Out of stock
PSA 16" Carbine-Length M4 5.56 NATO 1/7 Nitride MOE EPT Rifle Kit & Rear MBUS - 516447449
Out of stock

PSA 16" Carbine-Length M4 5.56 NATO 1/7 Nitride MOE EPT Rifle Kit & Rear MBUS - 516447449

Details
SKU 516447449
Brand Palmetto State Armory
Handling firearms or firearms parts can expose you to lead and other petroleum products known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands thoroughly after handling. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

Product Details

Details

PSA 16" Carbine-Length M4 5.56 NATO 1/7 Nitride MOE EPT Rifle Kit & Rear MBUS - 516447449

  • Barrel Length: 16"
  • Gas System: Carbine-Length
  • Barrel Profile: M4
  • Barrel Steel: 4150V Chrome Moly
  • Barrel Finish: Nitride
  • Chrome Lining: none
  • Muzzle Thread: 1/2-28
  • Chamber: 5.56 NATO
  • Twist Rate: 1 in 7"
  • Barrel Extension: M4
  • Diameter at Gas Block: .750"
  • Gas Block Type: F-marked Front Sight Base
  • Muzzle Device: A2 Flash Hider
  • Receiver Material: Forged 7075 T6
  • Receiver Type: M4
  • Hand guard Type: Magpul MOE Black Handgaurds
  • Bolt Carrier Group Included: Yes
  • Bolt Steel: Carpenter 158
  • Bolt Carrier Profile: Full Auto
  • Charging Handle included: Yes
  • Rear Sight: Magpul MBUS Rear Flip-Up Sight
  • Overall Length: 24.5"

Features

Barrel: Nitride finished 4150V chrome moly vanadium 16" barrel. Chambered in 5.56 NATO, with a 1:7 twist, M4 barrel extension, and a carbine-length gas system. this M4 barrel is is finished off with Magpul MOE carbine-length handguards, F-Marked gas sight base, and A2 flash hider.

Upper: Forged 7075-T6 A3 AR upper is made to MIL-SPECS and hard coat anodized for durability. These uppers are made for us right here in the USA by a mil-spec manufacturer.

Bolt: Full-auto profile bolt carrier group. Milspec Carpenter No. 158® steel bolt, Shot Peened, High pressure tested, Mag particle inspected,  Gas Key Hardened to USGI Specifications, Fastened with Grade 8 screws, and Staked Per Mil-Spec.  8620 steel M-16 profile carrier is chrome lined and phosphate coated.

Build Kit: PSA EPT MOE Lower Build Kit

Includes Magpul MOE Stock,  Pistol grip, and trigger guard, Palmetto State Armory EPT  Lower Parts Kit and Mil-Spec diameter 6-position buffer tube assembly.

EPT Lower parts kit upgrades the standard combat-style fire control group with a single-stage, target-style,  fire control group with polished contact surfaces and a electroless nickel coating.

Everything you need to finish your stripped lower!

Includes: Magpul® MBUS Rear Sight, Black

Reviews

Q & A

Retail Stock

Warranty

AMERICAN MADE. FOR LIFE.

Flag

Full Lifetime Warranty.

Palmetto State Armory firearms are covered by an industry leading Full Lifetime Warranty. This extends beyond the original purchaser. We want the person who bought a great quality firearm at an excellent price to have comfort in knowing that no matter what, the firearm can be fixed at no additional cost.

This includes shipping both ways.

We strive for excellence all the way through production and hope customers never have to use this warranty but we also pride ourselves in 99% non-repair/return ratio. It is there for peace of mind so that the consumer can be confident in their purchase. Should the consumer ever need to contact us regarding a repair under the warranty, simply use our contact form or give us a call at (803) 724-6950.

Palmetto State Armory firearms and parts are backed by our Full Lifetime Warranty. Our PSA firearms and parts are warranted to be free from defects in materials and craftsmanship for the serviceable lifetime of the firearm or part.

For the Life of our product

The liability of Palmetto State Armory under this warranty shall be limited solely to the obligation to repair or replace the firearm/part or defect at its discretion, and to pay transportation and insurance charges for return of the firearm to the owner for a rightful warranty claim. This warranty is transferable for the serviceable lifetime of the firearm or part. Modification of firearm will void this warranty. This warranty does not cover normal wear or any damage resulting from careless handling, neglect, repairs and adjustments, corrosion, improper, substandard or defective ammunition.

What we don't cover

Under no circumstances shall Palmetto State Armory be responsible for incidental or consequential damages with respect to economic loss or injury to property, whether as a result of express or implied warranty, negligence or otherwise. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. Palmetto State Armory will not be responsible for the results of careless handling, unauthorized adjustments, defective, low-quality, reloaded, or improper ammunition, corrosion, neglect, ordinary wear and tear, or unreasonable use.

Initiating a claim

To initiate a Warranty claim, call Palmetto State Armory Customer Service:

Hours: Monday through Friday, 9am - 6pm EST Email: Contact Form
  1. Customer service will issue an RMA number to allow for the return of the firearm.
  2. Warranty claims must have this RMA filled out, and included in the box with the firearm or part.
  3. The firearm or part concerned must be shipped using the prepaid label our representative emails to you.

Palmetto State Armory will pay shipping and insurance charges for the return of a firearm or part to its owner or FFL, if the related claim is a proper claim for warranty work. If Palmetto State Armory is unable to fix the original serial number, a new one will be sent out, but must go to an FFL for transfer back to the customer. Another background check will be completed at the time of transfer. Palmetto State Armory is not responsible for transfer fees at the FFL.

Loading...