Barrel Length: 8.5"
Barrel Profile: Heavy
Barrel Steel: 4150
Barrel Finish: Nitride
Chrome Lining: No
Muzzle Thread: 5/8-24
Chamber: 7.62x39mm
Twist Rate: 1 in 10"
Barrel Extension: KS47 Gen2 Single-Large Feed Ramp
Gas System Length: Carbine
Diameter at Gas Block: .750"
Gas Block Type: Low Profile
Muzzle Device: A2-Style
Receiver Material: Forged 7075 T6
Receiver Type: KS-47
Handguard Type: PSA 7" Lightweight M-Lok Free Float Rail
Bolt Carrier: Gen2 TC-E KS-47 BCG with Toolcraft Enhanced Extractor
Bolt Steel: Carpenter 158
Bolt Carrier Profile: Semi-Auto

Features

The Palmetto State Armory KS-47 G2 is based on the AR-15 and combines the modular construction, accuracy, and precision of the AR platform with the stopping power and the magazine options of the AK. The KS-47 G2 lets the AK shooter capitalize on their inventory of AK magazines and AK ammo with an AR-style platform. Unlike the AK, where the barrel is permanently pressed into the receiver, the KS-47 G2 features an AR-style modular configuration which consists of a barreled upper receiver, and a lower receiver that houses the fire control group and magazine. The modular configuration allows customers to have several different barrel configurations with one lower receiver, just by releasing two pins.

Upper: The KS-47 G2 upper receiver is precision machined out of forged 7075 T6 aluminum, and then hard coat anodized for durability. While retaining the look of a standard M4 upper, the KS-47 G2 upper is designed to work with the new Gen2 KS-47 lower. The upper features integrated over-insertion tabs to prevent the bolt from dragging on the magazine. This CMV 4150 barrel is chambered in 7.62x39 with a 1 in 10 twist and has a single, large feed ramp to accommodate the larger case diameter of the 7.62x39 round. The barrel is nitride treated for accuracy and durability and is finished off with a 5/8-24 thread A2-style compensator. The forward assist, dust cover, charging handle, and safety are all standard AR-15. This KS-47 G2 upper is finished off with a PSA 7" Lightweight M-Lok Free Float Rail. The KS-47 G2 upper will not work with a standard AR-15 lower.

BCG: The new TC-E KS-47 Bolt carrier group features a new and improved Toolcraft enhanced extractor for durability. Featuring an extended firing pin and designed to work with AK-47 magazines, the carrier is made of nitride-treated 8620 steel, and the gas key is attached with grade 8 bolts and properly staked. The bolt has been redesigned to function properly with most AK-47 magazines. The bolt is mag phosphate coated Carpenter 158 steel.

Magazine: The KS-47 G2 comes with one Magpul 30 round AK-47 magazine (where allowed by law). The new Gen2 KS-47 has been tested and is guaranteed to work with the following AK-47 magazines:

Magpul AK-47 Pmag
Romanian Stick Magazine
Romanian Drum Magazine
Chinese Drum Magazine
Chinese Stick Magazine
Korean Drum Magazine
Korean Stick Magazine
Yugoslavian Stick Magazine
Bulgarian Stick Magazine
Circle10 Stick Magazine
Hungarian Stick Magazine
Russian Stick Magazine

** Due to the unique geometry required for the KS-47 G2 BCG to function, ALL other magazines will not be guaranteed to work. If you are using a magazine not listed above, no warranty claims will be accepted for magazine functioning issues.

KS-47 Gen1 & Gen2 Compatibility:

The KS-47 G2 uppers and lowers will function with the KS-47 G1 uppers and lowers. However, if any KS-47 G1 parts are used, all of the improvements of the KS-47 G2 may not be optimized. We recommend using Magpul AK-47 Magazines on any KS-47 that is a combination of Gen 1 and Gen 2 parts.

Report incorrect product description

Reviews

Q & A

Retail Stock

Compliance

Shipping Restrictions

It is the customer’s responsibility for understanding state laws regarding all purchases made. For a comprehensive list of all Shipping Restrictions, please refer to our Shipping Restrictions By State Page found Here.

All NFA Rules Apply

These items are controlled by the U.S. Government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.

