Chamber: 5.56 NATO
Barrel Length: 11.5"
Barrel Steel: Chrome-Moly Vanadium
Barrel Finish: Nitirde
Barrel Profile: A2 Style
Muzzle Device: A2 Flash Hider
Twist Rate: 1 in 7"
Extension: M4
Gas System: Carbine-Length
Gas Block Type: Low Profile .750" Diameter
Upper Receiver: Forged 7075 T6 Aluminum
Receiver Style: M4 Flat top with feed ramps
Receiver Finish: PSA Custom Finish, Teflon Coated
Forward Assist: Yes
Dust Cover: Yes
Handguard Style: PSA 10.5" LW-M-Lok Rail
Bolt Steel: Carpenter 158
Bolt Carrier Steel: 8620 DLC Coated in FDE
Staked Gas Key: Yes
Lower Receiver: Forged 7075 T6 Aluminum
Receiver Finish: PSA Custom Finish, Teflon Coated
Fire Control Group: PSA Custom 3.5 lb Flat Bow FCG
Buffer Tube: 7075 T6 Aluminum Mil-Spec Tube
Adjustment: 6-position collapsible
Brace: SB Tactical SBA3 Adjustable Pistol Brace
Safety: PSA Custom Short/Long Throw Ambi-Safety SET TO A 45° THROW NOT A 90° THROW
Magazine: (1) 30-Round Magazine (where available by law)
Sights: Magpul Mbus sights
Optic: Holosun Micro Red Dot

Features

CUSTOM PAINTED ITEMS FROM PSA CUSTOM MAY HAVE BLEMISHES AND/OR DIFFERENCES FROM PICTURE

The Palmetto State Armory Custom Series gives you a tried-and-true platform with a custom finish that is sure to draw attention.

Barrel: 11.5" Chrome-Moly Vanadium barrel Chambered in 5.56 with a 1/7 twist. The barrel is Nitride treated for durability and finished off with a PSA 10.5" LW-M-Lok Rail and a A2 Flash Hider.

Upper: Billet 6061-T6 AR upper is Teflon-Coated for durability. These upper receivers are made for us right here in the USA.

Bolt Carrier Group: The Palmetto State Armory DLC coated Bolt Carrier Group was designed with the serious AR enthusiast in mind. The bolt is made of Mil-spec Carpenter 158 steel, shot peened and high pressure tested. Gas key is machined out of bar stock, DLC coated, then secured with grade 8 fasteners and staked per mil-spec. Bolt carrier is coated with DLC (Diamond Like Coated). Made in America with an unconditional lifetime warranty.
• Milspec Carpenter No. 158 steel bolt
• Shot Peened Bolt
• High pressure tested
• Gas Key Hardened to USGI Specifications
• Gas Key Grade 8 Hardened Fasteners
• Gas Key Staked Per Mil-Spec
• Tool Steel Extractor
• Extractor Spring
• Extractor O-ring Insert

Lower: These forged lowers are quality made using 7075-T6 aluminum and are marked "MULTI" for caliber. 7075-T6 buffer tube is hardcoat anodized and is fitted with an SB Tactical SBA3 Adjustable Pistol Brace, Magpul Grip, PSA Custom Ambi Safety (Set to 45° throw not 90° throw) and a PSA Custom 3.5lb Flatbow FCG.

The Palmetto State Armory Custom Series line of accessories, components, and firearms are designed to give you the tactical or competitive advantage when you need it most!

Report incorrect product description

Reviews

Q & A

Retail Stock

Compliance

Shipping Restrictions

It is the customer’s responsibility for understanding state laws regarding all purchases made. For a comprehensive list of all Shipping Restrictions, please refer to our Shipping Restrictions By State Page found Here.

All NFA Rules Apply

These items are controlled by the U.S. Government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.

Magazines will be removed from firearms when shipping to states with magazine capacity restrictions.

WARNING: Handling firearms or firearms parts can expose you to lead and other petroleum products known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands thoroughly after handling. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).