Measuring neck diameter with calipers can be unreliable. Factors such as a small burr on the case mouth, an incorrect angle of the calipers or excessive tension can lead to inaccurate readings. Improper neck tension may complicate projectile insertion or pose safety risks if the neck is too loose. Our gauge addresses these issues effectively. It can remove minor burrs during insertion and maintains the round shape of the mouth, unlike calipers. This gauge is designed for 224 and 308/310 diameter brass, accommodating calibers such as .223 Remington, 5.56x45mm, 7.62mm, .308 Cal, .30/06, 7.62x39mm, among others. On the 308/310 side, the gauge diameters are .299, .302, .305, .308, with an additional smaller step at .310 for 7.62x39mm.

The optimal neck tension for a .308 diameter is indicated when the gauge reaches the second or third stop
Apply consistent, moderate force during gauging to accurately confirm alignment with the designated stop point
The .224 side operates analogously to the .308, where the case mouth should typically align with the second or third gauge stop, preventing it from extending fully to the handle
The case mouth gauge provides an efficient and precise method for evaluating neck sizing and neck tension parameters
This is a tool I developed for personal use and it has become indispensable to me
If the gauge cannot be inserted, the neck tension is excessive and may lead to seating issues
Conversely, if the .308 brass mouth slides completely to the .310 stop, it is too loose to securely retain a bullet
For a 7.62x39mm firearm, a .32 Cal pistol or a lead-cast .308, the projectile diameter typically ranges from .310 to .312 inches
Consequently, an additional small .310 step is provided for these specifications

Report incorrect product description

Reviews

Q & A

Retail Stock

Compliance

Shipping Restrictions

It is the customer’s responsibility for understanding state laws regarding all purchases made. For a comprehensive list of all Shipping Restrictions, please refer to our Shipping Restrictions By State Page found Here.

All NFA Rules Apply

These items are controlled by the U.S. Government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.

WARNING: Handling firearms or firearms parts can expose you to lead and other petroleum products known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands thoroughly after handling. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).