I have been checking every day for the last 6 months + for any PSA 7.62 x 39 uppers. Is there any idea when these will come back in stock? I know they have been pumping out aks but I would really like a x39 upper sometime in the next century.
1 Like
Welcome @philabrahamface ! PSA is pumping out product as fast as they can. The website updates every day around 4pm (about the same time the afternoon email goes out). You have to act fast as stuff goes fast!
I’ve seen uppers available almost every time I’ve checked in the last couple weeks. You are looking for the ks47 right?
Just grab a 7.62x39 barrel and bolt and build your own, if you’re referring to AR platform. Just make sure to use a enhanced firing pin and buy some extra extractors. Had them snap on 45 rnds, and others just run and run. Also c-products mags run flawlessly 10, 20, 30. Hope this is helpful.
2 Likes
@philabrahamface Due to the KS47, we haven’t done the AR47 uppers in a while. I will send the suggestion up the chain of command!
1 Like
I have a KS47 Gen1 and it has a few issues that people were complaining about. I have worked around those problems. I would like to buy the Gen2 but you guys have created more problems with the mag overtravel issue. Just sand down the feed lips of the mag and problem solved. In the gen2 due to the design of the bolt now, you have a proprietary part that you can’t get anywhere else. That is not good for the consumer. I do not like proprietary parts the PA10 is bad enough. In my opinion, you guys have totally screwed up the KS47. I really love the rifle but due to design changes I doubt I will buy another one.
1 Like
Thank you I will gladly buy one once produced.
I’ve been tempted to buy the KS47 upper and mount to my mil spec lower but have been told it won’t work 
… even running with a c product mag If this what you’re referring too ? Seen on other forums it does
Nope, won’t work, you’ll put the magazine in it’ll hit the overinsertion tabs, and won’t lock in, won’t even be close to locking in.
You can get them from Rock River Arms, they work just fine, the SKU is AK0032BGRPC, they’re made to order, mine took about a month.
The Gen1 KS47 will work with AR15 lower. Good luck finding one
Very Helpful, thanks! I was looking for a recommendation on 7.62x39 AR magazines.
ive seen a few reviews of the ross defense unimags. I picked up a couple they seem decently made most of the videos ive seen show them to be decently reliable
Awesome! I will check those out as well. Thank you
Edited by GuitarGuy. This is not a buy/sell forum. Thanks.