PSA Gen2 KS47 16" Carbine-Length 7.62x39mm 15" Lightweight M-Lok Nitride Upper - With BCG & CH

More Views

PSA Gen2 KS47 16" Carbine-Length 7.62x39mm 15" Lightweight M-Lok Nitride Upper - With BCG & CH

In stock

Special Price $ 399.99

Regular Price: $ 589.99

Quick Overview

WARNING: This product can expose you to the chemical lead, which is known to the State of California to cause cancer and reproductive harm. For more information go to (CA Health and Safety Code Section 25249.6).

SKU: 5165450826
UPC: 5165450826
MFR#: 5165450826

Barrel Length: 16"
Barrel Profile: Mid-weight
Barrel Steel: 4150
Barrel Finish: Nitride
Chrome Lining: No
Muzzle Thread: 5/8-24
Chamber: 7.62x39mm
Twist Rate: 1 in 10"
Barrel Extension: KS47 Gen2 Single-Large Feed Ramp
Gas System Length: Carbine
Diameter at Gas Block: .750"
Gas Block Type: Low Profile
Muzzle Device: A2-Style
Receiver Material: Forged 7075 T6
Receiver Type: KS-47
Handguard Type: PSA 15" Lightweight M-Lok Free Float Rail
Bolt Steel: 9310
Bolt Carrier Profile: Semi-Auto

Add To:

Upper: The KS-47 G2 upper receiver is precision machined out of forged 7075 T6 aluminum, and then hard coat anodized for durability. While retaining the look of a standard M4 upper, the KS-47 G2 upper is designed to work with the new Gen2 KS-47 lower.  The upper features integrated over-insertion tabs to prevent the bolt from dragging on the magazine. This CMV 4150 barrel is chambered in 7.62x39 with a 1 in 10 twist and has a single, large feed ramp to accommodate the larger case diameter of the 7.62x39 round. The barrel is nitride treated for accuracy and durability and is finished off with a 5/8-24 thread A2-style compensator. The forward assist, dust cover, charging handle, and safety are all standard AR-15.  This KS-47 G2 upper is finished off with a PSA 15" Lightweight M-Lok Free Float Rail. The KS-47 G2 upper will not work with a standard AR-15 lower.

BCG: The KS-47 Bolt carrier group is designed to work with AK-47 magazines, and features an extended firing pin. The carrier is made of nitride treated 8620 steel, and the gas key is attached with grade 8 bolts and properly staked. The bolt has been redesigned to function properly with most AK-47 magazines. The bolt is nitride treated 9130 steel. 

SKU: 5165450826
SKU 5165450826
Department Uppers
Brand Palmetto State Armory
Daily Deal No
Daily Deal Expires No
Unit Price N/A
Youtube Video No
Free Shipping? No
Free Shipping Qty Label No
Free Shipping Qty No
SKU: 5165450826

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 6 questions Browse 6 questions and 5 answers
How does it run with the steelcased,laquer coated chi-com ammo?
Wambam on Apr 27, 2019
BEST ANSWER: It runs great with various types of steel. I've shot both wolf and tula.
I have a S. O. G. In 223. Will this fit? Thanks
Jim H on Apr 27, 2019
Have there been issues with over gassing in the 16" barrels with a carbine gas system?
Logan on May 27, 2019
BEST ANSWER: I think it kicks less than an AK. No FTF, FTE. Kicks the cases out smartly.
What is the bore dia., .308, .310, .311?
Steve S on Apr 30, 2019
BEST ANSWER: PSA told me .3125
Will this gen 2 upper fit and function on a KS47 gen 1 lower?
Douglas H on Jul 16, 2019
PSA Gen2 KS47 16
PSA Gen2 KS47 16" Carbine-Length 7.62x39mm 15" Lightweight M-Lok Nitride Upper - With BCG & CH
PSA 16
PSA 16" 7.62 KS47 Melonite 13" Keymod Freedom Upper - w/BCG & CH - 7781375
PSA KS47 Stripped Upper Receiver
PSA KS47 Stripped Upper Receiver
PSA Gen2 KS-47 16
PSA Gen2 KS-47 16" Carbine-Length 7.62x39mm 13.5" Lightweight M-Lok Nitride Upper With BCG & CH
Is this PSA 15" lightweight M-lok Free Float Rail also standard ar-15 like the forward assist, dust cover, charging handle and safety????
JESSE J on Jul 16, 2019


