PSA 16" carbine-length ar 15 moe kit.

More Views

PSA 16" Carbine-Length 5.56 NATO 1/7 Nitride MOE EPT Freedom Rifle Kit with Rear MBUS, Flat Dark Earth

In stock

Special Price $ 349.99

Regular Price: $ 579.99

Quick Overview

WARNING: This product can expose you to the chemical lead, which is known to the State of California to cause cancer and reproductive harm. For more information go to (CA Health and Safety Code Section 25249.6).

SKU: 5165449135
UPC: 5165449135
MFR#: 5165449135


Gas System: Carbine-Length
Barrel Profile: M4
Barrel Steel: 4150V Chrome Moly
Barrel Finish: Nitride
Chrome Lining: None
Muzzle Thread: 1/2-28
Chamber: 5.56 NATO
Twist Rate: 1 in 7"
Barrel Extension: M4
Diameter at Gas Block: .750"
Gas Block Type: F-marked Front Sight Base
Muzzle Device: A2 Flash Hider
Receiver Material: Forged 7075 T6 Aluminum
Receiver Type: M4 Flat Top
Handguard Type: Magpul MOE Handguards, Flat Dark Earth
Stock: Magpul MOE Adjustable Stock, Flat Dark Earth
Grip: Magpul MOE Pistol Grip, Flat Dark Earth
Bolt Carrier Group Included: Yes
Bolt Steel: Carpenter 158
Bolt Carrier Profile: Full Auto
Charging Handle Included: Yes
Rear Sight: Magpul MBUS Rear Flip-Up Sight, Black
Overall Length: 24.5"

Add To:

Barrel: Nitride finished 4150V chrome moly vanadium 16" barrel. Chambered in 5.56 NATO, with a 1:7 twist, M4 barrel extension, and a carbine-length gas system. Barrel is is finished off with Magpul MOE Carbine-length handguards in Flat Dark Earth, F-Marked gas sight base, and A2 flash hider.

Upper: Forged 7075-T6 A3 AR upper is made to MIL-SPECS and hard coat anodized for durability. These uppers are made for us right here in the USA by a mil-spec manufacturer.

Bolt: Full-auto profile bolt carrier group. Milspec Carpenter No. 158® steel bolt, Shot Peened, High pressure tested, Mag particle inspected,  Gas Key Hardened to USGI Specifications, Fastened with Grade 8 screws, and Staked Per Mil-Spec.  8620 steel M-16 profile carrier is chrome lined and phosphate coated.

Build Kit: PSA EPT MOE Lower Build Kit, Flat Dark Earth

Includes Magpul MOE Stock,  Pistol grip, and trigger guard, Palmetto State Armory EPT  Lower Parts Kit and Mil-Spec diameter 6-position buffer tube assembly.

EPT Lower parts kit upgrades the standard combat-style fire control group with a single-stage, target-style,  fire control group with polished contact surfaces and an electroless nickel coating.

Everything you need to finish your stripped lower!

Includes: Magpul® MBUS Rear Sight, Black

SKU: 5165449135
SKU 5165449135
Department Uppers
Brand Palmetto State Armory
Daily Deal No
Daily Deal Expires No
Unit Price No
Youtube Video No
Free Shipping? No
Free Shipping Qty Label No
Free Shipping Qty No
SKU: 5165449135

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 12 questions Browse 12 questions and 29 answers
I ordered this kit and it didn’t come with the rear site? I tried emailing you guys but never got a response please reply
Chad L on Dec 15, 2018
BEST ANSWER: they don't come with a rear site.
Is this a carbine length or mid length gas system? The listing , and description contradict one another.
Jank on Sep 17, 2018
BEST ANSWER: This is a carbine length gas system as stated and pictured.I didnt see any contradiction in the description.
Can this be assembled for someone left handed?
Derek on Dec 30, 2018
BEST ANSWER: I am a left-handed shooter and have had no problems shooting a "right-handed" AR-15. To build a true "left-handed" AR-15 would require special upper and lower receivers and associated parts. I know one company offers the upper receiver and BCG, but AFAIK no one offers a left-handed lower and parts.
The only adaption a lefthander needs to do when shooting an AR-15 is to button-up your shirt completed to prevent that one hot case from going down your shirt! The "Hot Brass Dance" is not fun!
Is that the MOE M-LOK hand guard with this kit?
Eric R on Sep 17, 2018
BEST ANSWER: Yes sir it is!
All you would need to complete the rifle is the lower?
Steven on Aug 14, 2018
BEST ANSWER: Yes, a stripped lower, everything else is provided.
Is a magazine included with this kit?
Jason K on Mar 27, 2019
BEST ANSWER: No, However Cabela’s has Magpul magazines to match.
In the product description it states that the upper comes with the rear flip up sight. Iv seen another question and answer saying that’s not true. So does this upper come with the MBUS rear sight?
Nick.C on Sep 21, 2019
BEST ANSWER: Yes, it does come with the rear sight!
What tool are needed to complete this build? Is there anything special I will need?
Wayne on Dec 15, 2018
BEST ANSWER: You will need a stripped lower receiver, a set of pin punches, roll pin punch set, a spanner for the castle nut, a center punch for peening the castle nut in place, and a small mallet (brass preferably). You might want some fine sandpaper and files if you need to do any fitting to get the parts to fit properly.
What would I need to purchase to upgrade the hand guard to a guntec 15 inch hand guard?
061686 0 on Feb 3, 2019
BEST ANSWER: A standard carbine has a 9" hand gaurd ,mid length 11",you probably be better with a full length free float upper kit
What is the difference between the Melonite and the Nitride Barrel Finish?
jimmy s on Oct 15, 2018
BEST ANSWER: What is the trigger tension on this?
Is the barrel in this kit actually 16” ? Or is it less and the flash hider added on makes it a full 16” ? I’m just trying to decide if I should get the mid length kit or the carbine length kit. Thanks
Kevin R on Sep 4, 2019
What is the trigger tension on this?
Matt on Dec 13, 2018


