PSAK-47 GF3 Forged MOE Rifle, OD Green

PSAK-47 GF3 Forged MOE Rifle, OD Green

TEMPORARILY OUT OF STOCK

Quick Overview

WARNING: Handling firearms or firearms parts can expose you to lead and other petroleum products known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands thoroughly after handling. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

WARNING: Handling firearms or firearms parts can expose you to lead and other petroleum products known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands thoroughly after handling. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

SKU: 5165491341
UPC: 5165491341
MFR#: 5165450210

Stamped steel receiver
Hammer Forged Front Trunnion
Hammer Forged Bolt
Hammer Forged Carrier
Side Scope Mount
7.62x39 Caliber
1 in 9.5" Twist
Std. 800-yard rear sight leaf
Magpul AK-47 Upper/Lower Handguard, ODG
Magpul AK-47 Grip, ODG
Magpul AKM Stock, ODG
Magpul 30 round magazine (1); Where Allowed by Law

 **Cleaning Rod Not Included

Add To:

The PSAK-47 GF3 was designed from the ground up to be a new standard in AK-47 rifles, utilizing all new precision manufactured parts.  Thoroughly tested in development, we tortured tested to 10,000 rounds to ensure a quality product.  Not to be satisfied with just a good AK-47, we kept improving and now are proud to announce our PSAK-47 Gen3 Hammer Forged (GF3) rifle with a hammer forged bolt, carrier, and front trunnion.

The 4150 barrel is nitride treated for accuracy and durability and is pressed into a new hammer forged front trunnion to ensure the longevity AK-47s are known for.  The hardened steel 1mm receiver features a mil-spec style single hook trigger, and side rail mount.  The front trunnion and bolt carrier are engraved with GF3 to designate the GF3 hammer-forged model.  The rifle is finished with a Magpul AK-47 polymer handguard, Magpul AKM stock, and a Magpul AK-47 Grip. Rifle ships with a 30 round Magpul magazine where allowed by law.

  • Stamped steel receiver
  • Hammer Forged Front Trunnion
  • Hammer Forged Bolt
  • Hammer Forged Carrier
  • Side Scope Mount
  • 7.62x39 Caliber
  • 1 in 9.5" Twist
  • Std. 800-yard rear sight leaf
  • Magpul AK-47 Upper/Lower Handguard, ODG
  • Magpul AK-47 Grip, ODG
  • Magpul AKM Stock, ODG
  • Magpul 30 round magazine (1)

 

 Rifles must be shipped to a valid, current Federal Firearms Licensee (FFL).  Please have the shipping address of your preferred FFL before placing your order.  You will need the FFL information to complete the order.  It is the purchaser's responsibility to be aware of the laws in their state regarding high capacity sporting rifles.

SKU: 5165491341
SKU 5165491341
Brand Palmetto State Armory
Department Firearms - Long Guns
Daily Deal No
Daily Deal Expires No
Unit Price No
Youtube Video No
Free Shipping? No
Free Shipping Qty Label No
Free Shipping Qty No
SKU: 5165491341

