Vortex Sonora 4-12x44 Riflescope w/ Dead-Hold BDC Reticle & Vortex Cantilever Ring Mount For 1" Tube with 2" Offset

More Views

Vortex Sonora 4-12x44 Riflescope w/ Dead-Hold BDC Reticle & Vortex Cantilever Ring Mount For 1" Tube with 2" Offset


Availability: In stock

$ 149.99

Quick Overview

free shipping Free Shipping applies to this item only and not the entire order.

SKU: KIT-0380


SKU: 5165490517
QTY: 1

SKU: 506424
QTY: 1

Add To:


Vortex Sonora 4-12x44 Riflescope w/ Dead-Hold BDC Reticle

The Vortex Sonora redefines what a rifle scope can do. The Sonora combines fully multi-coated lenses for a clear sight picture with generous eye relief. The Sonora also features a hard-anodized, single-piece, aircraft-grade aluminum tube that is nitrogen purged and O-ring sealed that delivers a waterproof, fogproof, weatherproof performance no matter the weather.


  • Anti-reflective lens coatings increase light transmission for greater clarity
  • Gas purged and o-ring sealed delivering waterproof and fogproof performance
  • Waterproof performance designed to withstand harsh weather conditions
  • The shockproof, rugged construction withstands the highest levels of recoil and impact



  • Reticle: Dead-Hold BDC
  • Tube Size: 1"
  • Length: 13.5"
  • Weight: 15.8 oz.
  • Eye Relief: 4"
  • Field of View: 24.7'-8.4' @ 100 Yard
  • Adjustment: 1/4 MOA
  • Travel Per Rotation: 15 MOA
  • Total Windage Travel: 60 MOA
  • Total Elevation Travel: 60 MOA


Vortex Cantilever Ring Mount For 1" Tube with 2" Offset 

Use this cantilever mount for mounting 1-inch telescopic sights onto flattop style AR-15 rifles. The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement on an AR-15. Aluminum contruction.


  • The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base.



  • Model: CM-102
  • Mount Style: Cantilever
  • Offset: 2"
  • Rings: 1"
  • Weight: 6.7 oz.
  • Ring Screw Torque: 16 inch/lbs
  • Base Screw Torque: 20 inch/lbs
Additional Information
SKU KIT-0380
Department Kit/Combo
Brand Vortex
Daily Deal No
Daily Deal Expires No
Unit Price No
Youtube Video No
Free Shipping? Yes
Free Shipping Qty Label No
Free Shipping Qty No

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 21 questions Browse 21 questions and 24 answers
Up to what caliber is this rated
Baraco on Sep 6, 2019
BEST ANSWER: Per vortex customer service it is rated for magnum calibers yet they recommend stepping up some if using 300 win mag/ 300 wsm or lager calibers.
Never heard of sonora model can you explain ?
payton v on Sep 7, 2019
BEST ANSWER: Per Vortex customer service it is same as copperhead just different name for different distributors.
Will this hold up to 12 gauge recoil on a break action 12 gauge shotgun?
Jeff P on Sep 6, 2019
BEST ANSWER: You're kidding right???Enter
Will this clear a Magpul rear site in the folded position?
Brent S on Sep 7, 2019
BEST ANSWER: Do you mean sight? Yes, buy you will have to remove four star head (not torx, not hex) screws in order to remove the scope and used the blocked sights. By that time you will be a mall ninja full of holes. Perhaps you should considered off set backup sights. They were invented more than a decade ago.
Will this scope and mount be good for hunting deer on an AR platform in 300 blackout?
Casey C on Sep 6, 2019
BEST ANSWER: Yes it will perform as designed. You will need to figure the bullet drop when sighting in to determine the cirrect drop for the reticle..
What focal plane is this and is it good for 308?
Paul M on Sep 8, 2019
BEST ANSWER: It's a second focal plane. Should do just fine with .308.
What isnthe purpose of the red flags?
James H on Sep 8, 2019
BEST ANSWER: I believe it's palmetto state's way of protesting against red flag laws that are being proposed.
Will the 2" off set be enough to see over the front post sight of an Ar-15?
Randy K on Sep 14, 2019
BEST ANSWER: No, this mount only elevates the center of the scope to 1.59" above your receiver. The 2" offset has nothing to do with elevating your scope, but it does gives you the ability to place your scope 2" forward on the receiver to insure proper eye relief. Here are some options in order of cost. 1. Purchase a 1' riser to place between the mount, and receiver. 2. You can replace the front post with a lower profile gas block. 3. I would recommend free-floating your barrel, by upgrading your handguard, and gas block. 4. Buy or build a complete new upper.
Does this scope have paralex adjustment ? If not what is the paralex set for ?
Oldawg on Sep 9, 2019
BEST ANSWER: Based on the copperhead information out there, and the premise this is a copperhead “rebranded” the parallax is set at 100 yard.
Can it works good on an AR 15 for 100 to 300 yards? And Thank you.
Raypupi15 on Sep 8, 2019
BEST ANSWER: No, it broke on my AR in less than 1 magazine. Get a leupold.
Will this work with a .450 bushmaster?
Steven W on Sep 7, 2019
BEST ANSWER: That is a lot of magnification for a short range caliber. Especially, if you are hunting in timber. I run a 2-7×35 on mine. The lower magnification allows you to get on deer quickly. You can always turn it up if they are farther out. Even at 4 power in thick brush it is hard to find deer.
I have a 1979 Remington speedmaster 22cal. will this scope and mount work good one my rifle?
Mark W on Sep 10, 2019
Any problem with using this scope with the Ruger.22 precision rimfire?
David J on Sep 10, 2019
Will this mount on a picatinny rail ?
Rick H on Sep 12, 2019
BEST ANSWER: The 4-12x44 w/cantilever mount is an excellent choice for a AR10, but I would recommend going up one step in quality, and get the Crossfire 4-12x40 AO, or the 4-12x50 AO if you want to do any long range shooting. Both of these scopes have earned excellent reputations for quality and performance in their price range.
Will this be good for a 6.5 creedmore bolt action?
Walleye on Sep 16, 2019
BEST ANSWER: I would go with regular medium 1" rings. If I wanted to do some shooting at over 750 yards, I'd add a 20 MOA rail. Cantilever mounts are primarily intended for use with AR type rifles, and are generally a bit to high/tall for ideal sight picture on bolt action rifles.
Will this handle a 338 lapua?
Chris Y on Sep 16, 2019
BEST ANSWER: No, I don't think any of the scope companies make left handed models at this time.
Will this work for a 30-30 marlin 336 lever action?
Austin E on Sep 14, 2019
BEST ANSWER: Yes, it would work, but this scope/mount are not best suited for your rifle. Quality 2-7, or 3-9 power scopes are what experienced 336 hunters fine best.
Will this fit on an 1022 best mans friend rifle ?
Bomes on Sep 17, 2019
Will this optic work on an AR10???
Shakey on Sep 17, 2019
Does it come in left handed ?
Gregg F on Sep 15, 2019
What Butler Creek flip-up scope caps will fit this?
Brian B on Sep 15, 2019


There are no reviews for this item. Write Review