two piece drop in style at carbine langth if you want a free float handgard the gas block must be changed but you can put any hand gard you want with a little more effort or your local gunsmith but I would say watch some videos to get a much better idea of how it works
Has anyone had issues with round not going into battery? Bolt closes without issue when empty, but when trying to chamber a round the bolt doesn’t close. RSO at my range said it may be the tolerances in the chamber being too tight or that it’s the buffer spring?
Patrick James on Feb 24, 2019
BEST ANSWER: I didn’t have that problem but my problem was trying to find a good mag that worked, however I did have a problem like that a long time ago with another upper purchased from another company and had to have the barrel chamber cut a little deeper.
do we know what treading on the barrel is for the muzzle? is just bought one of these from u guys looking at muzzles :)
rik d on Nov 27, 2018
BEST ANSWER: Barrel Thread: 5/8 – 24 x 1 right hand that is same as 308 caliber
Is this upper the same that is used in your KS-47? If so what is the recommended PSA lower?
Thomas on Jan 18, 2019
BEST ANSWER: Mine is on a standard AR-15 Lower. You just have to get the magazines.
Is this the same upper used in the KS-47?
Thomas on Jan 19, 2019
BEST ANSWER: NO_NO_NO! Not the same as a KS-47. The AR-47 upper is NOT milled for AK mags. The KS-47 upper IS MILLED for AK mags, and WILL NOT work on a standard AR-15 lower.
AR-47 upper needs a mill spec AR-15 lower and uses C mags,
KS-47 upper needs a KS-47 lower and uses AK mags.
You CANNOT mix and match.
What bore diameter is this rifle? I will be reloading hunting loads for wild hogs. Are they all the same? .309, .310, .311?
Keith R on Dec 27, 2018
BEST ANSWER: .310
Will this fit a BRS47 lower?
Weston H on Dec 1, 2018
BEST ANSWER: This WILL not accept an AK mag. This must be used with a standard AR-15 lower.
Internal bore size of 7.62by 39 ?
Michael Y on Nov 29, 2018
BEST ANSWER: .310 diameter.
Does this upper have a .310 " bore ? or a .308 bore"..?
reason I ask is Ruger used both barrel dia.s in their Mini 30..(in the past)
My loading dies have both 308 & 310 expander balls..
JOE on Nov 7, 2018
BEST ANSWER: Question has been answered
Any problems running steel cased ammo ?
Diablo on Oct 28, 2018
BEST ANSWER: No, I have fired over 300 rounds through it. The first 80 were brass cased and the last 240 or so were steel cased. I am using "C" Mags.
Which PSA lower would this upper work and look best with ??
Dennis H on Oct 24, 2018
BEST ANSWER: the standard multi caliber PA15 lower

Reviews

4.8 / 5.0
104 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
88
11
3
2
0
PA47 Upper
This was a complete upper to go on a PA47 lower. It came with the hybrid KS47 bolt but had a milspec upper receiver so it will not work on a KS47 lower.
May 15, 2019
Purchased
9 months ago
Buy it, customize it. Whatever
Excellent out the box, thank you for your professionalism.
April 17, 2019
Purchased
5 months ago
Very Happy with this purchase
First, shipping and delivery was very fast. I was notified throughout of its estimated arrival and it was on time.

Second, BUY one or more you will be happy you did. I put this Upper on a PSA BlackHawk multi-cal lower and it fit perfect. The rifle functions perfectly straight from the factory.

Third, I have fired TulAmmo 122 gr FMJ steel cased and Win 123 gr FMJ Brass cased from this rifle, No FTF, FTE. That's right its so dependable its almost boring, works every time.

Last, It is more accurate than I am, but that is what practice is all about. Get it, add mags and lots of ammo for an all around dependable rifle.
April 12, 2019
Great rifle at a good price.
This is the third PSA AR I've built, and everything works flawlessly.
March 31, 2019
Purchased
5 months ago
Bang'n
Better than expected quality, reasonably priced, love it!!
March 30, 2019
Purchased
5 months ago
Very impressed great quality as far as I'm concerned
Great uper it works great and for the money you can't beat it. I put on a lower and it fits perfect. I've had no problems with it. It seems to be very well made. Every time I pull the trigger it goes boom.
March 23, 2019
Purchased
5 months ago
7.62 x 39 classic upper
I’ve put over 150 rounds thru this upper and one single problem! Once again completely satisfied with PSA product.
March 21, 2019
Purchased
5 months ago
Excellant Quality
As always , i am very pleased with another PSA BUILD project. Added a compltete lower to this and seems to fit and function great. Will still need to try long range shots but close in scope sitting was perfect.
March 13, 2019
Purchased
6 months ago
Finally got a 762x39 hybrid AR that works ! Great job !
Great fit and finish . Fires flawlessly.
Might try some different mags just to see how they work .
Very nice for a hybrid they said doesn’t work ! It does !!
March 13, 2019
Purchased
6 months ago
Great option for the AR platform!!!!
100 rounds through her, zero issues, bought as an open site, general purpose plinker, and couldn't be happier!!
7.62x39 is the middle one.
7.62x39 is the middle one.
March 4, 2019
Purchased
6 months ago

Customers Who Viewed This Item Also Viewed