4.6 / 5.0
11 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Pig slaying machine
I own the Gen 1 and Gen 2 KS-47, I absolutely love both, but the Gen 2 is so much better. The only two things that I could see improvement with the Gen 2 is a tighter spring or smaller surface area on the magazine release and a large charging handle which I installed a Bravo gunfighter. I use my KS-47 mainly as a truck gun around the Ranch for shooting pigs and other varmints. When moving through brush, getting in and out of the truck, or climbing over fences, the “Tactical” magazine release will dump your mag. I remedied this problem with an O-Ring and a zip tie.
Gen 2 with primary arms 3X prism, hitting steel at 500 YDS with this Beast
Gen 2 with primary arms 3X prism, hitting steel at 500 YDS with this Beast
July 2, 2019
4 months ago
This rifle plus devil dog hard side charger is the perfect combination
Fun "in-between" rifle that allows me to shoot the heavy hitting 7.62x39 in a familiar AR platform that easily mounts optics (primary arms 3x prism scope) on a full length picatanny rail. Love the ability to rock and lock AK mags into this rifle. I managed to modify the devil dog hard side charger to rifle to bring it just a little closer to the AK platform
June 27, 2019
4 months ago
Upper cycles everything and is more accurate than expected.
Recently purchased the PSA Gen2 KS47 16” upper assy and attached it to a PSA KS47 lower. The receivers matched up very nicely both in color and fit. Since my purchase I have been able to run 123g and 124g Red Army, Wolf, and Tulammo steel case rounds through the completed rifle. I have also ran PPU brass case ammo through it as well. The upper has provided excellent accuracy given the inaccuracy of the budget steelcase ammo. With better ammo, this upper and barrel is likely going to be a very adequate rifle for hunting as well as plinking. There is no last round hold open lever on the lower so charging every new mag is necessary. I have only used Pmags so far, but rounds cycle very smooth and without issue due to the wide cut feed ramp in the barrel and receiver. The MLok handguard offers lot of mounting options on all needed sides. Overall I’ve found much to like with this upper and complete rifle overall. I would definitely recommend to other buyers.
KS47 upper w/ KS47 lower.
KS47 upper w/ KS47 lower
KS47 Top view of handgaurd
KS47 Top view of handguard and receiver
KS47 Side view
June 27, 2019
4 months ago
Very Pleased
I had this out to the range for the second time yesterday, and it continues to impress. It has functioned flawlessly with the Korean mag's I've used. So far I've fired 80 rounds of tula and 40 rounds of old west-german surplus. The groups are also much better then I'd expected, and I like the slim hand guard. Only con I have is it recoils more then my AK, but that's to be expected since it also weighs a couple pounds less.
June 26, 2019
4 months ago
Winner!! PSA Gen2 KS47 16" Carbine-Length 7.62x39mm 15" Lightweight M-Lok Nitride Upper
Had bought a blem lower and built it almost two years earlier and ordered the wrong upper (PA47). Bought this, put it on the pins. WOW! Easy to sight in with iron sights, Stunning with a 3x ACOG. 250 hard rounds first time (MagPul mags) with no hiccups. Didn't like Croatian mag (no surprise read the rec's). Really impressed, like it better than my PS-47 (gen 2). It's a welcome addition. Liked is so much I made an 8.5 KS-47 pistol. Think I may make it into a 10.5 but it's good as it is. Loud little bugger though LOL.
June 26, 2019
4 months ago
Very good item
It has worked very well. I did have a bad mark on the upper under the forward asst handle. Past that I am happy with what I got.
June 20, 2019
4 months ago
6 to midnight
Probably the coolest gun purchase I’ve ever made. Very pleased overall. I watched the progression of this rifle during the 1st Gen and researched the hell out of it continuing through the 2nd Gen. If your waiting for a 3rd Gen, holding out for a bolt hold, don’t waste your time. If you really need that, there’s hundreds of AR’s to pick from out there. Listen to the AK inside yourself.
User submitted image
User submitted image
June 19, 2019
4 months ago
Worth the wait.
Accurate, fun to shoot. 4 stars because of the known handguard issue. A little Locktite and it's been running great.
June 16, 2019
4 months ago
Best 7.62x39 upper out their by far thank's.
Over 500 rounds and not one problem every accurate can't wait to buy another one thanks a lot psa
June 14, 2019
4 months ago
Nice hand guard, but it won’t stay put.
I received this upper two weeks ago, and I was eager to get it to the range to see what it could do. The accuracy was better than I hoped for. However, after 100 rounds the upper hand guard worked its way forward on the barrel nut. I figured that it was no big deal... I would just retighten the two hand guards screws, and all would be well. I tightened the two screws as much as the hand guard would allow, and headed back to the range. After another 100 rounds, the hand guard worked its way forward again on the barrel nut. I did confirm that the hand guard screws were locktited. So now I don’t know what to do. I think that I will slip some rubber inter tube between the hand guard and the barrel nut, retighten again, and see if that works. Maybe I got a bad hand guard or barrel nut, but I saw a YouTube reviewer who had the same problem on their KS47 upper as well. So I think it is something with the hand guard design that needs to be fixed.
June 1, 2019

Customers Who Viewed This Item Also Viewed