PSA PX-10 18" Mid-Length .308 WIN Stainless Steel 13.5" M-Lok Lightweight MOE CTR EPT Rifle - 5165448549

More Views

PSA PX-10 18" Mid-Length .308 WIN Stainless Steel 13.5" M-Lok Lightweight MOE CTR EPT Rifle - 5165448549

TEMPORARILY OUT OF STOCK

Quick Overview

WARNING: This product can expose you to the chemical lead, which is known to the State of California to cause cancer and reproductive harm. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

SKU: 5165448549
UPC: 5165448549
MFR#: 5165448549

Barrel Length: 18”
Barrel Material: 416R Stainless Steel
Barrel Profile: A2
Chamber: .308 WIN
Twist Rate: 1 in 10”
Extension: PSA X-10
Gas System: Mid-Length
Gas Block Type: Low profile .750”
Upper Receiver: Forged 7075 T6 Aluminum
Receiver Style: PSA X-10
Receiver Finish: Hardcoat Anodized
Forward Assist: Yes
Dust Cover: Yes, PSA X-10
Handguard Type: Free Float
Handguard Style: PSA  X-10 Lightweight M-Lok Free Float
Handguard Length: 13.5”
Bolt Steel: 9310, Nitride Treated
Bolt Carrier Steel: 8620, Nitride Treated
Staked Gas Key: Yes
Lower Receiver: Forged 7075 T6 Aluminum
Receiver Finish: Hardcoat Anodized
Fire Control Group: Single-Stage, Enhanced Polished Trigger (EPT)
Buffer Tube: 7075 T6 Aluminum 
Adjustment: 6-position telescoping stock
Stock: Magpul Moe CTR Stock, Black
Grip: Magpul Grip, Black
Magazine: 20 Round PMAG
Length: 36 in

Add To:

Palmetto State Armory is proud to introduce a lighter weight version of the PA-10!  The PX-10 is designed to bridge the gap between the larger build of an AR-10 and the slimline feel of an AR-15.  The new PX-10 18" Mid-Length .308 Winchester Stainless M-Lok Lightweight MOE CTR EPT Rifle is the perfect solution to give you the power of the .308 cartridge without the heavy & bulky feel of a traditional AR-10 platform.

Barrel: Machined from 416R stainless steel, chambered in .308 WIN with a 1:10 twist rate and a midlength gas system. Upper is paired with a PSA 13.5" Lightweight M-Lok Free Float rail that is unique to this platform, a .750 gas block, and an A2-style muzzle device.

Upper:  Precision machined from forged 7075-T6 aluminum, then black anodize hardcoated to MIL-8625 Type 3 class 2.   

Bolt Carrier Group:  9310 steel bolt assembly, nitride treated for durability.  8620 carrier, nitride treated, with a nitride treated gas key properly staked with grade 8 fasteners.  The X-10 bolt carrier group profile is smaller in diameter than the PA-10 BCG helping reduce weight of the rifle to increase mobility.  Charging handle included.

Lower: Precision machined from forged 7075-T6 aluminum, these lowers are then Black anodize hardcoated to MIL-8625 Type 3 class 2.   With an AR-15 style EPT fire control group, a Magpul CTR Stock, and a Magpul AR-15 Grip.  The ability to use AR-15 parts in this .308 AR rifle increases your ability to customize the lower to fit your needs with the more widely available AR-15 products.

SKU: 5165448549
SKU 5165448549
Department Firearms - Long Guns
Brand Palmetto State Armory
Daily Deal No
Daily Deal Expires No
Unit Price N/A
Youtube Video No
Free Shipping? No
Free Shipping Qty Label N/A
Free Shipping Qty N/A
SKU: 5165448549

