PSA 8.5" Pistol-Length 300AAC 1/7 Nitride 7" Lightweight M-Lok MOE EPT SBA3 Pistol

More Views

PSA 8.5" Pistol-Length 300AAC 1/7 Nitride 7" Lightweight M-Lok MOE EPT SBA3 Pistol

TEMPORARILY OUT OF STOCK

Quick Overview

Must be 21 or older to purchase.

If you live in California, please read this notice before ordering.

It is the customer's responsibility to be aware of all applicable laws and regulations regarding the purchase and ownership of uppers with a barrel length of less than 16". Federal NFA regulations are applicable to this item.

WARNING: This product can expose you to the chemical lead, which is known to the State of California to cause cancer and reproductive harm. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

SKU: 5165458537
UPC: 5165458537
MFR#: 5165449807

Gas System: Pistol Length
Barrel Profile: Heavy
Barrel Steel: 4150V Chrome Moly Steel
Barrel Finish: Nitride
Chrome Lining: None
Muzzle Thread: 5/8-24
Chamber: 300AAC Blackout
Twist Rate: 1 in 8"
Barrel Extension: M4
Diameter at Gas Block: .750"
Gas Block Type: Low-profile
Muzzle Device: A2 Style Flash Hider
Receiver Material: Forged 7075 T6 Aluminum
Receiver Type: A3
Handguard Type: PSA 7" Lightweight  M-Lok
Bolt Carrier Group Included: Yes
Bolt Steel: Carpenter 158
Bolt Carrier Profile: Full-auto
Charging Handle Included: Yes
Lower Receiver: Forged 7075 T6 Aluminum
Receiver Finish: Hardcoat Anodized Black
Fire Control Group: Single-Stage, Enhanced Polished Trigger
Grip: Magpul MOE Grip, Black
Buffer Tube: 7075 T6 Aluminum 
Adjustment: Fixed
Pistol Brace: SB Tactical SBA3 Adjustable Pistol Brace, Black
Magazine: 30 Round Aluminum

Add To:

Barrel: 4150V chrome moly steel. Chambered in 300AA Blackout, with a 1:8 twist rate, M4 barrel extension, pistol-length gas system, and nitride treated for accuracy and durability.  This heavy profile barrel is finished off with a PSA 7" Lightweight  M-Lok free-float rail, .750" low-profile gas block, and an A2 flash style flash hider. 

Upper: Forged 7075-T6 A3 AR upper is hard coat anodized.  These uppers are made for us right here in the USA!

Bolt: Full-auto profile bolt carrier group. Shot-peened, mil-spec Carpenter No. 158® steel bolt. Gas Key Hardened to USGI Specifications, Fastened with Grade 8 screws, and Staked Per Mil-Spec. 

Lower: These forged lowers are quality made using 7075-T6 aluminum and are marked "MULTI" for caliber. The finish is hard coat anodized. Pistol 7075-T6 buffer tube is hard coat anodized and is fitted with an SB Tactical SBA3 Adjustable Pistol Brace, Magpul Grip, and Enhanced Polished Trigger (EPT). 

**FFL Required

SKU: 5165458537
SKU 5165458537
Department Firearms - Handguns
Brand Palmetto State Armory
Daily Deal No
Daily Deal Expires No
Unit Price No
Youtube Video No
Free Shipping? No
Free Shipping Qty Label No
Free Shipping Qty No
SKU: 5165458537

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 11 questions Browse 11 questions and 7 answers
What’s the overall length of this?
Jim W on Jun 28, 2019
How is the accuracy on this being a 8.5 length barrel?
Sandoval247 on Jun 30, 2019
BEST ANSWER: I can't speak for this exact model but out of a 10.5" 300 aac PSA 1"8 barrel i had shot better groups (sub moa) than my 16". I currently shoot 1" groups out of a 7.5" barrel at 100 yards in 300 aac. Length isn't so much of a factor in accuracy other than being able to support the gun further out. It will diminish the power of the load compared to a longer barrel but that all depends on your load.
I have no problem dropping deer and hogs at 100 yards out of a 300 aac 7.5" barrel shooting 135gr sierra varminter bullets.
Description says 1/8 twist but title says 1/7. What is the actual barrel twist?
lronda on Jul 1, 2019
BEST ANSWER: I called into PSA, they stated that it was the 1/7 twist and not the 1/8 displayed in lower description.
Can this be purchased with a 10 round mag for state compliance?
Corey on Jun 30, 2019
BEST ANSWER: It uses the same .223/5.56 magazines as the regular so I'd say yes. The .300 round fits in the AR magazines. Having said that there can sometimes be some variances between magazine manufactures. I have read a few, very few, issues concerning the .300 and AR magazines.
Why does the header say “1/7 twist” when the body of the listing states several times it’s 1:8?
Scotty on Jul 30, 2019
Can I own this in North Carolina with a standard gun permit?
DONALD M on Jul 4, 2019
BEST ANSWER: Yes, this is a pistol. If you have a NC handgun permit or your CCW, you can purchase this.
Based on a previous response to the same question on the upper, I'm assuming the flash hider is just threaded onto the barrel and not pinned / welded - correct?
Andrew S on Jul 2, 2019
BEST ANSWER: I have that upper when I bought it seperate and it was just threaded.
Is this a 6 position stock and can I shoot 9mm with proper upper?
Capt.Mike M on Jul 23, 2019
What is the trigger pull weight?
Trent F on Jul 18, 2019
Can I purchase this is Washington State with or without a concealed weapons permit?
Konnor W on Jul 18, 2019

Reviews

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Very nice - great value
It has a loose fit but for $500 it is great. Ran about 45 rounds in first use and no issues - using SS 155 gr got less than 2" group at 100 yds.
August 30, 2019
Purchased
1 month ago

Customers Who Viewed This Item Also Viewed