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 49 questions Browse 49 questions and 48 answers
Will standard AK furniture fir on this rifle?
Tim W on Nov 23, 2019
BEST ANSWER: yes
Does this have a California compliant version?
RUEL C on Dec 20, 2019
BEST ANSWER: no
How long would this Christmas Deal on this PSAK-47 GF3 be going on?
Luke N on Dec 20, 2019
BEST ANSWER: Currently still on sale, I'm assuming until, or around, the new year
is it 30 round magazine or 10? it says 30 in one place and 10 in another?
denise h on Nov 23, 2019
BEST ANSWER: If you're in a state like CO or CA that do not allow 30 round mags then it will not come with a magazine. Customer service sent me an email notifying me of this after purchasing.
What is the tea trunnion material?
Richie P on Dec 27, 2019
BEST ANSWER: tin cans scavenged by the local winos and sold to the scrap yard.
Made in the US?
Jose O on Dec 12, 2019
BEST ANSWER: Yes
threading on ak47 barrel muzzle?
Steve B on Nov 23, 2019
BEST ANSWER: it comes with the slant brake so the threading is the smaller left hand twist
Does PSA make a picatinny top railed dust cover for this like is on the AK-V ?
Dennis on Nov 24, 2019
BEST ANSWER: not as of yet
Is the inside of the barrel also nitride treated?
Justin R on Dec 15, 2019
BEST ANSWER: Nitrate treatment has to do with the way the metal is made. So yes the whole barrel is nitrated, inside and out.
A pistol form of this, with the folding Brace, at a good price point, would be a winner. Any thing coming?
Mary R on Dec 12, 2019
BEST ANSWER: Adding a brace is simple especially for what you already save on it. Their other ak offerings like the AK-E and ak-v might be more for you.
Can you ship this model to california?
Felipe A on Dec 15, 2019
BEST ANSWER: Where?
Does this gun shot metal cased bullets?
Munsters on Dec 20, 2019
BEST ANSWER: Any AK will shoot steel case rounds.
What is the unloaded weight of the rifle?
Chadwick S on Feb 4, 2020
Can I replace this stock with my own folding stock?
Darron L on Jan 23, 2020
Does this take steel mags as well?
Jesse O on Dec 20, 2019
BEST ANSWER: I am currently 0/1 on steel magazines fitting it. P-Mags have a more pronounced ridge that locks it into the magazine well; and the steel magazine I tried did not have a large enough ridge to actually lock in place. You can either try to find steel magazines with wider and larger ridges, stick to P-Mags, or machine out your magazine well.
full or semi bolt carrier?
JohnnyR on Jan 20, 2020
PSAK-47 GF3 Forged MOE Rifle, OD Green
PSAK-47 GF3 Forged MOE Rifle, OD Green
PSAK-47 GB2
PSAK-47 GB2 "MOEkov" Rifle - 516444689
BEST ANSWER: Bolt is as "automatic as any AK bolt. You need to do a lot to the rifle to make it automatic, for instance providing for your family as you rot in Federal Prison.
Does the stock. Fold??
Bruce on Nov 26, 2019
BEST ANSWER: Hello,

No, it does not fold.

Best Regards,
Palmetto State Armory Customer Service
Is this 308 compatible?
Ronnie R on Nov 25, 2019
BEST ANSWER: Hello,

No, it is not.

Best Regards,
Palmetto State Armory Customer Service
Do these rifles have issues with steel casings?
Jesse O on Jan 29, 2020
BEST ANSWER: no
What’s the total weight?
Jodri on Jan 28, 2020
BEST ANSWER: NO
Is the barrel and chamber chrome lined/plated ?
William A P on Dec 28, 2019
BEST ANSWER: No, the barrel is nitrated. They did say there would be a model coming out soon with chrome lined barrels.
Is the gas tube vented?
Dillon Paul C on Dec 25, 2019
BEST ANSWER: Nyet.
When will it be back in stock ?
Tia T on Apr 6, 2020
Does anyone know if this will work with franklin armory binary trigger?
Brett Jines on Jan 29, 2020
What is the overall length of the PSAK MOE?
chris a on Jan 22, 2020
Bought this, it’s my first AK. Upon disassembling, had trouble getting the lever for the gas tube to close. Any suggestions?
Greg T on Jan 31, 2020
BEST ANSWER: YES! I had the same issue. I used a small file to clearance the roller that engages the gas tube. works fine now. Hope this helps!
I saw it says 30 round mag and also 10 round mag. I live in a mag restricted state. Will I get a 10 round mag?
Albert on Jan 4, 2020
BEST ANSWER: not with this deal
can you get it with wood furniture?
Paul L on Feb 17, 2020
BEST ANSWER: No. You have to buy the wood furniture model.
I cannot tell from the photos but will this rifle mount a bayonet?
Dennis M on Feb 14, 2020
BEST ANSWER: It should take an AKM bayonet.
Is the barrel threaded on the end for a silencer?
Eric R on Feb 12, 2020
BEST ANSWER: ...It's threaded. But if/how this gun fits with a suppressor is going to depend as much on what kind of system you're using and how concentric your particular barrel is. So, I'd say maybe.