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 11 questions Browse 11 questions and 19 answers
What barrels are compatible with this rifle?
RonaldW on Jul 3, 2018
PSA PX-10 18
PSA PX-10 18" Mid-Length .308 WIN Stainless Steel 13.5" M-Lok Lightweight MOE CTR EPT Rifle - 5165448549
PSA PX-10 18
PSA PX-10 18" Mid-Length .308 WIN Stainless Steel 15" Keymod Lightweight MOE Rifle - 516446415
PSA PX-10 18
PSA PX-10 18" Mid-Length .308 WIN 1:10 Stainless Steel 13.5" M-Lok Lightweight Upper w/ BCG & CH
PSA PX-10 18
PSA PX-10 18" Mid-Length .308 WIN Stainless Steel 16.5" Keymod Lightweight MOE CTR EPT Rifle - 5165448558
PSA PX-10 18
PSA PX-10 18" Mid-Length .308 WIN Stainless Steel 16.5" M-Lok Lightweight MOE CTR EPT Rifle - 5165448727
BEST ANSWER: Because the BCG and barrel extension are unique to this rifle, at this time you'd have to send your barrel off to someone specializing in ARs. They could reuse the barrel extension on a new blank and have to drill the gas port as well as thread the muzzle. I would send the bolt as well so they could headspace it.
Please when will this rifle come back in stock I want to buy it?
MIke J on Jul 6, 2018
Will this ever come back in stock?
J D on Jul 1, 2018
from what I've read this can fire a 7.62 round as well correct?
William Seidler on Jun 7, 2018
BEST ANSWER: Yes, this fires the 7.62x51 or otherwise known as (.308)
Can you fire 308 AP in this without damage?
Wayne C on Jun 7, 2018
BEST ANSWER: As long as your ammunition meets SAAMI pressure and dimensional specifications (as I am sure it does if it is factory produced ammo), you should be able to fire it in this rifle without problems.
IS GUN READY TO FIRE?
leebetty1949 on Jun 8, 2018
BEST ANSWER: Not yet, you need to add ammunition to the magazine.
What size charging handle does this rifle use?
John P on Jul 1, 2018
BEST ANSWER: I'd recommend searching for 7.62 AR charging handles that fit a "Compact AR10". This will not utilize standard DPMS/Armalite AR10 charging handles as they would be too long.
Is this rifle compatible with any other manufacturers Bolts or Bolt Carriers?
janus on Jun 23, 2018
BEST ANSWER: I'd look further in depth about compact AR308s as this one is not compatible to an industry standard LR308 or an Armalite AR10. I bought this rifle not knowing that it wasn't smaller than the standard market AR10. If you look at the lower receiver on the PX10, its not actually the same length as other AR10's on the market. But it most certainly does fire a .308 round. Incompatibility issues would involve the BCG, barrel, and some pieces in the LPK.
Will all aftermarket triggers such as Gisselle and Fostech work in this Lower Receiver?
Mark H on Jun 8, 2018
Is this Magazine compatible with the PSA PX-10?
Andrew on Oct 5, 2018
PSA PX-10 18
PSA PX-10 18" Mid-Length .308 WIN Stainless Steel 13.5" M-Lok Lightweight MOE CTR EPT Rifle - 5165448549
PSA PX-10 18
PSA PX-10 18" Mid-Length .308 WIN Stainless Steel 16.5" M-Lok Lightweight MOE CTR EPT Rifle - 5165448727
PSA PX-10 18
PSA PX-10 18" Mid-Length .308 WIN Stainless Steel 15" Keymod Lightweight MOE Rifle - 516446415
PSA PX-10 .308 Complete Forged Lower Receiver, MOE Edition - 516447160
PSA PX-10 .308 Complete Forged Lower Receiver, MOE Edition - 516447160
DISC    D&H AR-15 .223/5.56mm 10 Round Aluminum Magazine, Grey Teflon ‒ 10-AL-GT-MP-RT
DISC D&H AR-15 .223/5.56mm 10 Round Aluminum Magazine, Grey Teflon ‒ 10-AL-GT-MP-RT
PSA PX-10 18
PSA PX-10 18" Mid-Length .308 WIN Stainless Steel 16.5" Keymod Lightweight MOE CTR EPT Rifle - 5165448558
BEST ANSWER: No it will not work with the PSA PX10 as the PX10 is a .308 caliber lower and need a LR/SR308 magazine
Are the PX10 ever in stock I have been trying to get one for over a year now and they are never in stock I have signed up to be notified when in stock never get notified what do you have to do to get one?
Richard L on Jul 31, 2019

Reviews

There are no reviews for this item. Write Review

Customers Who Viewed This Item Also Viewed