Out of stock
PSA Gen4 8" 9mm 1/10 GX M-Lok MOE EPT Shockwave Pistol
Out of stock

PSA Gen4 8" 9mm 1/10 GX M-Lok MOE EPT Shockwave Pistol

Details
SKU 5165451064
Brand Palmetto State Armory
descriptionProduct Manual
It is the customer's responsibility to be aware of all applicable laws and regulations regarding the purchase and ownership of uppers with a barrel length of less than 16". Federal NFA regulations are applicable to this item.
Handling firearms or firearms parts can expose you to lead and other petroleum products known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands thoroughly after handling. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

Product Details

Details

PSA Gen4 8" 9mm 1/10 GX M-Lok MOE EPT Shockwave Pistol

Barrel Length: 8"
Gas System: Blowback
Barrel Profile: A2
Barrel Steel: 4150V Chrome Moly Steel
Barrel Finish: Nitride
Chrome Lining: None
Muzzle Thread: 1/2-36
Chamber: 9mm (9x19)
Twist Rate: 1 in 10"
Barrel Extension: Blowback
Diameter at Gas Block: N/A
Gas Block Type: N/A
Muzzle Device: Birdcage Flash Hider
Receiver Material: Forged 7075 T6
Receiver Type: Slick Side
Handguard Type: PSA 7" Lightweight M-Lok
Bolt Carrier Group Included: Yes
Bolt Steel: 8620
Bolt Carrier Profile: 9mm Gen4
Charging Handle Included: Yes
Lower Receiver: Forged 7075 T6 Aluminum
Receiver Finish: Hardcoat Anodized
Fire Control Group: Single-Stage, Enhanced Polished Trigger (EPT)
Grip: Magpul, Black
Buffer Tube: 7075 T6 Aluminum 
Adjustment: Fixed
Pistol Brace: KAK Shockwave Blade, Black
Magazine: ETS Clear Magazine, 31 Round

Features

Barrel: 8" chrome moly steel barrel. Chambered in 9mm, (9x19), with a 1/10 twist. The barrel is nitride treated for durability and finished off with a Palmetto State Armory 7" Lightweight M-Lok free-float rail and a birdcage style A2 flash hider. 

Upper: Billet 6061-T6 Slick side AR upper is hard coat anodized black for durability.  These upper receivers are made for us right here in the USA.

Bolt Carrier Group: Gen 4 Hybrid 9mm BCG.  Nitride treated 8620 steel bolt, with an enhanced firing pin and external 5.56 style extractor. The bolt carrier group is compatible with most aftermarket fire control groups. 

Lower: Forged 7075 T6 aluminum and then hard coat anodized, these lowers are purpose-built to accept 9mm Glock®-style magazines.   Designed to work with PSA's new 9mm Hybrid uppers.  The lower is assembled with a Palmetto State Armory MOE EPT Shockwave lower build kit with a Magpul Grip, KAK Industries shockwave buffer tube, and KAK Shockwave Blade.  Does not include last round bolt hold open feature.

Reviews

Q & A

Retail Stock

Warranty

AMERICAN MADE. FOR LIFE.

Flag

Full Lifetime Warranty.

Palmetto State Armory firearms are covered by an industry leading Full Lifetime Warranty. This extends beyond the original purchaser. We want the person who bought a great quality firearm at an excellent price to have comfort in knowing that no matter what, the firearm can be fixed at no additional cost.

This includes shipping both ways.

We strive for excellence all the way through production and hope customers never have to use this warranty but we also pride ourselves in 99% non-repair/return ratio. It is there for peace of mind so that the consumer can be confident in their purchase. Should the consumer ever need to contact us regarding a repair under the warranty, simply use our contact form or give us a call at (803) 724-6950.

Palmetto State Armory firearms and parts are backed by our Full Lifetime Warranty. Our PSA firearms and parts are warranted to be free from defects in materials and craftsmanship for the serviceable lifetime of the firearm or part.

For the Life of our product

The liability of Palmetto State Armory under this warranty shall be limited solely to the obligation to repair or replace the firearm/part or defect at its discretion, and to pay transportation and insurance charges for return of the firearm to the owner for a rightful warranty claim. This warranty is transferable for the serviceable lifetime of the firearm or part. Modification of firearm will void this warranty. This warranty does not cover normal wear or any damage resulting from careless handling, neglect, repairs and adjustments, corrosion, improper, substandard or defective ammunition.

What we don't cover

Under no circumstances shall Palmetto State Armory be responsible for incidental or consequential damages with respect to economic loss or injury to property, whether as a result of express or implied warranty, negligence or otherwise. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. Palmetto State Armory will not be responsible for the results of careless handling, unauthorized adjustments, defective, low-quality, reloaded, or improper ammunition, corrosion, neglect, ordinary wear and tear, or unreasonable use.

Initiating a claim

To initiate a Warranty claim, call Palmetto State Armory Customer Service:

Hours: Monday through Friday, 9am - 6pm EST Email: Contact Form
  1. Customer service will issue an RMA number to allow for the return of the firearm.
  2. Warranty claims must have this RMA filled out, and included in the box with the firearm or part.
  3. The firearm or part concerned must be shipped using the prepaid label our representative emails to you.

Palmetto State Armory will pay shipping and insurance charges for the return of a firearm or part to its owner or FFL, if the related claim is a proper claim for warranty work. If Palmetto State Armory is unable to fix the original serial number, a new one will be sent out, but must go to an FFL for transfer back to the customer. Another background check will be completed at the time of transfer. Palmetto State Armory is not responsible for transfer fees at the FFL.

Loading...