Reviews

4.2 / 5.0
28 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
16
7
1
3
1
Had some issues with mine.
Picked mine up a month or so ago from my FFL holder. Wish I could give it 5 stars but had a few minor problems with it. The front sight post was not a tight fit and the safety lever was sloppy. Called PSA customer service who wanted me to send the rifle back. As easy as it is to fix said problems and to avoid the pain of boxing it up and sending it back I took 5 minutes of my time to fix the issues. The most troubling problem I had was a quite a few failures to feed. After trying several types of magazines and ammo and still having way to many FTF I used some polishing compound on the chamber. That seems to have taken care of that issue. The rifle now runs 100%. The rifle does have a nice fit and finish to it. The Magpul furniture makes it a nice handling rifle. Accuracy is better then what I have seen in other AKs. To be fair I called customer service twice about the shortcomings and they urged me to return the rifle for repair.
March 13, 2020
I really like this gun!
although I have many firearms, I did not have an AK, so this review is not a comparison between AK variants, but is specific to the PSA model only. Shipping to my FFL was fairly quick, and the gun came well packaged. I cleaned and lubed it, and off to the range, where I couldn't get on paper at 100 yds... undeterred a checked out to youtube videos and bought a front sight adjustment tool and was quickly able to get it dialed in. We mostly just shoot steel plates at 100 yds an so I haven't shot it really for groups, but I would guess even with the cheapest of steel cased stuff I am hitting the 8" gong every time, 6" gong most of the time, and 4" gong maybe 1 out of 4, but to be fair, my eyesight isn't that good, and a 4" gong at 100 yards is pretty dang small..

the only mags I use are P-mags because they are the cheapest and because they work. Havent tried any others.

only failure I had was the shoulder stock thru bold was never screwed into the slant block nut, and the nut eventually worked its way forward and under the trigger preventing the trigger from tripping the sear. reassembled it, and used a bit of lock tite and it should be good to go now. also, the trigger pull was horrible.. long, heavy and gritty.. got after it with a Dremel and some polishing compound. now it is just long.. but hey, I didn't by this thing to be my bench rest rifle!

all in all, I think it is a great bargain, and my kids love to shoot the thing, as do I! it does spew brass every direction know to man, and with much force, so a brass shield is a must if shooting at a range with folks to your right! Ha!

I also modified the safety to add a bolt hold open feature.

will likely buy another one.. or two!
March 1, 2020
Great rifle
This has been a great rifle. Out of the box it looked and felt great. PMAGS seated and fit really well, using mostly magpul gen 2 mags. Rifle has run fine so far with mostly cheaper ammunition. Wolf steel, tula hp and fmj as well as their copper jacket target rounds.

Everything functioned great, sighted it in at 300 meters with the iron sights and really happy with how it shot. Butt stock has a bit of rubber as well which certainly softens the kick.

