PSA 10.5 upper with bcg

More Views

PSA 10.5" 5.56 NATO 1:7 Nitride 9" Lightweight M-Lok Freedom Upper With BCG & CH - 516446396

TEMPORARILY OUT OF STOCK

Quick Overview

free shipping Free Shipping applies to this item only and not the entire order.

It is the customer's responsibility to be aware of all applicable laws and regulations regarding the purchase and ownership of uppers with a barrel length of less than 16". Federal NFA regulations are applicable to this item.

WARNING: This product can expose you to the chemical lead, which is known to the State of California to cause cancer and reproductive harm. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

SKU: 516446396
UPC: 516446396
MFR#: 516446396

Barrel Length: 10.5"
Barrel Profile: A2
Barrel Steel: Chrome Moly Vanadium
Barrel Finish: Nitride
Chrome Lining: No
Muzzle Thread: 1/2-28
Chamber: 5.56 NATO 
Twist Rate: 1:7
Barrel Extension: M4
Diameter at Gas Block: .750
Gas Block Type: Low-profile
Muzzle Device: A2 Flash Hider
Receiver Material: Forged 7075 T6
Receiver Type: A3
Handguard Type: Lightweight M-Lok 9" Free Float Rail
Bolt Carrier Group Included: Yes
Bolt Steel: Carpenter 158
Bolt Carrier Profile: Full-auto
Charging Handle Included: Yes
Overall Length: 19.5"

Add To:

Barrel:  10.5" Chrome Moly vanadium steel, melonite treated for durability and chambered in 5.56 NATO with a 1 in 7" twist rate. Carbine length gas barrel is finished off with a PSA 9" Lightweight M-Lok Rail, a low profile gas block and an A2 Flash hider. 

Upper: Forged 7075-T6 A3 AR upper is made to MIL-SPECS and hard coat anodized black for durability. These uppers are made for us right here in the USA by a mil-spec manufacturer. 

Bolt: Bolt is made of Mil-spec shot-peened Carpenter 158 steel. Gas key is secured with grade 8 fasteners and staked per mil-spec. Bolt carrier is parkerized outside, and chrome lined inside.

SKU: 516446396
SKU 516446396
Brand Palmetto State Armory
Daily Deal No
Daily Deal Expires No
Unit Price N/A
Youtube Video No
Free Shipping? Yes
Free Shipping Qty Label No
Free Shipping Qty No
SKU: 516446396

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 17 questions Browse 17 questions and 37 answers
can I put this on my hi-point?
nite f on Jan 10, 2019
BEST ANSWER: No, these only fit on Jennings
Is the barrel 4140 or 4150 steel?
Mark H on May 14, 2018
BEST ANSWER: I would like to know as well
What is the gas system length?
Nathan M on Jun 2, 2018
BEST ANSWER: carbine length
Why can’t you guys keep anything in stock? Are we going out of business?
Atx A on Nov 30, 2018
BEST ANSWER: likely due to influx of YouTubers doing videos hence why I am here
I understand the gasblock is not adjustable, but has anyone run a suppressor on these uppers? Results?
New AR Pistol on Oct 25, 2018
PSA 10.5
PSA 10.5" 5.56 NATO 1:7 Nitride 9" Lightweight M-Lok Freedom Upper With BCG & CH - 516446396
PSA 10.5
PSA 10.5" 5.56 NATO 1/7 Nitride 9" Lightweight M-Lok Freedom Upper With BCG & CH
PSA 10.5
PSA 10.5" CHF Carbine Length 5.56 NATO 1:7 9'' Lightweight M-Lok Railed Upper - Without BCG or CH - 5165448674
BEST ANSWER: Yes, I routinely run a SilencerCo 7.62 SpecWar (with flash-hider QD) on the 10.5" nitride upper. No problems at all.
This can be installed as a pistol right?
V L on Nov 18, 2018
BEST ANSWER: Yes I bought it for my AR-15 pistol..
Can you replace the M-Loc rail system to a quad rail? If so, would it be a free float or drop in? Thanks!
Chris M on Nov 6, 2018
Is the flash hider pinned in place?
Joseph on Jan 13, 2019
BEST ANSWER: No. I swapped mine out. Normally they only pin 14.5 inch barrels to keep them over the NFA limit.
Appears so but are there MLok slots at 6 o'clock?
Wes H on Oct 29, 2018
BEST ANSWER: Yes. 6 o'clock, 9 o'clock, and 3 o'clock. Great upper. Bought it last Christmas.
I'm interested in purchasing the 516446396 barreled upper. Could I get it with a YHM quad rail instead of the M lok?
George G on Oct 20, 2018
BEST ANSWER: Probably not. You would have to change the rail yourself after purchase.
Are there any problems with fit on lowers purchased from other vendors like, primary, or gun deals etc...?
Andre C on Apr 14, 2019
BEST ANSWER: I run all different kinds of lowers with my psa uppers, and have never had a problem with fit
Will this fit the magpul lower kit you guys make?
Steven H on Apr 8, 2019
BEST ANSWER: Yes it does, this is one of the best pistol kits made. Extremely accurate.
Will the upper fit a DPM ower ?
David L on Apr 8, 2019
BEST ANSWER: DPMS lowers should fit. DPMS Panther lowers are advertised to fit. Color match and how tight they will fit is another matter and always is with different manufacturers.
Does PSA measure the headspace prior to shipping since it includes the bcg??
Austin on May 20, 2019
Is the Barrel itself made in the USA?
aleigh on Apr 10, 2019
I'm interested in purchasing the 516446396 barreled upper. Could I get it with a YHM quad rail instead of the M lok?
George G on Oct 20, 2018
I have 18 in. barrel Ruger MPR with rifle length gas system and want to swap out the stock Ruger upper with shorter barrel as shown above. Do I need to change the buffer weight on the lower receiver?
John K on Oct 11, 2018

