Out of stock
Heckler & Koch MR556 .223 Rem/5.56 Semi-Automatic AR-15 Rifle - MR556LC-A1
Out of stock

Heckler & Koch MR556 .223 Rem/5.56 Semi-Automatic AR-15 Rifle - MR556LC-A1

Details
SKU 775274
Brand Heckler and Koch
Model Number MR556LCA1
UPC 642230254367
Customers must read Compliance Information before purchasing.
This product is fulfilled by a PSA Partner and shipping times may vary.
Handling firearms or firearms parts can expose you to lead and other petroleum products known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands thoroughly after handling. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

Product Details

Details

  • Series/Collection: MR556
  • Action: Semi-Automatic
  • Stock Type: Adjustable/Retractable Buttstock
  • Trigger Type: 2-Stage
  • Muzzle Type: Muzzle Brake
  • Magazine Capacity: 30
  • Caliber/Gauge: 223 Remington/5.56x45mm NATO
  • Twist Rate: 1:7"
  • Orientation: Right
  • Safety: Ambidextrous
  • Sight: Rail Mounted Front and Rear
  • Barrel Material: Cold Hammer Forged
  • Receiver Material: Aluminum
  • Barrel Finish: Black
  • Receiver Finish: Black
  • Stock Finish: Black
  • Barrel Length: 16-1/2"
  • Overall Length: 33.9" to 37.68'
  • Weight: 8.6 lb

Features

A direct descendent of the HK416, the MR556A1 is a semi-automatic rifle developed by Heckler & Koch as a premium level commercial/civilian firearm with match rifle capability. Like the HK416, the MR556A1 is a major product improvement over conventional AR-type carbines and rifles. The MR556A1 uses the HK proprietary gas piston operating system, employing a piston and a solid operating pusher rod in place of the gas tube normally found in AR15/M16/M4-style firearms. This method of operation virtually eliminates malfunctions that are common to direct impingement gas systems since hot carbon fouling and waste gases do not enter the receiver area. This is the same key feature critical to the success of the HK416 rifles used by leading military and law enforcement customers. The MR556A1 is produced in the USA using American and German made components. The MR556A1 uses many of the same assemblies and accessories originally developed for the HK416 including the HK free-floating four-quadrant rail system. The HK ree floating rail system (FFRS) handguard has four Mil-Std -1913 Picatinny rails and allows all current accessories, sights, lights, and aimers used on M4/M16-type arms to be fitted to the MR series. The HK rail system can be installed and removed with simple tools and returns to zero when reinstalled. The MR556A1 also has a Picantinny rail machined into the top of its upper receiver for mounting optics and mechanical sights. Unlike earlier prototypes, major subassemblies, including the MR556A1 upper receiver/barrel assembly, are fully interchangeable with other high quality AR-style firearms. MR556A1 upper receiver kits can be used to retrofit competing legacy AR systems. Like the famous HK416, the MR556A1 uses a German-made barrel produced by Heckler & Koch's famous cold hammer forging process. The highest quality steel is used in this unique manufacturing process producing a barrel that provides superior accuracy and long service life. But unlike the HK416, the MR556A1 does not use a chrome-lined barrel. Chrome-lining can sometimes mask bore imperfections and negatively affect accuracy. For the new series of Heckler & Koch semi-automatic MR rifles, HK designers and engineers believe best accuracy comes with an unlined bore. Used with the HK Free Floating Rail System, the barrel does not touch the handguard, ensuring the barrel is truly free-floating for maximum accuracy. The unchromed barrel has an internal profile of 6 lands and grooves with a 1-in-7 inches (178 mm) twist. It is also moderately swagged with a slightly smaller internal diameter at the muzzle end than the chamber end. This feature has a positive effect on bullet accuracy and velocity. The thick, heavy contour 16-1/2 inches MR556A1 barrel also contributes to its excellent accuracy. A precise enhanced 2-stage trigger adds significantly to the accuracy of the MR556A1 and an extended latch charging handle makes operating the rifle with a telescopic sight easier. The retractable buttstock can be locked into a solid, non-moving position by tightening an Allen screw in the bottom of the stock. Special target rifle takedown pins ensure the upper and lower receivers are firmly mated for accurate performance. Designed to function with a wide variety of high quality 5.56x45mm ammunition, the MR556A1 uses a C.I.P. dimensioned chamber (a chamber with dimensions specified by the Commission Internationale Permanente). The MR556A1 also functions reliably with most quality caliber .223 Remington ammunition. The MR556A1 is being produced with the same commitment to quality as German-made HK firearms. By using joint U.S./German manufacturing, Heckler & Koch leverages the relative strengths of two continents to make the preeminent AR-type firearm, combining the designs innovations of the USA and Germany into one new product. The MR556A1 rifle includes a 10 or 30 round steel magazine, set of Troy Industries Micro mechanical sights, HK multi-tool, lock, and case.

Reviews

Q & A

Retail Stock

Compliance

All NFA Rules Apply.
These items are controlled by the U.S. Government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Handling firearms or firearms parts can expose you to lead and other petroleum products known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands thoroughly after handling. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).
Loading...