Really excited to make use of the optics mount to put something on that will make it a little more comfortable to shoot at range. Pretty easy to hit consistently out at 200 yards, but myself as a shooter I do find myself hitting at about a minute of man at 200, but it seems like it could do better with a keener eyesight.
March 1, 2020
An impressive rifle, especially for the price.
I've been extremely impressed by the quality of this AK. Fit and finish is excellent. The rivets are all well done. The only magazines I had issues with were the Magpul AK/AKM GEN M3 (with the metal tabs). I had to file the back tab a bit on all three of them to get it to lock into place, but I'd rather do that then have them be loose as a goose.
February 19, 2020
PLEASE READ BEFORE BUYING
I just bought this gun and Im anxiously waiting to hear back from customer service on how my problem can be resolved...I'll write another review accordingly. BUT HERE'S WHAT YOU HAVE TO KNOW ABOUT THIS GUN...#1 IT DOES NOT ACCEPT VARIETY OF MAGS. in fact, the one I bought only accepted the single mag that came in the box. Thats it. It wouldnt even accept other Magpul mags of same model/generation. It wouldnt accept Tapco mags, Euro mags, new or surplus metal mags. Nothing! Few guns accept any/all mags but I know that a 1-mag rifle is NOT what PSA is trying to produce. #2 If you still order this gun then TAKE VARIETY OF MAGS WITH YOU AND TEST THEM WHEN YOU PICK IT UP AT YOUR FFL. #3 DO NOT, DO NOT, DO NOT SIGN THE TRANSFER PAPERWORK UNTIL YOU INSPECT THE GUN! This actually applies to all internet-bought firearms. All sales are final with guns, so you cant get your money back if theres anything wrong with it or you dont like it. Had i done this with my PSA i wouldve promptly sent the gun back for either a refund or exchange once I found out something was wrong with it. #4 INSPECT EVERYTHING ELSE ABOUT THE GUN BEFORE SIGNING. As for mine, I do love the trigger, was excited to see that it had a pin retention plate vs spring. Rivets were...very good. Not perfect but looked pretty solid for budget gun. Same for sight post and gas block pins. Great finish. Wasnt a fan of Magpul furniture but I am now because of this gun. #5 NOBODY IS PERFECT. Every company makes at least some lemons during production, even manufacturers like PSA who have nothing but glowing reviews online. So im not mad that my gun is no good. I just got caught up in the hype around the PSAK G3 and assumed my brand new, American-made gun would be perfect upon arrival. Heck, it even came with the signed inspection card of the person who checked my gunn I was impressed! But at end of the day a gun is a gun, you gotta check examine each one especially budget ones like PSA. Im optimistic that they'll let me send the gun back for repairs and that they'll get me a rifle that lives up to their reputation. And at this point I still want to try their other guns in future. It just sucks cause i saved money to buy this gun and will have wait for who knows how long before this gets resolved. But thats how it goes sometimes. I just want others to learn from MY mistake.
February 18, 2020
Response from Palmetto State Armory
We do apologize for that. Since all of our parts and firearms are covered by our Lifetime Warranty, if you have any issues arise from the craftsmanship of the product, we can either have select parts sent to you for you to replace, or we can have the item brought in, at no cost to you, so we can repair or replace the defective product. Please contact Customer Service with your Order Number so we may resolve this issue.
February 19, 2020
Casey S Staff
Bolt carrier VERY poorly machined
After every shot the chamber stay stuck open, and not able to push forward to close. After inspecting it realized the bolt is catching on the bolt carrier due to machining that looks like a child dremmeled out the slot. It's back in for "repairs" now. Wasn't able to shoot more than 8 rounds.
February 17, 2020
Great Rifle for the $!
Got this rifle for $610 shipped to my local FFL. Well worth the money especially with Magpul furniture and how clean the rifle is. Riveting is super clean. Super tight construction with a great feel. My first AK but after looking at other s and doing research, glad I picked up this USA made AK.
Changed out the flash hider, but PSA makes a great rifle!
Changed out the flash hider, but PSA makes a great rifle!
February 15, 2020
Very nice AKM.
My first AK platform rifle and am highly impressed. The price was excellent. Fit and finish were outstanding. That slant muzzle brake had to go, and was replaced with an AK 74 style device. The MOE furniture was a very nice touch. I haven't taken it to the range yet but am looking forward to it. Really haven't messed with an AK since RVN in '72 and am totally happy with PSA's version.
February 14, 2020
Sweet Rifle
Bought this rifle in black last June, Installed the Zhukov folding stock (The YUGO does not fit) and ak operators union $39 fighter muzzle brake and the primary arms 1x cyclops sight. All that was left was to give my rifle a girls name. "Nadia" has operated flawlessly 3500 rounds down range and wear marks in the usual places are minimal. Nadia gets a good cleaning and greasing after every range day. (Not necessary. But it is just me) .Love this weapon and would recommend the GF3 to anyone wanting a quality reliable USA made AK at a unbelievable price! Great job PSA!
February 12, 2020
Great rifle, great price, but...
I just picked up my PSAK-47 rifle today (2/5/20) and stripped it down to clean it. Everything looked good, felt good, but when I went to reassemble, the take down for the gas tube wouldn't engage and lock down. It appeared to be a clearance issue between the roller and the gas tube. Using the method described in PSA' video about using the bolt to lock the gas tube down, the roller bent. After a little filing down the roller, it finally engaged and locked the gas tube down. I know it supposed to be tight, but not that tight. Anyway, it was a minor inconvenience and functions properly now. I would recommend this rifle to anyone who is in the market for one. just be aware of the gas tube roller issue.
February 5, 2020

Customers Who Viewed This Item Also Viewed