I guess the Dagger does not fit in a Kydex holster for a standard Glock 19 Gen 3?
I put together an 80% Arms GST-9 and it fits in a standard G-19 holster just fine.
I would think the Dagger would slide right into one as the specs are pretty close, where is the interference or clearance problem?
Look at the profile/shape of the trigger guards. They are different.
2 Likes
The R&R Glock 19 OWB light bareing holster fir the Olight PL mini Valkyrie 2 fits the dagger extremely well
3 Likes
The hight from the top of the slide to the bottom of the accessories rail is slightly taller on the dagger than a regular Glock 19
1 Like
I just got an R&R OWB light bareing holster for my dagger it was the Glock 19/23/32 Olight PL mini Valkyrie 2 fit and it’s a great fit.
The light bearing holsters seem to contact the light and top of the slide more than the trigger guard and frame. My non light bearing r and r owb holster was extremely tight. Like many other Glock holsters. I had to return it. It rubbed on the frame and the trigger guard. I am sure I could have taken a hair dryer to it but it isn’t my carry gun so there isn’t an immediate need for me. Hopefully r and r/outlaw will make one for the dagger. Please write them an email to request it. The more request the more likely they are to make it. That goes for all holster manufacturers. The more people you can get to send an email asking for one the faster they will make it a reality.
Relentless Tactical. These are not preformed and are made to fit several different makes and models, but G19 is the main basis for the design. Available on their website or Amazon.
6 Likes
Excellent Minimalist Kydex Holster - Fits the PSA Dagger like a GLOVE!!!
$40 Shipped/off Amazon
FDO Industries -Formerly Fierce Defender- IWB Kydex Holster Polymer 80 Compact (PF940C) (19/23) -The Winter Warrior Series -Made in USA- (Black)
1 Like
I just got this tonight so I will update if I find any problems, but this PoLe.Craft IWB kydex holster can be found on amazon for under $20 (I paid $17.99) 
It fits snug, the trigger is fully covered, seemed worth a try.
3 Likes
Hello. Are there any dagger holsters with molle attachments?
Not that I have seen.
I just got my FDO Industries (used to be Fierce Defender) Winter Warrior series IWB kydex holster, advertised for a P80 and fits the Dagger perfectly. Good retention with adjustment screw. It’s got a curve on the trigger guard area to match the P80 frame but since it’s an open split in that spot, it works perfectly. I’m going to start looking for P80 holsters rather than G19. The trigger guard is the same shape except for that bottom curve.
FDO Industries -Formerly Fierce Defender- IWB Kydex Holster Polymer 80 Compact (PF940C) (19/23) -The Winter Warrior Series -Made in USA- (Black) https://smile.amazon.com/dp/B07RGX7QJF/ref=cm_sw_r_cp_api_glt_fabc_Q19QYNJP1TGATBVRH65D?_encoding=UTF8&psc=1
1 Like
Hey all. If you have a pistol light and looking for a compatible holster, an ANR CZp07 holster works perfectly. The non light bearing holster works with it as well, you would just have to loosen the screws a little.
I hope when the micro is released there is more holster support for it than there was the dagger. You would think that with as many that have been sold, there would be more support.
2 Likes
Pretty much all of my holsters are cut for glock 19 with lights (mainly TLR1s but I use a Olight pl valkyrie 2 or PL pro with those. If I say fits with TLR1 its because the holster is cut for that but I use the olights in them).
T-rex sidecar 1.0 and 2.0 with TLR1 size lights fit fine.
T-rex Ragnarok with TLR1 fits fine.
LLOD associate V2 for olight pl mini 2 fits fine.
Safariland 6379RDS-2832 fits with a TLR1 size light.
Las concealment ronin 3.0 with Olight pl2/pl pro is tighter but can be loosened,
Tenicor SagaX Lux2 is tight but you can loosen it so it does fit if you use with other glocks.
We the people iwb and owb fit with tlr1.
3 Likes
My Ragnarok is tight with an X300U. With Dagger sales approaching 50,000, I’d think we could encourage Lucas to offer holsters specifically designed for the Dagger. Although, I’m sure it’s ultimately the number of T.Rex Arms customers asking for Dagger-specific holsters and not the Dagger sales alone. I’ve certainly asked. Hopefully, others will as well.
My Dagger fits in a Blackhawk Serpa but it’s very snug. It appears the frame just above the rail is the tight spot. Noticed this with a Vedder holster, too. Has anyone tried to take a little material off the frame to see if it’s more compatible with other holsters? I may try this week.
I wish someone would perform a detailed analysis of a Dagger vs an OEM Glock G19 from the perspective of holster compatibility. What are the exact differences that are impacting compatibility? To your point, are there modifications we could make (or PSA could make with a next generation) to the Dagger frame in order to improve compatibility?
There’s definitely something going on in the area of the Dagger accessory rail. I run a SureFire X300U-A on my Glock frames, however, an X300U-A doesn’t fit the Dagger accessory rail worth a hill of beans. I’m forced to run an X300U-B.
If we could identify all of the pain points, we could probably find a shop to offer the needed modifications as a service.
1 Like
Hillier Holster has IWB and OWB options made specific to the Dagger. Unfortunately they don’t have one yet for their Plus One appendix carry with mag carrier at this time. I bought the OWB version and it fits like a glove and is already ready for suppressor height sights and RMR cut out. The bottom is open for threaded barrel as well. I’ll know how that part fits when my BCA threaded barrel arrives soon.
Hilliker Holster Company
5 Likes