Reviews

4.6 / 5.0
30 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
25
2
1
1
1
Very pleased
Happy with purchase. Put it on a Anderson lower, everything matched up tight and color matched also. Glad I went with 10.5"
June 22, 2019
Purchased
3 months ago
Flawless. Indescribable felling firing the first round from my first build of my first ar-15 and have it operate so flawlessly. 200 rounds in and not a single hitch.
June 20, 2019
Purchased
3 months ago
Perfect
Works perfectly out of box. No complaints and looks very sharp.
User submitted image
User submitted image
June 17, 2019
Purchased
3 months ago
Great SBR upper
Filed the paperwork for the SBR, this upper was perfect. I added an aimpoint PRO, and an angled foregrip

I am pleased with the groups at 50 yards with 62 grain green tip. Not going to lie and say they were MOA...maybe 2-2.5, but I know if I had more experience and higher quality ammo it would be tighter. I don’t expect this to be a tack driver, this is my SHTF gun. It runs and it runs well.

I have built other 10.5” uppers but this one stays on the lower, good job PSA.
June 15, 2019
Awesome upper
Works flawlessly very accurate! The only negative is that the rail seemed to not be loctited and after a few rounds the rail would start moving down the barrel on its own. PSA just has to make sure that is taken care of. But it functions perfect other wise.
June 13, 2019
Purchased
3 months ago
good upper
I needed a pistol ar for my truck when we travel. It is accurate and well made.good price .happy with purchase.
May 22, 2019
Purchased
4 months ago
Good grouping, Handguard sucks
Shot 60 rounds through it nice groups, but the handguard sucks. No anti-rotation tabs and after only 60 rounds the handguard slid forward no thread locker on the screws. I have a PSA 7.5 300 blk upper with the other style of clamp handguard that uses 5 screws and has anti-rotation tabs that were a lot better designed than this
April 25, 2019
SHOT 6-8" GROUPS @ 25 YARDS ! : - (
I MUST ASSUME THEY DO NOT TEST THERE UPPERS WITH EVEN 3 ROUNDS OF AMMO BEFORE SHIPPING THEM OUT. THIS UPPER SHOT 6 - 8 " GROUPS OF QUALITY AMMO @ 25 YEARS WITH A BIPOD ON A BENCH. THAT IS JUST SAD AS ALL GET OUT. - HAD TO SEND IT BACK BUT I AM OUT 80 ROUNDS OF AMMO I USED TO SEE IF IT WAS MY OPTICS OR THE BARREL. ONLY REASON IT GOT 1 STAR IS BECAUSE THE UPPER RAN.
April 11, 2019
Purchased
8 months ago
I want one in 7.62X39 if you ever stock them again.
200 rounds and no malfunctions. More accurate than I thought it would be.
February 15, 2019
Purchased
6 months ago
10.5 upper5.56
Put this upper on top of aero pistol lower worked great loved it so much I ordered a 300 blackout and it also worked great.
February 13, 2019
Purchased
7 months ago

Customers Who Viewed This Item Also Viewed