As with all my ARs I like to have back up parts for emergencies… or just to have on hand in case something decides to abide by Murffy’s law… I have looked and can’t find the replacement parts I need…
Firing pin
extractor and spring and dounut
ejector spring
cam pin
cotter pin
ect…
Now most the time you can find all this in a “Bolt Kit” if you will… but I can’t even find them separately…on the website…Please advise or post part #s Please so I may order them…
Thanks in advance…
Edited to change the Topic name after Pinning it. - Gamecock Operator
Skus:
Cam pin: 507864
Firing Pin: 504167
Retainer pin: 507865
Extractor Rebuild Kit: 7791469
1 Like
Thank you…now just to catch them in stock…I spent better part of 2 hours looking for these…again my thanks…
the sku # for the extractor kit is… 7791369
https://palmettostatearmory.com/psa-pa-10-extractor-rebuil-kit.html
1 Like
I just had idea…need a pinned thread for parts… it would make it easier for people to find them…
just a suggestion.
thanks again.
1 Like
Just buy a second gun, lol. Great idea I want to do same but they don’t sell much in extra parts for the rock.
1 Like
at least a second bcg, get a nitride mpi bcg they are perfect
1 Like
It should be the same. Toolcraft makes the PSA bcgs.
3 Likes
( Specific to FP tip diameters )
FWIW, the 308 BCG’s use a .083 Bolt FP hole, with a .077 FP tip size.
https://palmettostatearmory.com/psa-pa10-308-nitride-bolt-carrier-group-516446490.html
The 6.5CM Dual Ejector uses a .069 Bolt FP hole, with a .068 FP Tip size. Note the FP is Tapered.
https://palmettostatearmory.com/psa-nitride-6-5-creedmoore-bcg-with-double-ejector.html
And the previous 6.5CM BCG single ejector has a SD FP Tip size as well… SD FP Tapered ,Tip sized .067 and Bolt faced hole .069
I have yet to see a Small Diameter Tip Firing pin replacement on PSA’s webpage.
On average the 308 FP tip will measure right around .077"… so it will not work with the dual ejector 6.5CM Bolt.
I think this MIGHT be what you are looking for…it says for the Tool Craft double ejector…
1 Like
I also found this that might be a possibility for the standard back up parts…
it also says for the 308 dual ejector…
1 Like
Is there a way to find out what handguards would work also ?
DPMS LOw is correct as Guitarguy said, but im largely posting here to welcome you to the PSA Forums!!! So welcome! enjoy your stay, and hope you hang around!
1 Like
Thank you a ton, i wish more MFGs curated their own forums it really helps see real world “issues” get fixed and have a community to notate those “fixes” rather than one employee try to answer the thousands of questions a day.
Agree. Hard part with ar10s is that there is no standard industry wide..
you’re welcome.. and i agree.. i used to do this on arfcom in the PSA forums, but i wasnt a mod, just a customer who loved the brand and while psa wasnt really taking care of the forum i decided i’d try to help the best i could.. i got in trouble on arfcom for it.. but i think its what lead me here to be a mod here eventually and the relationship i have with psa now.. so it was well worth it. I Love the products, but the people at psa are great.. I wouldnt trade thier friendship and comradery for the world.
1 Like