Out of stock
PSA 10.5" CHF 5.56 NATO 1/7 12" Slant M-Lok MOE EPT SBA3 Pistol Kit
Out of stock

PSA 10.5" CHF 5.56 NATO 1/7 12" Slant M-Lok MOE EPT SBA3 Pistol Kit

Details
SKU 5165492121
Brand Palmetto State Armory
It is the customer's responsibility to be aware of all applicable laws and regulations regarding the purchase and ownership of uppers with a barrel length of less than 16". Federal NFA regulations are applicable to this item.
Handling firearms or firearms parts can expose you to lead and other petroleum products known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands thoroughly after handling. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

Product Details

Details

  • Barrel Length: 10.5"
  • Gas System: Carbine Length
  • Barrel Profile: A2 Style
  • Barrel Steel: Cold Hammer Forged Chrome Moly Vanadium
  • Barrel Finish: Phosphate
  • Chrome Lining: Yes, bore and chamber
  • Muzzle Thread: 1/2-28
  • Chamber: 5.56 NATO
  • Twist Rate: 1:7
  • Barrel Extension: M4
  • Diameter at Gas Block: .750
  • Gas Block Type: Low Profile
  • Muzzle Device: PSA Fluted Flash Can
  • Receiver Material: Forged 7075 T6
  • Receiver Type: M4
  • Hand guard Type: PSA 12" Slant End Lightweight M-Lok
  • Bolt Carrier Group Included: Yes
  • Bolt Steel: Carpenter 158
  • Bolt Carrier Profile: Full-Auto
  • Charging Handle Included: Yes
  • Build Kit: PSA MOE EPT SBA3 Lower Build Kit, Black

Features

Barrel: Barrel is made for Palmetto State Armory by FN Manufacturing using their proprietary blend of hammer forged chrome molly vanadium that is referred to as "Machine Gun Steel" by virtue of its use in FN's M249 and M240 weapons.   The hammer forging process work hardens the steel, making it more durable.  In addition, the chrome process for the bore allows for a lining almost twice as thick as a standard M16 for enhanced durability.  Chambered in 5.56 NATO, with a 1:7 twist, M4 barrel extension with extended feed ramps, and a carbine gas system.   The barrel has an A2 style profile, is Mil-spec phosphate coated, and MP/HP tested.  The upper is finished off with a low-profile gas block, a Palmetto State Armory 12" Slant End Lightweight M-Lok free float,  and a PSA Fluted Flash Can.

Upper: Forged 7075-T6 A3 AR upper is made to MIL-SPECS and hard coat anodized black for durability. Featuring a mil-spec finish, these uppers are made for us right here in the USA by a mil-spec manufacturer.

Flash Can: Palmetto State Armory's Fluted "FLASH CAN". This is a solid 6061 aluminum device that is designed to direct muzzle gases and the muzzle flash forward. Threaded 1/2x28 for 5.56 NATO. Black military-style hard anodizing. THIS DEVICE IS NOT DESIGNED TO REDUCE RECOIL, MUZZLE RISE, OR FLASH SIGNATURE. This device is designed to direct gasses and noise forward away from the shooter and enhance the weapon's appearance.

Bolt: Bolt is made of Mil-spec shot-peened Carpenter 158 steel. Gas key is secured with grade 8 fasteners and staked per mil-spec. 

Build Kit: A high quality lower build kit with everything you need to assemble your AR-15 lower into a pistol. Features Enhanced Polished Trigger (EPT), Magpul Grip, Magpul Trigger Guard, and black oxide coated hammer and trigger springs. Also includes SB Tactical SBA3 Adjustable Pistol Brace, castle nut, latch plate, carbine buffer spring, 5 positioning mil-spec buffer tube, and standard carbine buffer.

Reviews

Q & A

Retail Stock

Loading...