PSA PA-47 10.5" Carbine Length 7.62x39 1/10 Pistol Upper - with BCG and Charging Handle - 507841

More Views

PSA PA-47 10.5" Carbine Length 7.62x39 1/10 Pistol Upper - with BCG and Charging Handle - 507841

TEMPORARILY OUT OF STOCK

Quick Overview

It is the customer's responsibility to be aware of all applicable laws and regulations regarding the purchase and ownership of uppers with a barrel length of less than 16". Federal NFA regulations are applicable to this item.

SKU: 507841
UPC: 507841
MFR#: 507841

10.5" Barrel Length
Carbine Length Gas System
1 in 10" Twist Rate
F-marked front sight
Forged Upper Receiver
4150V Steel with Nitride Finish
7.62 x 39mm Chamber
PSA Classic Handguards
A2 Flash Hider
T-Marks

Add To:

Barrel: 10.5", 4150V Steel, Nitride treatment . Chambered in 7.62x39mm, with a 1:10 twist rate, and a carbine length gas system. Barrel is finished off with a .750" diameter F-marked front sight base with sling swivel, standard handguards, and an A2 flash hider.

Upper: Forged 7075-T6 A3 AR upper is hard coat anodized black for durability. Featuring M4 feedramp cuts, T-marks, these upper upper receivers are made for us right here in the USA.

Bolt Carrier Group: Carpenter 158 Phosphate coated 7.62x39 bolt, Semi auto profile 8620 steel carrier, chrome-lined and phosphate coated. Phosphate coated chrome-lined gas key staked per mil-spec. AR-47 extended length firing pin.

SKU: 507841
SKU 507841
Brand Palmetto State Armory
Daily Deal N/A
Daily Deal Expires N/A
Youtube Video N/A
Free Shipping? N/A
SKU: 507841

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 9 answers
Woukd this upper fit and operate kn a psa classic at 15 pistol lower?
Don C on May 15, 2018
BEST ANSWER: Yes, this will work with an AR15 pistol lower.
Does this mount on ar 15 or ar 10?
Josh R on Apr 24, 2018
BEST ANSWER: Mounts to any milspec AR15 lower, but you will need a bolt designed for 7.62, and special mags as well.
Will this upper work with the KS47 lower?
William G on May 21, 2018
BEST ANSWER: Im pretty sure it doesn't. The part of the upper that receives the upper part of the AK magazines needs to be wider than what is seen with the ar15 uppers. This widening is clearly visible with the KS47 uppers. Its hard to tell but the pics appear to not show this widening.

Reviews

4.6 / 5.0
9 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
8
0
0
0
1
Just buy one already!
Works great. I initially thought I had a problem because it would feed, fire and eject the first round but would not fire the chambered second round. Traced the problem to a faulty disconnector in my lower receiver which had caused bolt override. I changed out the disconnector and spring so it now runs flawlessly no matter what ammo I feed it...brass case, steel case, FMJ, HP.
July 13, 2018
Purchased
2 months ago
Awesome upper
I bought this upper for a SBR build, it ran perfect. The caliber and ammo along with the 10.5" barrel gave a strong muzzle blast. With a
suppressor it is just over 16 inches. A real complement to the 556 upper.
July 12, 2018
Purchased
2 months ago
I hope if you buy one it works better for you than mine does for me.
I am sad to write this, but PSA emailed me asking for the review, so.... First off, I have several different pistol and carbine uppers from PSA, they’re all awesome. Thats why this one is breaking my heart. I even sent it back to PSA to get it fixed cuz it couldn’t get through a single magazine without the EXACT same kind of jam happening. It would fail to feed properly, and the bolt wouldn’t fully lock/seat into battery. I typed a whole thing for the techs when I sent it back. It came back unannounced, with the paper I provided crumpled up in the box. No feedback, no assessment, no guidance. So, I took it back out to the range to see if it’d work. It not only kept jamming in the same way as before, but now it jams in a whole new way where it fails to eject the case out of the receiver, and the spent case keeps the bolt from closing on the next round. Not awesome. This makes me wish I would’ve just bought something more expensive to begin with. I have a midlength PA47 16in upper that runs like a top. This one, not so much at all. When it does fire, it will smash steel at 300m on either BUIS or the mounted M21. Too bad its unreliable.
When it fires, it will smash steel plates at 300m, with the BUIS or the M21.
When it fires, it will smash steel plates at 300m, with the BUIS or the M21.
June 8, 2018
Purchased
3 months ago
Response from Palmetto State Armory
We do apologize for that. Since all of our parts and firearms are covered by our Unlimited Lifetime Warranty, if you have any issues arise from the craftsmanship of the product, we can either have select parts sent to you for you to replace, or we can have the item brought in, at no cost to you, so we can repair or replace the defective product. Please contact Customer Service so we may resolve this issue.
June 11, 2018
Casey S
Excellent price and value
I have the PSA carbine 7.62 X 39 upper and it has always set off the steel cased ammo but the pistol upper failed to fire about 6 or 7 times out of 40 rounds. I will try a different 'enhanced' firing pin. That's why I did not rate it a 'five' in quality. Also I put the Magpul handguards on the pistol upper much better than the factory handguards and swapped out the flash hider for a KAK flash can.
Overall great deal for a great price. Thanks Palmetto State Armory!
February 7, 2016
my review
I put this upper on an ar pistol with wolf heavy trigger spring carbine buffer and spring. Took it to the range fired 60rds of wolf ammo with 2 light primer strikes tried tula next but had a failure to eject every other round. So took it home measured the gas port thinking it was under gased and it was .078 so I opened the port to .091 then I ordered an enhanced firing pin from blackriflearms.com took it back to the range fired 120rds of wolf and 140rds of tula with no failures.
January 17, 2016
my review
I put this upper on an ar pistol with wolf heavy trigger spring carbine buffer and spring. Took it to the range fired 60rds of wolf ammo with 2 light primer strikes tried tula next but had a failure to eject every other round. So took it home measured the gas port thinking it was under gased and it was .078 so I opened the port to .091 then I ordered an enhanced firing pin from blackriflearms.com took it back to the range fired 120rds of wolf and 140rds of tula with no failures.
January 17, 2016
Truly excellent the poor man's 300 BLK
As other reviews state this thing is awesome and as reliable as the ammo and magazines you feed it! Drop another 50$ for an MOE grip and a flash can and it functions as well as my Noveske 300 AAC for 1/3 the price and uses much cheaper ammo. PSA is always my first stop for awesome AR stuff thanks all :)
December 23, 2015
Outstanding
Took a chance and got one of these a couple weeks ago. Internet says 7.62x39 uppers don't run reliably but that doesn't apply go these uppers. Put two hundred rounds thru it today and ran perfect. Fit and finish were outstanding and I have ZERO gripes. PSA was out of stock on the magazines so I ordered 5 C-Product Defennse mags from another source - perfect combo. Even with traditional am4 feed ramps this upper WORKS!!
November 29, 2015
Best deal anywhere!
299.99 with free shipping on Father's Day. I couldn't pass it up!
I've put about 100rds through it so far. The news c-products defense I got from Aimsurplus ran perfect! 30rd 28rd 20rd and 10rd All 4 of them ran perfect and was completely full. Only hickup I had was one failure to feed from the only ASC 30rd mag I have (follower got stuck). It was a mag issue.
So far I'm a multi-time happy PSA customer.
June 29, 2015

Customers Who Viewed This Item Also Viewed