4.9 / 5.0
45 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Fantastic product and Company
These are outstanding kits, not only fit and finish but they function outstanding. I honestly can't say enough good about them.
June 2, 2019
5 months ago
I'm happy.
Every component was shinny, clean, and new. It came with an extra takedown spring and detent pin (just in case you lose it). Took it to the range, discovered the front sight was off. Palmetto was happy to take it back for adjustments. Received it back in three weeks. I'm giving it 5 stars, because the finial finished product is exactly what I wanted.
Consistently hits steel targets over 200 yards with the iron sight (If I could see further, maybe more), Wolf steel case ammo (the cheapest ammo), 0 clicks. Functioned flawless, hot or cold. Looks very nice. Sturdy. The cheapest ammo, accurately, as far as I can see. That's 5 stars.
I have confidence in this company. I've ordered ammo from PSA several times. I'm probably going to be purchasing an additional AR style kit.
June 2, 2019
5 months ago
Great Kit, As Always
This was my 3rd build using a PSA kit. Went together perfectly, functions flawlessly. Another hit! Thanks PSA!
User submitted image
Added May 31, 2019
May 31, 2019
5 months ago
Great quality and price! I will buy from PSA again for my M-16A4 clone build!
Ordered on 12/14/18, received 12/21/18. Completed assembly in 35-40 minutes with no problems whatsoever. The fit between the PSA upper and Anderson lower is smooth and tight, almost like a paired set.
Completed the 500 round break in period shooting 45, 55, 62, 69 and 75 grn rounds in both brass and steel cases with ZERO problems. Groups averaging 1.40 inches @ 100 m.
Greatly appreciated the seperate bagging of the various lower assemblies, made assembly much easier as you don't spend an hour trying to find the correct pins, detents and springs for each step. PSA even included an extra detent and spring for the pivot/takedown pins in case of accidental launches.
This is my second PSA rifle build and both kits have exceeded all expectations. Fit, finish, function and accuracy equals, if not exceeds, those of "name brand" rifles costing at least twice as much. Very satisfied and will recommend PSA products to all.

PS: Only one deviation from the advertised parts: I received the Nitrided Bolt Carrier Group instead of the USGI Parkerized BCG. No problem as I was thinking of ordering a Nitrided BCG anyway. So far, no wear noticed even under magnification. Thanks PSA!
May 26, 2019
Nicely kitted, and easy to put together. Works great!
User submitted image
Added May 25, 2019
May 25, 2019
6 months ago
Good as usual
Feels and runs like a thousand dollar rifle, this was one kit of several and im never dissapointed
May 10, 2019
10 months ago
Oboy! FDE!
Wanted to put together a FDE model and this makes it possible. Not assembled yet but EVERYTHING puchased from Palmetto over the years has always been as advertised. Thanks!
April 20, 2019
8 months ago
Awesome gun shoots great. Definitely worth buying.
April 8, 2019
7 months ago
Good product for the price.
Is great. Easy to build since all Mil Specs.
April 7, 2019
7 months ago
Great value for the price! Almost 500 rds through it and not a single problem! I’m very satisfied!
Love it so far close to 500 rds through it and no issue yet! Great value for the price!
Love it so far close to 500 rds through it and no issue yet! Great value for the price!
April 4, 2019
7 months ago

Customers Who Viewed This Item Also Viewed