NOTICE FOR OREGON MAGAZINE & FIREARM ORDERS
Until further legal notice, PSA will ship All Magazine Orders to Oregon with 10+ Capacity placed before Midnight, December 11th, 2022 PST.
Until further legal notice, PSA will also ship All Firearm Orders to Oregon placed before Midnight, January 2nd, 2023 PST.
It is the responsibility of the customer to ensure Oregon FFL Firearm Transfers can be facilitated during this time-frame.
All Oregon Orders & Refunds are at the discretion of Palmetto State Armory.

Out of stock
Daniel Defense DDM4 V1 .223 Rem/5.56 Semi-Automatic AR-15 Rifle - 02-050-15027
Out of stock

Daniel Defense DDM4 V1 .223 Rem/5.56 Semi-Automatic AR-15 Rifle - 02-050-15027

Details
SKU 787575
Brand Daniel Defense
Model Number 05015027
UPC 815604015479
Customers must read Compliance Information before purchasing.
Handling firearms or firearms parts can expose you to lead and other petroleum products known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands thoroughly after handling. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

Product Details

Details

  • Series/Collection: DDM4 V1
  • Action: Semi-Automatic
  • Magazine Type: DD
  • Trigger Type: Standard
  • Muzzle Type: Threaded, Flash Suppressor
  • Magazine Capacity: 30+1
  • Caliber/Gauge: 223 Remington/5.56x45mm NATO
  • Twist Rate: 1:7"
  • Orientation: Right
  • Safety: Ambidextrous
  • Sight: A2
  • Barrel Material: Chrome Molybdenum Vanadium Steel
  • Receiver Material: Cold Hammer Forged
  • Barrel Length: 16"
  • Overall Length: 32-1/4" to 35-7/8"
  • Weight: 6.7 lb
  • Barrel Type: M4 Profile
  • Gas System: Carbine Length
  • Thread Size: 1/2-28

Features

The DDM4V1, the original Daniel Defense Rifle, is built with a Cold Hammer Forged 16" M4 Profile barrel with a Carbine gas system. It comes installed with our proprietary front sight base which is precision CNC machined from a solid billet of 4140 steel. This FSB features a serrated curved design to minimize glare and is salt bath nitride treated minimizing corrosion and wear. The DDM4 Rail 12. 0 FSP allows the operator to mount a weapon light or aiming device forward of the front sight for optimal ergonomics and a clear line of sight. Quick disconnect attachment points are integrated to the front and back on both sides of the rail for fully ambidextrous sling attachment. The new independently ambi GRIP-N-RIP Charging Handle accommodates left-and right-handed shooters and is engineered for suppressed fire, with anti-gas features that redirect gas flow upward and away from the face and operator. This rifle also comes with the newly designed, rugged and comfortable Daniel Defense buttstock and pistol grip.

Features:

  • Lower receiver - Mil-Spec with enhanced flared magazine well and rear receiver QD swivel attachment point, CNC machined from 7075 T6 aluminum, type III hardcoat anodized
  • Upper receiver - Mil-Spec with indexing marks and M4 feed ramps, CNC machined of 7075 T6 Aluminum, type III hardcoat anodized
  • Barrel - chrome moly vanadium steel, cold hammer forged, 1:7 twist, 18 inch government profile, mid-length gas system, chrome lined, MP tested, and Mil-Spec heavy phosphate coated
  • Gas system - front sight base CNC machined from 4140 steel and salt bath nitride finished, carbine length, direct impingement
  • Muzzle device - Daniel Defense flash suppressor, 17-4 PH stainless steel, salt bath nitride finished
  • Bolt carrier group - M16 profile, Mil-Spec MP tested, chrome lined, properly staked gas key
  • Buffer - H buffer
  • Sights - Daniel Defense A1. 5 fixed rear sight - CNC machined from 6061 T6 aluminum, type III hardcoat anodized - Daniel Defense FSP - CNC machined from 4140 steel, salt bath nitride finish
  • Handguard - Daniel Defense DDM4 Rail 12.0 FSP, CNC machined of 6061 T6 aluminum, type III hardcoat anodized
  • Charging handle - Grip-N-Rip charging handle, body CNC machined of 7076 T6 aluminum, handles and latch CNC machined of 6061 T6 aluminum, heavy duty stainless steel roll pins, type III hardcoat anodized
  • Receiver extension - 6-position Mil-Spec 7075 T6 aluminum
  • Buttstock - Daniel Defense buttstock, glass filled polymer with soft touch over molding
  • Pistol grip - Daniel Defense pistol grip, glass filled polymer with soft touch over molding
  • Grip - Daniel Defense vertical grip, glass filled polymer with soft touch over molding
  • Rail panels - Daniel Defense rail panels made from Santoprene, heat resistant to 300 deg F
  • Made in the USA

Reviews

Q & A

Compliance

All NFA Rules Apply.
These items are controlled by the U.S. Government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.

Magazines will be removed from firearms when shipping to states with magazine capacity restrictions.

Handling firearms or firearms parts can expose you to lead and other petroleum products known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands thoroughly after handling. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).
Loading...