It is the customer's responsibility to be aware of all applicable laws and regulations regarding the purchase and ownership of uppers with a barrel length of less than 16". Federal NFA regulations are applicable to this item.

Local Law Compliance

Certain firearm parts and accessories, including AR-style upper receivers, are subject to complex and frequently changing federal, state, and local laws and regulations. While an upper receiver may be lawfully sold and shipped as a component, the legality of possessing, assembling, configuring, or using an upper receiver in certain states (e.g., California, Washington State) and localities depends on how it is assembled, combined with other components, and ultimately used. You are solely responsible for ensuring that any assembly, configuration, possession, or use complies with all federal, state, and local laws, including any so-called “assault weapon” bans and short-barreled rifle restrictions. We do not provide legal advice and are not responsible for unlawful configurations or uses.

WARNING: Handling firearms or firearms parts can expose you to lead and other petroleum products known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands thoroughly after handling. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

Warranty

Palmetto State Armory firearms are covered by an industry-leading Full Lifetime Warranty. This extends beyond the original purchaser. We want the person who bought a great quality firearm at an excellent price to have comfort in knowing that, if an issue arises due to a defect in materials or workmanship, we will make it right, consistent with this warranty.

We strive for excellence all the way through production and hope customers never have to use this warranty. We also pride ourselves in a 99% non-repair/non-return ratio, but this warranty is here for peace of mind so that the customer can be confident in their purchase.

For the Life of Our Product

Firearms and parts manufactured by Palmetto State Armory are backed by our Full Lifetime Warranty. Our PSA manufactured firearms and parts are warranted to be free from defects in materials and craftsmanship for the serviceable lifetime of the firearm or part. The liability of Palmetto State Armory under this warranty shall be limited solely to the obligation to repair the defect, replace the firearm or part, or provide a refund, and to pay transportation and insurance charges for any return of the firearm to the owner for a rightful warranty claim. This warranty is transferable for the serviceable lifetime of the firearm or part.

What We Don't Cover

This warranty does not cover ordinary wear and tear or any damage resulting from careless or criminal handling, abuse, neglect, corrosion, unauthorized or improper modifications, including modifications using non-PSA or otherwise incompatible parts, unauthorized or improper repairs or adjustments, use of improper, substandard, reloaded, or defective ammunition, or other unauthorized or unreasonable use of the firearm or firearm part. Palmetto State Armory disclaims all responsibility and liability for any damage caused as a result of third-party accessory use.

This warranty is offered solely to individual consumer (civilian) customers. It does not apply to government or non-civilian customers. This warranty is valid only for residents of the United States (excluding territories) and applies only to firearms and parts purchased, located, and used within the United States. We do not accept returns for, and will not repair or replace, any firearms or parts purchased, located, or used outside the United States.

Palmetto State Armory, in its sole discretion, will determine if a particular issue or condition is covered by this warranty.

Initiating a Warranty Claim

To initiate a warranty claim, please use the Contact Form and select "Problem with a PSA Product" as your Contact Reason. Warranty claims must include a completed RMA form in the box with the returned firearm or part. All complete firearms need to be returned in full for repair. Replacement parts will not be issued or sent to the customer. The firearm or part concerned must be shipped using the prepaid label that our representative emails to you. Palmetto State Armory will pay shipping and insurance charges for the return of a firearm or part to its owner or FFL, if the related claim is a proper claim for warranty work. If Palmetto State Armory is unable to fix the original serial number, a new one will be sent out but must go to an FFL for transfer back to the customer. Another background check will be completed at the time of transfer. Palmetto State Armory is not responsible for transfer fees at the FFL.

The remedies described above are your sole and exclusive remedies and Palmetto State Armory's entire liability for any breach of this Full Lifetime Warranty. Palmetto State Armory shall not under any circumstances be liable for any consequential, incidental, special or punitive damages or losses, whether direct or indirect.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

This Full Lifetime Warranty gives you specific legal rights and you may also have other rights, which vary from state to state.

PSA Gen2 KS-47 8.5" Pistol-Length 7.62x39 1/10 Nitride 7" Lightweight M-Lok Upper With BCG & CH - TC-E Extractor

Closeout